···
Log in / Register

What brand of tires does the Emgrand use?

4 Answers
Sheldon
07/24/25 2:45pm
Emgrand tires mostly use the brands Giti and Linglong. Here is a detailed introduction to the functions of tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit the torque of traction and braking to ensure good adhesion between the wheels and the road surface, thereby improving the car's power, braking, and passability; work together with the car's suspension to mitigate the impact during driving and dampen the resulting vibrations. 3. Prevent severe vibrations and damage to car components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy-saving economy.
Was this review help?
12
5
Share
KiraLynn
08/10/25 7:09am
I've been driving my Emgrand for a while now, and it came with Linglong or Kumho tires depending on which year's model you buy. Different trims and production batches may have different brands. For example, my 2020 Emgrand originally had Linglong tires, which provided decent comfort but were a bit noisy at highway speeds. I later switched to Kumho tires for better grip. The tire brand significantly impacts safety, so when choosing tires, pay attention to tread depth and wear condition, and regularly check for run-flat capability. As a family car, the Emgrand pairs well with these domestic or joint-venture tire brands, offering good value and durability for about five years. When replacing tires, opt for reputable brands—don’t compromise safety for a lower price. Safe driving comes first.
Was this review help?
8
3
Share
Expand All
EmiliaRose
09/25/25 7:02am
The Emgrand I drove before was a used car gifted by a friend, originally equipped with Maxxis tires. After driving for over a year, I switched to Linglong. The factory-installed tires on the Emgrand are not fixed, and each owner might encounter different brands. I recommend checking the tire sidewall to see the brand logo, such as 'Linglong' or 'Kumho'. The tire replacement cycle is approximately 40,000 kilometers. Choosing a brand depends on personal driving habits. If you frequently drive in urban areas, Linglong is sufficient; if you take more long-distance trips, Maxxis offers better anti-slip performance. Also, remember to monitor tire pressure, as maintaining it within the normal range can extend tire life—don't wait until a blowout to regret it.
Was this review help?
9
4
Share
Expand All
LeAndrew
11/09/25 2:21am
With decades of car repair experience, the common tire brands for Emgrand are Linglong and Kumho. The base models often use Linglong, while higher trims may come with Maxxis. The tire brand isn't the key factor; what matters is checking wear and tire pressure. Emgrand's tires are durable enough for 50,000 kilometers without issues. When replacing, choosing a comparable brand is more cost-effective—don't blindly pursue premium options. Tire issues affect fuel consumption and safety, so it's advisable to have a technician inspect them during regular maintenance.
Was this review help?
16
1
Share
Expand All
More Forum Discussions

What causes the steering wheel noise in Audi A4L?

Audi A4L steering wheel noise can have multiple causes, which need to be diagnosed based on the actual situation and sound type. Below are detailed explanations: Friction between plastic components: Especially in new cars, the steering wheel consists of various plastic parts. If the gaps between these parts are too small, friction may occur when turning the wheel. This usually resolves after a break-in period. If the noise persists, consider reassembling the steering wheel. Friction between steering column and floor mat: Oversized floor mats may directly contact the steering column, causing friction during rotation. Adjusting or replacing the floor mat can solve this issue. Clock spring failure in steering wheel: If the steering wheel has been disassembled, the clock spring (airbag spiral cable) might be broken or its connector unplugged. Replacement or reconnection is needed. Aging of tie rod end ball joint: Replace the tie rod end ball joint, but a wheel alignment is required after replacement. Steering gear failure: If there's particularly alarming noise from the steering wheel, it might be caused by excessive gear clearance in the steering gear. In this case, the steering gear needs replacement.
4
2
Share

Where to Place the Jack on Baojun 510?

Baojun 510's jack should be placed at the support points near the wheel edges on both sides of the vehicle chassis, which are designed for jack contact. The lifting part of the jack must be positioned on the chassis support points. Otherwise, it will be difficult to secure the vehicle, and it may cause damage to the jack or even the chassis. After lifting the vehicle, do not rush to remove the wheel hub screws; taking safety measures is the most important step. A jack is a lightweight lifting device that uses a rigid lifting component as the working mechanism to lift heavy objects within a small range through a top support or bottom claw. It is mainly used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. Jacks have a wide range of applications, not only for cars but also for many industrial equipment that require such compact lifting devices. A common scenario for car jacks is tire replacement. Currently, mechanical and hydraulic jacks are widely used. The former is lightweight and portable, but due to its small size, its lifting capacity and stability are slightly weaker.
13
2
Share

What type of oil should be used for the eighth-generation Civic?

