What brand of tires does the Geely Boyue use?

2 Answers
DelOwen
07/29/25 3:22am
Mid to low trim models are equipped with Giti Comfort-SUV-520 tires. Another option is the Cooper Discoverer-HTS, which is installed on the top trim models. Below is additional information: More details about the Boyue's tires are as follows: In terms of tire size, only the 2.0L manual Zhiyue version uses 225/65R17 specifications, while other models feature 18-inch large wheels with 225/60R18 dimensions. Tire replacement recommendations: When replacing tires, it is essential to use tires with the same size, speed rating, and load capacity as the original tires. Using tires of different brands, structures, or tread patterns can adversely affect the vehicle's driving, braking, handling, ground clearance, body-to-tire clearance, snow chain clearance, speedometer calibration, headlight alignment, and bumper height.
Was this review help?
16
5
Share
McJaxson
08/12/25 7:13am
Hey, the tire brands for the Geely Boyue aren't fixed—different configurations affect the choices. From what I recall, the Giti brand is commonly used, especially on the Boyue Pro, with a 215/60 R17 size that's quite durable. It offers good grip for daily driving and solid wear resistance. Some car owners mentioned that post-2019 models might come with Maxxis tires, which offer better value for money. The key thing about tires depends on the model year and factory configuration, so it's best to check the wheel label or manual when buying. Personally, I think choosing the right tires makes driving smoother, and regularly checking tire pressure and wear can prevent sudden issues—extending their lifespan is definitely important. Oh, and their adaptability in different climates is worth discussing too, like avoiding excessive tire pressure during hot summer months.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What does 'sports' mean on a car in Chinese?

When the car dashboard displays 'sport', it indicates the sports mode. Below is a detailed introduction to the car driving modes: 1. Eco mode. In this mode, the fuel injection volume and transmission control module are managed by the computer, which adjusts to the most fuel-efficient driving style. This mode offers the lowest fuel consumption but also the least power. 2. Comfort mode. Also known as standard mode, it balances power and fuel efficiency. In this mode, the power output and air conditioning settings are optimized for energy saving, making it most suitable for everyday driving. 3. Sports mode. This mode is generally used in road conditions requiring higher power. After switching to this mode, the battery's energy output increases significantly in a short time, and the traction and stability control systems reduce their intervention in driving operations. This results in quicker car response and more noticeable steering operations. This mode has the highest fuel consumption but also the most power. 4. Snow mode. This mode primarily works by suppressing the car's torque to reduce wheel slip and spinning when driving on snow.
7
5
Share

What does collision warning with automatic braking mean?

The meaning of collision warning with automatic braking is as follows: 1. Collision warning uses methods such as ultrasonic, laser, infrared, or microwave to detect data for active collision avoidance, effectively preventing traffic accidents by decelerating. 2. Automatic braking refers to the vehicle applying the brakes on its own when a situation arises, rather than the driver manually stepping on the brake pedal. Additional information about automatic braking is as follows: 1. Principle: A distance-measuring sensor at the front of the vehicle continuously monitors the distance to the vehicle ahead. Based on the vehicle's speed and relative speed, it calculates whether the vehicle is in a safe driving state using a mathematical model and control algorithm. If the distance is too close, it immediately alerts the driver to decelerate. If the driver fails to brake in time, the system first applies light braking as a warning. If the danger persists, the system will apply continuous hard braking until the danger is resolved. 2. Automatic braking: The automatic braking function refers to the vehicle's ability to generate braking force on its own to decelerate when encountering sudden hazardous situations during normal driving, even without adaptive cruise control. 3. Active safety systems include electronic devices such as ABS and ESP, while passive safety systems involve energy-absorbing vehicle structures, seat belts, airbags, etc.
12
2
Share

How Long Does It Take to Fully Charge a Tesla?

