What brand of tires does the Honda City use?

1 Answers
DelLukas
07/30/25 2:07am
The Honda City uses Bridgestone or Dunlop tires, and some models may also use Michelin. The Honda City comes with three types of wheel rims, categorized as S-grade, V-grade, and SV-grade. The tire width is 175 mm, the aspect ratio is 65, the radial tire size is 15R, and the wheel rim diameter is 15 inches. The Honda City is equipped with a 5-speed manual transmission and a 1.5L 131-horsepower L4 engine. The vehicle's length, width, and height are 4450 mm, 1695 mm, and 1477 mm, respectively. The new generation of the Honda City will be unveiled at the Beijing Auto Show and is set to launch within 2015.
Was this review help?
9
3
Share
More Forum Discussions

What car does the 'm' logo represent?

The 'm' car logo represents Maybach vehicles. Maybach is a German automobile manufacturer, and its models include: Maybach Zeppelin, Maybach Landaulet, Maybach Exelero, Maybach 62S, Maybach 62, etc. Taking the 2011 Maybach 62S as an example, it belongs to the full-size luxury car category with body dimensions of: length 6171mm, width 1980mm, height 1573mm, and a wheelbase of 3827mm. The 2011 Maybach 62S is equipped with a 6.0T twin-turbocharged engine, delivering a maximum horsepower of 630PS, maximum power of 463kW, and maximum power speed ranging from 4800 to 5100 rpm. It is paired with a 5-speed automatic transmission.
2
1
Share

What does the ESC indicator in a car mean?

ESC in a car refers to the Electronic Stability Control system, with its switch located on the center console. Its function is to monitor the vehicle's driving state and prevent the car from deviating from the ideal trajectory during emergency obstacle avoidance or when understeer or oversteer occurs during turns. The working principle of the vehicle stability system is: it judges the driving state based on sensor signals and uses a control unit for precise calculations. When rotation, understeer, or oversteer occurs, it individually controls each wheel to enhance vehicle stability. Reasons for ESC system failure include: 1. ABS pump malfunction; 2. Throttle body contamination; 3. Faulty or dirty speed sensor causing incorrect signal output leading to the light illumination.
9
0
Share

How to Reset the Maintenance Reminder Light on a Chevrolet Captiva?

To reset the maintenance reminder light on a Chevrolet Captiva, follow these steps: 1. With the engine off, turn the ignition switch to the ON/RUN position. 2. Fully depress and release the accelerator pedal three times within five seconds. 3. If the engine oil change indicator does not appear, the system has been successfully reset. Taking the 2017 Captiva as an example, its body dimensions are: length 4690mm, width 1868mm, height 1756mm, with a wheelbase of 2707mm and a fuel tank capacity of 65 liters. The 2017 Captiva is equipped with a 2.4L naturally aspirated engine, delivering a maximum power of 123kW and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
11
2
Share

What is the appropriate RPM during the car break-in period?

The appropriate RPM during the car break-in period is 700 to 800. The break-in period refers to the initial driving distance after a new car leaves the factory, during which the engine components smoothly adapt to each other. During this period, the car's ability to adapt to the environment can be improved, and any protrusions on the parts can be worn down. Precautions to take during the car break-in period include: 1. Warm up the engine before starting; 2. Avoid emergency braking; 3. Avoid overloading; 4. Avoid long-distance driving; 5. Avoid high-speed driving; 6. Use high-quality gasoline; 7. Do not remove the speed limiter prematurely; 8. Shift gears in a timely manner; 9. Properly adjust the ignition and fuel supply systems.
8
2
Share

What are the precautions after replacing the front windshield?

Precautions after replacing the front windshield: 1. Do not wash the car within three days after replacing the windshield, and remove the tape fixing the windshield position after three days; 2. Try to avoid driving on excessively bumpy roads, and avoid emergency braking and rapid acceleration to prevent the windshield from shifting; 3. Do not insert parking permits or other cards into the gap between the front windshield and the center console. The glass adhesive has a curing time, and rainwater will affect its viscosity, leading to poor glass fixation, easy loosening, and potential safety hazards. When washing the car, the cleaning staff will use high-pressure water guns to clean the car body, which may cause the improperly fixed glass to fall off and even lead to water damage to the car.
9
1
Share

How to Remove Water Stains from a White Car?

To remove water stains from a white car, follow these steps: 1. Wash the car thoroughly and dry it; 2. Soak a towel in water, wring it slightly, and apply some essential balm (like Tiger Balm) to the towel; 3. Gently wipe the stained areas with the towel soaked in essential balm, repeating every 2 minutes until the stains disappear. For maintaining a white car: 1. Clean dust off the car body promptly before, during, and after use to reduce static electricity attracting dust; 2. After rain, water stains on the car body will gradually shrink, increasing the concentration of acidic substances in the rainwater, so rinse with clean water as soon as possible to protect the paint; 3. Use dedicated car wash detergent and neutral water for washing, avoiding highly alkaline detergents or soap to prevent stripping the protective oils from the paint and accelerating paint aging.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.