What brand of spark plugs does the Roewe 350 come with from the factory?

1 Answers
VanJace
07/30/25 6:15am
The Roewe 350 comes with NGK double platinum PFR6Y spark plugs from the factory. The replacement cycle for this type of spark plug is 40,000 kilometers. Spark plugs are a crucial component of a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap and produce a spark, thereby igniting the combustible mixture in the cylinder. If a spark plug is damaged, it can directly cause issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as blistering at the top, damage, or melting and erosion of the electrodes, indicates that the spark plug is destroyed and should be replaced. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the order of the ignition sequence and secure the cover.
Was this review help?
10
5
Share
More Forum Discussions

Which Vehicles Are Suitable for Mobil Oil?

Mobil oil is generally suitable for most vehicles, but it is not recommended for large-displacement turbocharged cars. Mobil 1 is ideal for high-end vehicles, Mobil Super 2000 is suitable for mid-range cars, Mobil 1000 fits cars priced around 100,000 yuan, Mobil Delvac is designed for low-end vehicles, and Mobil Delvac Black is tailored for large trucks and buses. Below is an introduction to oil classifications: 1. Mineral Oil: Mineral oil is extracted from natural minerals. 2. Synthetic Oil: Synthetic oil is artificially formulated through chemical processes. 3. Semi-Synthetic Oil: Semi-synthetic oil is a blend of synthetic and mineral oils.
16
5
Share

Where is the trunk escape switch located?

Open the trunk, and you will find a small black box on the upper part of the trunk lid. Inside this box is the trunk escape device, also known as the trunk escape button. As the frequency of traffic accidents increases, many manufacturers have designed this button for safety purposes. There are several types of escape devices: 1. Pull-string or pull-ring escape device: Usually, there is a pull-string or pull-ring on the trunk lid, and some even use self-luminous materials, making it easy for the owner to locate in the very dark environment of the trunk. There is no difficulty in operation; just pull it outward with force to open the trunk. 2. Cover-type escape device: There is usually a cover plate that needs to be pried open during use, and then the lock core can be moved with a finger to pop open the trunk. 3. Hidden escape device: The opening device is usually hidden in a small hole and requires auxiliary tools like a key to operate.
14
4
Share

What Causes Knocking Sounds Under the Chassis After the Car Shuts Off?

Reasons for abnormal noises under the chassis after the car shuts off: 1. Cooling sounds from the catalytic converter: The normal operating temperature of the catalytic converter is 400-800°C. After shutdown, its operation gradually stops, and the temperature decreases, causing thermal expansion and contraction of internal metal components, resulting in abnormal noises. 2. Cooling sounds from the exhaust pipe: During cold idling, the exhaust pipe can reach temperatures above 200°C. Under high load or when unburned fuel ignites in the exhaust pipe, temperatures can rise even higher, leading to thermal expansion and contraction noises, often originating from the front end or flexible joint of the exhaust pipe. 3. Turbocharger cooling sounds: Normally, exhaust gases can reach 600-700°C, accelerating turbo rotation and friction-generated heat. After shutdown, thermal expansion and contraction become pronounced, causing abnormal noises.
5
3
Share

What are the three major components of the Tank 300?

Tank 300's three major components are the chassis, powertrain, and four-wheel drive system. Below is a detailed introduction about the Tank 300: 1. Overview: The Tank 300 is the first "intelligent luxury off-road SUV" under the WEY brand, built on Great Wall Motors' intelligent professional off-road platform. It combines off-road capability with luxury and comfort, creating a new category in the off-road SUV market. The vehicle dimensions are 4760/1930/1903mm. 2. Other specifications: Fuel consumption is 9.3L/100km. The fuel tank capacity is 80L. The standard seating capacity is 5. Acceleration time is 9.5 seconds. The maximum gradient is 70%. The approach angle is 33°. The departure angle is 34°. The minimum ground clearance is 224mm. The wading depth is 700mm.
18
2
Share

What's the matter with the abnormal display of the outdoor temperature in Mercedes-Benz?

If the outdoor temperature display of a Mercedes-Benz is abnormal, it is necessary to check the wiring of the outdoor temperature sensor. The outdoor temperature sensor is located under the left front bumper. Try unplugging and replugging it to see if it recovers. If the wiring is fine, then the temperature sensor may be faulty. Below is an extended introduction: 1. Introduction to the Mercedes-Benz brand: A German automobile brand, one of the premium car brands, renowned for its perfect technical level, high-quality standards, innovative capabilities, and a series of classic coupe styles. 2. Configuration of the Mercedes-Benz S-Class: The steering wheel is covered with Nappa leather, and the center console uses larger wood trim to further enhance the luxury feel of the vehicle. The new S-Class is the first to feature an active body control system with crosswind stabilization technology, which can effectively improve the adverse effects of crosswinds on the driving stability of the car.
11
4
Share

What are the differences between coating and car wrap?

The differences between coating and car wrap are as follows: 1. Different materials: Coating is made of resin materials; while invisible car wrap is made of polyurethane film. 2. Different application methods: Coating is evenly applied to the car paint; invisible car wrap is applied by cleaning the car surface and then spraying water before applying the film. 3. Different duration of effectiveness: Coating has a short duration, usually three to six months; invisible car wrap comes with a warranty of five to ten years. 4. Different prices: Coating has low cost and is cheaper; invisible car wrap uses high-tech materials and is correspondingly more expensive. 5. Different functions: Coating has good adhesion and protects the car for a short period; invisible car wrap has self-healing properties, where minor scratches can recover under high temperature or hot water, and it can also enhance the brightness of the car paint.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.