Tesla charging time depends on the charging method: 1. The simplest charging method: The standard household circuit in the U.S. is 120V, 12A, which allows direct charging by connecting the charging cable to a 110V plug, then plugging it into a 110V socket, and connecting the other end of the cable to the car. The current charges the battery under the car via the built-in charger. It takes 46 hours and 17 minutes to fully charge. 2. Modified circuit charging method: TESLA recommends upgrading the garage circuit to 240V, 40A. A standard Tesla with a single charger takes 8 hours and 19 minutes to fully charge. 3. High-efficiency charging method: Installing a high-power wall-mounted charging connector in the garage or outdoors, with a voltage range of 208-250V, 60Hz, and an adjustable current range of 40A to 100A. It takes 8 hours and 19 minutes to fully charge. With the optional built-in dual charger, it only takes 4 hours and 9 minutes to fully charge. 4. Tesla Supercharger charging: The Supercharger bypasses the onboard charger and directly supplies DC power to the battery. Charging to half capacity takes only half an hour, and this time will soon be reduced to 20 minutes.
4
4
Share

What type of driver's license is required to drive a medium-sized bus?

To drive a medium-sized bus, a B1 driver's license is required. The B1 license allows the holder to operate medium-sized passenger vehicles (including urban buses with a capacity of 10 to 19 passengers) as well as vehicle types C1, C2, C3, C4, and M. The first category is medium-sized buses with fewer than 19 seats. The second category is medium-sized passenger vehicles with 19 to 32 seats. The third category is urban buses. Additional information: Requirements for upgrading from C1 to B1: The applicant must have held a C1 driver's license for at least three years, with no record of full penalty points in the last two scoring cycles, no record of drunk driving, and no record of being primarily or fully responsible in a fatal accident. The applicant must be between 21 and 50 years old, with a height of at least 155 cm, and have uncorrected or corrected visual acuity of 5.0 on the logarithmic visual acuity chart. The upgrade can only be processed at the applicant's registered residence location. Only those who meet all the above conditions can apply for the B1 license upgrade.
4
0
Share

How to Adjust the Valve Clearance of the Aowei 13-liter Engine?

Locate the top dead center of the first cylinder piston at the end of compression, adjust half of the valves, then rotate the crankshaft one full turn to adjust the remaining half of the valve clearances. When adjusting the valve clearances of the engine, besides paying attention to the adjustment sequence, the size of the clearance is also crucial. If the valve clearance is adjusted too small, the valve may not close tightly, leading to a decrease in engine power. If the clearance is adjusted too large, it will increase the number of impacts on the valve train components, accelerating wear. It may also cause delayed valve opening, resulting in reduced engine performance and inability to operate normally. Precautions for engine use are as follows: 1. Overheating: If the engine overheats while driving, you can release the accelerator pedal, shift the transmission to a lower gear, or perform both actions simultaneously to reduce power output until the engine temperature returns to the normal operating range. 2. High-sulfur fuel: Under certain operating conditions, such as low speed, low load, or starting a work cycle after shutdown, the operating temperature of the engine's after-treatment catalyst may not be very high. If unauthorized high-sulfur fuel is used, ammonium sulfate may accumulate on the catalyst, reducing the NOx conversion efficiency in the SCR system. As a result, the engine may fail to meet emission regulations.
12
0
Share

What is the refrigerant in the air conditioner called?

Refrigerant is also known as refrigeration working fluid. Here is an introduction to refrigerant: 1. In some southern regions, it is commonly known as "snow seed." It is a working substance that continuously circulates in the refrigeration system and achieves cooling through changes in its own state. 2. The refrigerant absorbs heat from the cooled medium (such as water or air) in the evaporator and vaporizes, then transfers the heat to the surrounding air or water in the condenser and condenses. Precautions for adding refrigerant to a car: 1. Before using the machine, the oil plug on the vacuum pump must be replaced, and the exhaust oil plug must be swapped out. 2. The vacuum gauge must not be subjected to high pressure. The vacuum gauge valve V3 must be closed before connecting the high and low-pressure pipes and adding refrigerant. 3. The force used to close the valves should be moderate. Tightening force should be minimized as much as possible without causing leaks to extend the service life of the valves. However, even if the sealing parts are damaged after long-term use, repair and replacement are very simple. 4. Pure refrigerant without solid impurities should be used. 5. All valves must be closed after the operation is completed.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.