The 1.8L eighth-generation Civic should use semi-synthetic or higher-grade oil with the manufacturer-recommended viscosity of 5W-30. For the 1.5T engine, the manufacturer requires semi-synthetic or higher-grade oil with 0W-20/5W-30 viscosity. Method for changing the oil: Loosen the nut at the bottom of the transmission oil pan to allow the old transmission oil to drain naturally by gravity. Connect the transmission to a circulation machine via pipeline interfaces, and the new transmission oil will push out the old oil under pressure. Methods to determine if the oil needs to be changed: Pull out the oil dipstick and smell it closely. If there is a strong sour or foul odor, it indicates the oil has deteriorated and should be changed. Rub the extracted old oil repeatedly between your thumb and forefinger. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed. Hold the oil dipstick at a 45-degree angle under light and observe the oil droplets. If the droplets are clear without visible wear particles, the oil is in good condition. If there are many wear particles, the oil should be changed.
6
5
Share

Where to Connect the Negative Terminal for Jump-Starting a BMW 3 Series?

For the BMW 3 Series, the negative terminal is located behind the right front headlight. There is a metal post behind the headlight, which serves as the negative terminal for jump-starting. The positive terminal is near the right front suspension strut tower, covered by a red cap. Removing this cap reveals the positive terminal post. When replacing the car battery, always disconnect the negative terminal first, followed by the positive. To power off the vehicle, simply disconnect the negative terminal. When installing the battery, connect the positive terminal first, then the negative. For jump-starting a dead battery, first connect both vehicles' positive terminals, then the negative terminals. After starting the vehicle, disconnect the negative terminals first, followed by the positive. If the rescue vehicle's positive and negative terminals are connected first, the clamps on the ground may become tangled, leading to accidental contact between positive and negative clamps, causing a battery short circuit with severe consequences. If the jumper cables are the same color and the terminals cannot be distinguished, connecting positive to negative and negative to positive could result in a dangerous series short circuit between the two batteries. Exercise extreme caution during the operation. The car battery's negative terminal is connected to the chassis ground, meaning the car body acts as the negative terminal. After connecting both vehicles' negative terminals, connect the rescue vehicle's positive terminal first, then the dead vehicle's positive terminal. If the clamp accidentally touches a metal part of the car body, it would effectively connect both the rescue vehicle's positive and negative terminals to the dead vehicle's negative terminal, causing a short circuit in the rescue vehicle's battery.
13
5
Share

What are the differences between the second and third generation EA888 engines?

The differences between the second and third generation EA888 engines lie in the engine oil filler port: the oil filler port of the second-generation engine is located in the middle left position; the oil filler port of the third-generation engine is positioned at the rear left, behind the engine cover, and the engine cover of the third-generation engine is entirely black. An engine is a machine that converts other forms of energy into mechanical energy. Engines can refer to both the power-generating device and the entire machine including the power unit. Types of engines include internal combustion engines (gasoline engines), external combustion engines (Stirling engines, steam engines), gas turbines, and electric motors.
4
2
Share

When to Use Manual Mode in a Semi-Automatic Transmission?

Semi-automatic transmissions should be switched to manual mode in the following situations: 1. In shopping mall or underground parking garages, where the ramps are usually quite steep. If left in automatic mode, the transmission will upshift automatically, causing excessive wear. Switching to manual mode can prevent rolling back and provide more stable driving. 2. On mountain roads, manual mode helps effectively control vehicle speed to prevent accidents and avoids transmission overheating caused by frequent gear changes. The manual mode in semi-automatic transmissions differs from traditional manual transmissions. It typically features '+' and '-' signs, where '+' means upshift and '-' means downshift - simply push the lever up or down accordingly.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.