···
Log in / Register

What brand of tires does the Jetour X70 use?

4 Answers
MiaRose
07/30/25 1:47am
Jetour X70 uses Jinyu tires, available in two models: 215/60-R17 and 235/60-R18. Jinyu Tire is a professional automotive tire R&D and manufacturing company. The tires used in the Jetour X70 emphasize grip and handling stability. More details are as follows: 1. Tires are round, elastic rubber products mounted on various vehicles or machinery for ground rolling. They are typically installed on metal rims to support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain driving performance. 2. Tires often operate under complex and demanding conditions, enduring various deformations, loads, forces, and extreme temperatures during use. Therefore, they must possess high load-bearing capacity, traction performance, and shock absorption. 3. Additionally, they must exhibit high wear resistance and flexibility, along with low rolling resistance and heat generation. Half of the world's rubber consumption is used in tire production, highlighting the significant demand for rubber in tire manufacturing.
Was this review help?
15
1
Share
MaciMarie
08/15/25 7:38am
I've been driving the Jetour X70 for several years. The most common original tires are from Giti, such as the 225/60 R18 specification, which provide stable grip and are sufficient for daily driving. However, there may be variations depending on the year or model configuration. Some friends' cars use Wanli or Linglong tires, which are slightly noisier but more wear-resistant. It's advisable to check the sidewall markings to confirm the tire brand and ask the salesperson about the specific model when purchasing the car. Choosing the right tires is crucial—for city commuting, opt for wear-resistant types, while for highway driving, it's best to use premium brands for enhanced safety. Don’t overlook regular maintenance; check tire pressure and wear every few months, and replace them promptly when they age. A new set of tires costing around 1,000 yuan is a worry-free investment, as tire issues can affect braking and fuel consumption.
Was this review help?
8
5
Share
Expand All
BryceAnn
10/21/25 2:28am
I'm a car enthusiast and have researched the tire configuration of the Jetour X70. It usually comes standard with domestic economy brands like Linglong or Triangle, while the high-performance version is equipped with Hankook or Michelin, mostly in size 225/60 R18. The tire brand has a significant impact, such as on grip, handling, and noise levels. For example, Giti performs reliably on slippery roads but is slightly harder. It's recommended to check the owner's manual or confirm the brand at a 4S store to match the original specifications to avoid affecting the ESP system. For daily driving, pay attention to checking the tread depth; replacing tires when they are more than half worn can extend their lifespan. Before driving on highways, check the tire pressure for safety.
Was this review help?
14
2
Share
Expand All
VanLorenzo
12/04/25 2:56am
I recently got my hands on a Jetour X70, and the original tires are Linglong brand. They feel quite stable to drive on, with the size 225/60 R18 easily recognizable by the logo on the sidewall. The brand may vary depending on the batch, for example, mid-range models might come with Goodride tires. As a beginner, I recommend checking the manual to confirm the tire type and regularly checking tire pressure for both fuel efficiency and safety. Choosing the right tires for rainy days can prevent skidding. I plan to switch to a quieter brand in two years.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

How to Apply for a Beijing Electronic Driver's License?

Enter the homepage of the Traffic Management 12123 app. Under the driver's license services, submit your driver's license photo on the login page, then enter your ID number and password to log in. Submit your driver's license photo to complete the application. Find your driver's license and click to view the electronic driver's license.
18
4
Share

Revving the Engine in P or N Gear?

You can rev the engine in either P (Park) or N (Neutral) gear, but it is not recommended to do this frequently. The potential harms are as follows: 1. When parked in P gear, the mechanical lock gear teeth can lock the transmission output, and the engine is already disconnected from the transmission, with no power transfer. Revving the engine only increases the engine speed, and the power is not transmitted to the transmission. Like in N gear, it is just idling, and the car will not move. 2. If you only do this occasionally, it will not have much impact on the car. However, over time, the engine temperature will rise rapidly, and the radiator's cooling efficiency will become poor without cold air intake. In severe cases, it may even burn the big and small bearings under the piston. Additionally, it has adverse effects on belts and gears.
18
0
Share

What is the Difference Between Fog Lights and Position Lights?

The difference between fog lights and position lights lies in their functions, as detailed below: 1. Automotive fog lights are installed at the front and rear of the vehicle. They are used to illuminate the road and provide safety warnings during rainy or foggy weather conditions, enhancing visibility for the driver and other traffic participants. 2. Position lights are warning lights that serve to alert other vehicles. According to safety standards, vehicles with a height exceeding three meters must be equipped with position lights. Below is an introduction to other common vehicle lights: 1. Headlights, or combination headlights, are located at the front of the vehicle. They primarily serve illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling the driver to travel safely at night. 2. Combination taillights are located at the rear of the vehicle and mainly serve illumination and signaling functions. 3. Turn signals are lights used to indicate left or right turns to other road users.
5
2
Share

What causes the truck's STOP light to illuminate?

The truck's STOP light is a mandatory parking fault warning light, indicating that the driver should not continue driving and must immediately stop to check for engine faults. The STOP light usually illuminates simultaneously with other warning lights such as low oil pressure, low brake fluid level, or excessively high water temperature. In such cases, the engine must be shut down to prevent potential damage. Here is more information about the STOP light: 1. The STOP light is not a standalone indicator. The dashboard also includes other warning lights for water temperature, oil pressure, air pressure, engine, and cab. The STOP light will activate if any of these components encounter issues. 2. There are numerous reasons why the STOP light may illuminate, including low engine oil pressure, low brake fluid level, excessively high water temperature, among others. These situations commonly trigger the STOP light.
2
4
Share

What causes the jerking when shifting from 3rd to 4th gear in the new Santana?

New Santana jerking when shifting from 3rd to 4th gear is caused by the mismatch between engine speed and vehicle speed. Causes of jerking during upshifting: The engine speed does not match the current vehicle speed, meaning there is a speed difference between the engine speed and the clutch disc speed. When lifting the clutch during gear shifting, if the engine speed does not match the current vehicle speed (i.e., there is a speed difference between the engine and clutch disc), jerking will occur. Effects of jerking on the vehicle: Gearshift jerking is caused by the speed difference between the engine and clutch disc. When there's a speed difference, the connection between clutch and engine becomes imperfect. The force interaction between clutch and engine accelerates clutch wear. The shifting impact also damages transmission gears. The sudden engine-driven transmission speed increase leads to higher fuel consumption.
6
1
Share

What are the symptoms of a faulty crankshaft sensor in a car?

Crankshaft sensor failure exhibits the following symptoms: 1. The malfunction indicator light illuminates. 2. The engine can continue operating using the camshaft position sensor, but the starting time may be prolonged. Additionally, the cruise control and exhaust brake systems may malfunction, accompanied by engine shaking and white smoke emission. However, there is no significant change in power performance, and throttle response remains normal. 3. Diagnostic trouble codes may be generated. 4. Abnormal signal disc readings. Introduction to crankshaft sensors: 1. The crankshaft sensor plays a crucial role in the sensor system. It determines the crankshaft position, monitors engine speed, and detects signals including the top dead center signals for each cylinder (used for ignition control) and the first cylinder's top dead center signal (used for sequential fuel injection control). 2. The crankshaft sensor typically works in conjunction with the camshaft position sensor to determine the basic ignition timing.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.