What brand of tires does the Arrizo 5 use?

1 Answers
SanElisa
07/30/25 1:12am
The Arrizo 5 uses Giti brand tires, with models including 205/50/R17, 195/65R15, and 205/55R16. These tires are primarily designed for comfort. Giti offers a comprehensive range of high-quality tires catering to various vehicle types such as sedans, SUVs, off-road vehicles, racing cars, light trucks, light buses, trucks, buses, construction machinery, and agricultural machinery. Taking the 2020 Sport Edition Arrizo 5 as an example, it is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 230Nm, paired with a 5-speed manual transmission.
Was this review help?
5
5
Share
More Forum Discussions

Is Gear Oil the Same as Engine Oil?

Gear oil is not engine oil. It primarily refers to the lubricating oil used in transmissions and rear axles. The functions of gear oil include: 1. It is used in various gear transmission devices to prevent gear surface wear, scuffing, and sintering, thereby extending their service life and improving power transmission efficiency; 2. Gear oil should have excellent anti-wear and load-bearing properties, as well as appropriate viscosity; 3. It should possess good thermal oxidation stability, anti-foaming properties, water separation performance, and rust prevention. The hazards of not changing gear oil for a long time: 1. Gear oil working under high-speed and high-temperature conditions for extended periods can deteriorate and volatilize, exacerbating the wear of mechanical components and, in severe cases, damaging internal transmission parts; 2. If gear oil is not replaced for a long time, the vehicle may experience weak starts when cold.
15
3
Share

Steps for Replacing a Car Headlight Cover

Steps for replacing a car headlight cover: 1. The headlight assembly is secured with clips or screws. Remove the clips or unscrew the fasteners to detach the headlight, taking care to protect the wiring harness on the headlight during removal. 2. Use a heat gun to warm the area around the cover to soften the adhesive, then gently pry off the cover. If a heat gun is unavailable, a high-power hair dryer or immersion in hot water can serve as alternatives. 3. After removing the old cover, clean the adhesive residue from the groove, apply new sealant, and press the new cover firmly into place. 4. Once the sealant has dried, reinstall the headlight assembly. It is crucial to replace a cracked headlight cover promptly. Failure to do so can compromise the headlight's seal, leading to internal condensation that impairs lighting performance. In rainy conditions, water ingress may even cause electrical short circuits.
10
3
Share

How to Activate the Cruise Control in Haval Big Dog?

Press the control switch to activate the cruise control standby mode. After accelerating to the desired speed, push the control lever downward to set the cruise speed. The cruise control icon will be displayed on the instrument panel to indicate the standby status. Pressing the brake pedal will immediately deactivate this function. Cruise control automatically maintains the vehicle speed as set by the driver without the need to press the accelerator pedal.
10
5
Share

How to Check the Remaining Fuel in a Volkswagen Bora?

The pointer type indicates the amount of fuel through the position of the pointer. The fuel gauge is marked with two letters, E and F. F stands for full, and E stands for empty. The digital fuel gauge shows the remaining fuel through the number of illuminated bars. More illuminated bars indicate sufficient fuel, while fewer bars indicate low fuel levels.
16
3
Share

Does a Deformed Trunk Count as a Major Accident Vehicle?

A deformed trunk does not count as a major accident vehicle. The definition of a major accident vehicle includes the following conditions: 1. Vehicles that have been impacted, causing damage to the engine compartment and the driver's cabin; 2. Vehicles with damage to the rear fender exceeding one-third of its area; 3. Vehicles with welded, cut, reshaped, or deformed longitudinal beams; 4. Vehicles with welded, cut, reshaped, or deformed shock absorber mounts; 5. Vehicles with welded, cut, reshaped, or deformed A, B, or C pillars; 6. Vehicles where the airbags have deployed due to impact; 7. Vehicles with severe welding, cutting, reshaping, or deformation in non-removable parts; 8. Vehicles where the body has been submerged in water exceeding half of its height or where water has entered the driver's cabin; 9. Vehicles where the body has been burned over an area of more than 0.5 square meters and still pose safety hazards after repair.
9
5
Share

How to Adjust the Seat Belt Height on Volkswagen Lavida?

First, locate the seat belt adjustment button on the left side of the vehicle. Then, press the button downward with your finger to adjust the height of the seat belt. To lower the seat belt position, move it downward. To raise the seat belt position, push it upward. Compare the highest and lowest points of the seat belt anchor for adjustment. For shorter drivers, it is advisable to lower the height appropriately.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.