What brand of tire is EVERSHINE?

How many items are there in C2 Subject 2?

The C2 driver's license Subject 2 test consists of 4 items: reversing into a garage, parallel parking, curve driving, and right-angle turning. Some regions may also include the high-speed card retrieval item. Compared to the C1 manual transmission, the hill start item is omitted. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), starting from June 1, 2021, the hill start and stop item is no longer assessed for C2 and C5 Subject 2 tests. Reversing into a garage is one of the more challenging items in the Subject 2 test, so many test centers place it as the first item. The key points for reversing into a garage are: the steering wheel's full-lock point, the 30-centimeter correction point, and the stopping point inside the garage. It is mandatory to follow the prescribed route and sequence. The vehicle must be reversed into the garage without crossing the lines. Parallel parking focuses on aligning the front line of the garage with the rear wheel, the appearance of the rear corner in the mirror, and the distance between the wheel and the left dotted line. There is no need to straighten the wheels after parking, and don't forget to use the turn signal when exiting. After parking, the vehicle body must not cross the lines, and the tires must not touch or press the lane boundary lines during movement. Curve driving, commonly known as the S-curve, can be completed by many students with good car sense just by feeling, indicating that the S-curve is not very difficult. However, some students may misjudge the line positions during the actual test, leading to immediate failure by crossing the lines. The key to the S-curve is observing the position of the car hood's marker points relative to the boundary lines. The wheels must not press the road edge lines. Right-angle turning is actually less difficult and can be seen as a simplified version of the exiting part in the reversing into a garage item. The method for finding the point is the same as for exiting, based on the relationship between the car hood's horizontal line and the front line (just touching the line or delaying). Be careful not to let the wheels press the road edge lines. Generally, the required training hours for C1 Subject 2 are 16 hours, while for C2 Subject 2, it's 14 hours. Completing the required hours is a basic requirement for taking the Subject 2 test. Training hours can only be increased, not decreased, and additional test items require corresponding additional hours. Each training hour is 60 minutes, with effective teaching time not less than 45 minutes. If you fail Subject 2, you can retake it once. If you fail the retake, the test is terminated, and the applicant must reschedule the test after ten days. If you fail to pass after five consecutive test appointments (including retakes, totaling 10 attempts), all previously passed subject scores will be voided, and you will have to start over from Subject 1.

2

5

Share

What is the valve clearance for a motorcycle?

Motorcycle intake and exhaust valve clearance is approximately 0.05 millimeters. During engine operation, the valves expand due to temperature increase. If there is no clearance or insufficient clearance between the valves and their transmission components when cold, thermal expansion during operation will cause incomplete valve closure. This leads to air leakage during the compression and power strokes, reducing engine power and potentially causing difficulty starting. Below are additional details about motorcycle valve clearance: 1. Standard valve clearance varies among different motorcycle models - intake and exhaust valve clearances may be equal or different. 2. Valve clearance is set to ensure proper operation of the internal combustion engine's valve train. 3. As the valve train operates at high speeds and temperatures, components like valve lifters and stems expand when heated, which could automatically open valves and cause incomplete closure with valve seats, resulting in air leakage.

7

2

Share

What are the standards for the Motorcycle Subject 3 test?

Subject 3 test evaluation is mainly based on comprehensive assessment. The full score for Subject 3 is 100, with 80 being the passing mark. The content of Subject 3 test is the road test, which primarily examines starting, driving straight, changing lanes, passing intersections, pulling over, and making U-turns, among other items. Below is additional information on the main examination content for Subjects 1, 2, and 3: 1. Subject 1 test content includes: road usage, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driving licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. 2. Subject 2 test content includes: pole test for three-wheeled vehicles, regular three-wheeled motorcycles, regular two-wheeled motorcycles, and light motorcycles; stopping and starting on a slope; and passing a single-plank bridge. 3. Subject 3 safe and civilized driving knowledge test content includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.

18

1

Share

What to Do When Car Cleaning Putty Becomes Thin?

You can leave it for a while to let the moisture evaporate, then use a hairdryer to dry it. Soak it in gasoline and rub it off.

5

1

Share

What does 360-degree panoramic imaging for sedans mean?

360-degree panoramic parking imaging for sedans is a system that allows drivers to view a seamless, ultra-wide-angle, real-time stitched image of the car's surroundings on the vehicle's display screen. It helps drivers understand blind spots around the vehicle, enabling more intuitive and safer parking assistance. Also known as the panoramic parking imaging system or 360-degree parking assist system, it is referred to in some regions as the all-around view system, panoramic view system, or 360-degree vehicle visibility system. This system represents an upgraded version of traditional rearview parking cameras and is considered a true panoramic parking imaging solution.

7

0

Share

Can You Drive Away a Used Car on the Same Day of Purchase?

If the used car has complete documentation and is in good condition, and both parties have signed the sales contract and payment has been made, it is certainly possible to drive away the car on the same day. However, both the buyer and seller should agree on the transfer procedures in advance. The car can be driven away once the transfer procedures are completed. Normally, the transfer process takes about two to three hours, and it can be even faster if the vehicle management office is nearby. Below are additional considerations for personal used car transfers: 1. Ensure the property certificate is legal: Pay special attention to the embossed number, engine number, and registration date on the property certificate. 2. Check for any traffic violation records: Before transferring ownership, verify if the vehicle has any outstanding traffic violations and ensure it is within the validity period of the compulsory traffic insurance. Only vehicles with no violations and valid insurance can proceed with the transfer. 3. Verify the vehicle purchase tax payment receipt: Always check the original tax receipt of the car. Some cars may not have paid the purchase tax, and after the transfer, these unpaid or tax-exempt vehicles may be required to pay the tax, which can be a significant expense. Therefore, it is crucial to determine who will cover this cost. 4. Follow standardized procedures: If both parties are unfamiliar with the used car sales and transfer process, it can lead to delays and future issues. After agreeing on the price, it is advisable to engage a reputable agency to handle the formalities to avoid unnecessary complications. 5. Do not forget a written contract: While used car purchases through dealerships usually involve formal sales contracts, it is also best for private transactions to have a written agreement signed by both parties as proof. 6. Agree on intermediary costs in advance: There may be transfer fees or potential refunds during the transaction. Both parties should agree beforehand on who will pay the transfer and inspection fees. It is best for both parties to be present when canceling insurance and completing the transfer to avoid future disputes. 7. Review documentation carefully to avoid issues: Buyers should thoroughly check all relevant documents and insurance proofs to avoid purchasing unregistered or problematic vehicles and prevent fraud. 8. Be cautious when buying from another location: Many private transactions involve online listings, so extra care is needed when purchasing from another region. On one hand, a deposit is usually required before the transfer and payment. Additionally, vehicle inspection and registration may vary by location, so buying locally is often more convenient.

14

5

Share

What brand of tire is EVERSHINE?

How many items are there in C2 Subject 2?

What is the valve clearance for a motorcycle?

What are the standards for the Motorcycle Subject 3 test?

What to Do When Car Cleaning Putty Becomes Thin?

What does 360-degree panoramic imaging for sedans mean?

Can You Drive Away a Used Car on the Same Day of Purchase?

What to Do After a B License Receives 12 Demerit Points?

What is the difference between red CVT fluid and green CVT fluid?

What brand is Batman?

What to do if the deposit for a used car purchase is not refunded?