What brand of tires does the Fista use?

2 Answers
Patricia
07/24/25 7:26am
The original tires equipped on the Hyundai Fista are from brands such as Nexen and Maxxis. The tire sizes vary by configuration and include 205/55R16, 225/45R17, and 225/40R18 models. Steps to replace the tires on the Hyundai Fista: 1. Park the vehicle on a flat surface. If a breakdown occurs on the road, place a safety warning sign at least 150 meters behind the vehicle. Then, loosen all the tire nuts. The nuts should be removed in a diagonal order to avoid damaging the wheel hub. 2. Position the jack directly beneath the support point and slowly adjust it to raise the chassis. Once the tire is off the ground, it can be removed. If the tire fits too tightly to be taken off directly, apply moderate force by kicking it. 3. Place the new tire and manually secure the nuts. Do not overtighten the nuts to avoid stripping the threads. Tightening the nuts should be done when the wheel is in contact with the ground.
Was this review help?
14
5
Share
VanAngela
08/11/25 3:09am
I've been driving the Hyundai Fista for over three years now. When I first bought it, I noticed the Hankook logo on the side of the tires, which should be the Hankook brand, a pretty common original equipment configuration. These tires have decent wear resistance—I've driven 40,000 kilometers, and they haven't shown much wear. During regular maintenance, I always check the tire pressure to ensure it's correct, keeping it slightly higher in summer and lower in winter to avoid blowouts. If there are stones or potholes on the road, I drive slowly to prevent punctures. If you find the noise too loud or the grip insufficient, you might consider switching to other brands like Michelin or Bridgestone, but the original Hankook tires are hassle-free and cost-effective. Regularly cleaning the rims can also extend tire life—I recommend checking them monthly, especially before long trips. Overall, the Fista with Hankook tires offers good value for daily commuting, but different batches or configurations might vary, so it's best to check your vehicle manual to confirm.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the recommended interval for wheel alignment?

The recommended interval for wheel alignment is once a year or every 10,000 to 20,000 kilometers. Situations that require wheel alignment include: 1. Damage to the chassis and suspension caused by an accident; 2. Replacement of the steering system or its components; 3. Unilateral wear on the front or rear tires; 4. Replacement or adjustment of the suspension system. Wheel alignment involves adjusting the geometric angles of the tires, steering, and suspension components to ensure tight contact between the tires and the ground. The steps for performing a wheel alignment are: 1. Connect the power and turn on the machine; 2. Attach the target to the wheels, with the target facing the camera; 3. Click to enter the measurement program on the computer page; 4. Open the camera to confirm if the target is correctly positioned, and adjust if necessary; 5. Click to measure and follow the prompts to obtain the measurement data; 6. Adjust the total toe data of the vehicle to the standard green range.
10
2
Share

Where is the computer connector of Huansu S3 located?

The computer connector of Huansu S3 is located under the glove box on the passenger side. Move the passenger seat backward to see it. Taking the 2018 Huansu S3 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4380mm in length, 1730mm in width, and 1760mm in height, a wheelbase of 2685mm, a fuel tank capacity of 55 liters, and a curb weight of 1335kg. The front suspension of the 2018 Huansu S3 is a MacPherson independent suspension, and the rear suspension is a five-link rear suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 113PS, a maximum power of 83kW, and a maximum torque of 150Nm, paired with a 5-speed manual transmission.
18
0
Share

What are the reasons for the starter's failure to operate?

The reasons for the starter's failure to operate are: 1. Severe battery depletion, sulfation, short circuit, or damage to the main power switch; 2. Loose or poor contact of terminal post wires; 3. Loose or detached engine grounding wire; 4. Poor contact between the commutator and brushes or grounding of insulated brushes; 5. Damage to the field winding or armature winding; 6. Open circuit in the pull-in coil or hold-in coil of the electromagnetic switch, or poor contact of the switch contact disc. The method for direct starting of the starter is: 1. The starting time should not exceed 5 seconds, and after starting, idle for 2 minutes to allow the battery to recover; 2. Keep the battery warm when starting in low temperatures to ensure sufficient starting capacity.
9
0
Share

What are the damages to a car if the engine oil is not changed?

Not changing the engine oil can cause the following damages to a car: increased engine wear, shortened engine lifespan, louder operating noise, and noticeable vibrations. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and engine components; 4. To buffer the pressure rise at the engine cylinder port; 5. To flush away dirt generated on the working surfaces of components. Signs that indicate the need for an oil change include: 1. Checking the oil viscosity—if there is no viscosity, the oil needs to be changed; 2. The oil color turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. An abnormal smell from the oil.
11
4
Share

What type of oil should be used for the Changan CS75?

Changan CS75 should use 5W30 oil. The functions of engine oil are: 1. To reduce friction and high temperatures; 2. To minimize gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in the engine cylinder ports; 5. To clean dirt generated on the working surfaces of components. The functions of transmission oil are: 1. To maintain the cleanliness of the gear system; 2. To lubricate the transmission components. Taking the 2021 Changan CS75 as an example, it is a compact SUV with the following dimensions: length 4650mm, width 1850mm, height 1715mm, wheelbase 2700mm, fuel tank capacity 58 liters, and trunk capacity 520 liters.
11
0
Share

What engine does the Baojun RS3 have?

The Baojun RS3 is equipped with a 1.5L naturally aspirated engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing the gas to expand and push the pistons to perform work. Taking the 2020 Baojun RS3 as an example, it belongs to the small SUV category, with body dimensions of: length 4300mm, width 1750mm, height 1600mm, a wheelbase of 2550mm, a fuel tank capacity of 45 liters, and a curb weight of 1206kg. The 2020 Baojun RS3 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It delivers a maximum horsepower of 99 PS, a maximum power of 73 kW, and a maximum torque of 143 Nm, paired with a 6-speed manual transmission.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.