What brand of tires does the Audi A4 use?

Why is the Baojun 360 air conditioner not cooling?

The reasons why the Baojun 360 air conditioner is not cooling are as follows: 1. Refrigerant leakage: The refrigerant in the air conditioning system has completely leaked, resulting in no refrigerant, so the air conditioner does not cool. 2. Internal damage to the air conditioning pump: This prevents the cooling effect from starting. Generally, a damaged air conditioning pump will produce abnormal noises. 3. The condenser fins are too dirty: This causes the pressure and temperature in the air conditioning system to be too high, and the air conditioning pump stops working, so the air conditioner does not cool. Relevant information about car air conditioners is as follows: 1. Car air conditioner: It refers to the air conditioning device installed in the car, which can cool, heat, ventilate, and purify the air in the compartment, providing a comfortable riding environment for passengers, reducing the driver's fatigue, and improving driving safety. The air conditioning device has become one of the indicators to measure whether a car is fully functional. 2. Structure: It generally includes a cooling device, a heating device, and a ventilation device. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation.

8

5

Share

Is it okay to park in P gear without engaging the handbrake?

P gear parking still requires engaging the handbrake, otherwise it may cause damage to the transmission. When parking on a flat road, there is not much difference whether you engage the handbrake first or shift to P gear first. However, if parking on a slope, it is best to engage the handbrake first and then shift into P gear to reduce the burden on the car's transmission gears. Below is an introduction to the P gear: 1. P gear is the most common gear in automatic transmission models, usually located at the front position of the gearshift console, in front of the R gear. Its purpose is to lock the axle when the car is stationary on a slope. 2. The direct function of shifting into P gear is parking. When temporarily parking on a level road, shifting into P gear puts the car's transmission in neutral operation, completely interrupting the power transmission between the engine and the output shaft. The driver does not need to turn off the running engine during short waits. Additionally, the P gear has a wheel lock device, so even for long-term parking, the driver does not need to engage the handbrake.

6

3

Share

Can Brake Pads Be Replaced by Yourself?

Brake pads can be replaced by yourself, but it requires some time and effort. When you notice that the brake pads have become thinner, the brakes produce unusual noises, the brake pedal feels lighter, or braking becomes less effective, it's time to replace the brake pads. When replacing brake pads, those on the same axle should be replaced together to ensure even braking force on both sides. Below are the steps for replacing brake pads yourself: 1. To replace the brake pads, you need to lift the car and remove the tire; 2. Remove the caliper bolts, open the brake caliper, and take out the old brake pads; 3. Push the brake piston back in, then install the new brake pads; 4. Reinstall the brake caliper, tighten the caliper bolts to the specified torque without over-tightening, then reinstall the tire; 5. After replacing the brake pads, press the brake pedal a few times to eliminate the gap between the brake pads and the brake disc, allowing the brake piston to reset. Then, check if the brake fluid pump is functioning properly. Once confirmed, the brake pad replacement is complete.

13

0

Share

What is the speed for straight-line driving in Subject 3?

Generally, the speed should be within 30km/h on the road, and second gear is appropriate. Below are some tips for straight-line driving in Subject 3: 1. Three-point alignment: Find a suitable reference object as a visual guide, such as the lane divider line in the middle of the road, curbs, railings, trees, etc. Align any prominent part of the vehicle with the reference object, and make timely adjustments if deviation occurs. 2. Control the speed: Straight-line driving also has speed requirements, and you must reach the corresponding speed to pass. If there is a vehicle ahead, maintain a safe distance and slow down if the distance is too close; if the vehicle ahead speeds up and the distance becomes too large, actively follow up when the road conditions are good. 3. Keep the steering wheel steady: When holding the steering wheel, the left hand should mainly control it, while the right hand gently rests on it for easy gear shifting. Regardless of the speed, always make minor adjustments to the direction, with small movements, turning as much as needed and returning accordingly. Note that keeping the steering wheel still does not necessarily mean maintaining straight-line driving; instead, the vehicle should maintain an equal distance from the lane divider lines on both sides of the road.

7

0

Share

Can the Audi A4 Outrun the S3?

The Audi A4 cannot outrun the S3. The reasons are as follows: 1. Higher power output of the S3: The domestic S3 boasts nearly 300 horsepower; in contrast, the Audi A4's low-power version has only 180 horsepower, while the high-power version reaches just 220 horsepower. 2. Drivetrain: The S3 features excellent traction and a full-time all-wheel-drive system. Details about the Audi A4 and S3 are as follows: 1. Audi A4: It is sold in three displacement variants: 1.8T, 2.4, and 3.0. The 1.8T comes in four models: manual base, automatic base, comfort, and technology-leading. The 2.4 displacement offers three models: comfort, comfort sport, and comfort luxury. The 3.0 displacement has only one model, equipped with the quattro full-time all-wheel-drive system. 2. S3: It is powered by a high-performance 2.0TFSI engine, delivering a maximum power output of 300Ps and a peak torque of 380N·m. The transmission system is paired with a 6-speed S-tronic dual-clutch gearbox, achieving a 0-100km/h acceleration time of just 4.87 seconds.

17

3

Share

Where to Clean the Car Air Conditioning?

Car air conditioning should have the air conditioning filter and air conditioning ducts cleaned. Below are the specific details: 1. Air Conditioning Filter Cleaning/Replacement: Under normal circumstances, an original air conditioning filter has a service life of one year or 30,000 kilometers. Regularly cleaning the air conditioning filter can ensure fresh air inside the car and extend the filter's service life. If the filter is not very dirty, you can use a blower to clean it from the inside out. Cleaning Tip: The car air conditioning filter must never be washed with water; only use tools like an air gun or blower. 2. Air Conditioning Duct Cleaning: Cleaning the air conditioning ducts requires purchasing an air conditioning cleaner. Before cleaning, shake the cleaner well and attach the soft tube from the packaging. Then, set the air conditioning to maximum fan speed and switch to external circulation mode. However, do not turn on the air conditioning compressor (keep the A/C button off). Aim the nozzle of the well-shaken cleaner at the air conditioning filter's position and spray. The suction inside will draw the cleaner in, thereby cleaning the air conditioning ducts. It is particularly important to note that the soft tube on the cleaner should not be too close to the blower to avoid being sucked in.

14

1

Share

What brand of tires does the Audi A4 use?

Why is the Baojun 360 air conditioner not cooling?

Is it okay to park in P gear without engaging the handbrake?

Can Brake Pads Be Replaced by Yourself?

What is the speed for straight-line driving in Subject 3?

Can the Audi A4 Outrun the S3?

Where to Clean the Car Air Conditioning?

How to Fix a Crooked Rearview Camera Display?

Will Using Shampoo to Wash a Car Damage the Paint?

What Causes a Hard Clutch Pedal in Small Cars?

What are the reasons for the shaking during cold start of BMW 5 Series?