···
Log in / Register

What brand of rain guards does the CRV use?

4 Answers
LoganRose
09/06/25 4:09am
The CRV uses Misuba brand rain guards. Below are detailed specifications about the CRV: 1. Powertrain: The CRV is equipped with recalibrated 2.0L and 2.4L engines. The 2.4L engine delivers robust power with quick acceleration, making overtaking effortless; the 2.0L engine offers weaker performance with slower initial acceleration. 2. Safety Features: The CRV comes with SRS dual airbags, door beams, front and rear 3-point ELR seat belts, seat belt reminders, and a seat safety system featuring pretensioners and load limiters. 3. Body Dimensions: The CRV measures 4630mm in length, 1855mm in width, and 1720mm in height.
Was this review help?
9
0
Share
AubreyLynn
09/18/25 4:06am
The original wiper blades that come with the Honda CR-V are typically Honda's OEM brand or customized products from suppliers like Bosch. However, in daily use, I've noticed many people prefer replacing them with third-party brands for better performance. For example, I've had good results using Bosch AeroTwin wipers on my CR-V—they're designed to reduce noise and chatter, and they last long, usually holding up well for one to two years. When replacing them, it's important to ensure the correct size match. For instance, the front windshield often requires a combination of 26-inch and 18-inch blades, depending on the model year, to avoid installation issues that could obstruct visibility. I frequently share these tips in car owner groups, and selecting wipers based on weather conditions is also crucial. For example, silicone blades are a better choice in rainy regions for a cleaner wipe. There are plenty of brand options, too—Rain-X and 3M offer great value for money, and online shopping makes it convenient, often costing just a few dozen bucks. DIY replacement saves time and money while enhancing driving safety, making rainy-day driving much more reassuring.
Was this review help?
8
2
Share
Expand All
LeElliot
11/01/25 4:33am
When I first bought my CR-V, the factory wipers were decent, but after prolonged use, I wanted to switch to trendier brands like Rain-X, a popular choice known for its rain-repellent coating. On the highway, rainwater just slides right off—super cool. There are actually many brand options available, with BOSCH and 3M being common. I compared prices and found that buying a set during online flagship store sales costs less than 100 yuan, much cheaper than at the dealership. Regarding size, the rear wiper on the CR-V is often overlooked, while the front windshield typically uses 28+16 inches or similar. Always check the manual or measure before replacing. I make it a habit to inspect the wiper rubber for wear every quarter, especially in dry and cold weather when it’s prone to cracking. Replacing them promptly ensures safety. Younger enthusiasts who love mods might opt for stylish designs, but avoid cheap no-name brands—they’re noisy and ineffective. Daily maintenance is simple: just wipe them with a bit of cleaner to prevent grease buildup.
Was this review help?
19
3
Share
Expand All
Miles
12/15/25 4:42am
From a technical perspective on CR-V wiper brands, I've researched performance comparisons among several mainstream options. Bosch leads in noise reduction and wind shear resistance, utilizing graphite coating to reduce friction and extend lifespan, ideal for those prioritizing quiet driving. 3M employs ultra-flexible rubber for superior temperature stability. Original equipment mostly comes from Japanese OEMs, but upgrading to silicone material brands like Valeo offers better durability, with silicone's UV resistance performing well in southern heat. Dimensions depend on vehicle parameters, with classic CR-V front wipers typically using a 580mm+400mm combination. My testing focused on smooth activation and coverage area to ensure blind-spot-free cleaning, which is crucial for nighttime driving safety. Additionally, pay attention to arm head interface compatibility during installation to avoid glass damage from forced bending.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

How long after passing the subject one review can you schedule the exam

After passing the subject one review, you can schedule the exam in 3-10 days, as the review process is relatively fast. Study traffic regulations, apply for a driving school quota through the vehicle management office, and after approval, the student will be notified to take the traffic regulations exam. Subject one exam process: Follow the staff's instructions to receive your driving school file in order at the waiting area; Carry and present your ID card for inspection by the supervising officer; Mobile phones must be turned off upon entering the exam area; No loud talking is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or must be placed in your bag); After the exam, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the exam area; Students who pass the exam will sign under the guidance of the staff at the exam exit before leaving; Students who fail the exam can leave immediately and wait for their driving school to notify them of the retake time.
20
5
Share

How Many Years Until a New Energy Vehicle Converted from Commercial to Non-commercial Use is Scrapped?

According to the mandatory vehicle scrapping standards, for small passenger vehicles converted from commercial (taxi) to non-commercial use with an engine displacement of 1 liter or more, the mandatory scrapping period is 8 years. Vehicle scrapping process: The vehicle owner applying for scrapping and renewal must fill out the "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Scrapping" and affix their seal. The registration acceptance department will issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection department, a "Vehicle Scrapping Notice" will be issued. The vehicle owner can then choose a qualified recycling company to dismantle the vehicle. The recycling company will dismantle the vehicle and take photos after verifying the notice. The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the vehicle inspection department for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed according to regulations after approval.
2
4
Share

How Many Channels of Amplifier Are Needed for 6 Car Speakers?

For 6 car speakers, at least a 6-channel amplifier is required. The front speakers should be connected to one channel, and each 6.5-inch speaker should be connected to a separate channel. Introduction to Amplifiers: An amplifier, commonly referred to as a "power amp," is a fundamental device in an audio system. Function of an Amplifier: The primary function of an amplifier is to amplify the relatively weak signals input from audio sources, generating sufficient current to drive the speakers for sound reproduction. Due to considerations such as power, impedance, distortion, dynamics, and different usage scenarios and control functions, different amplifiers vary in internal signal processing, circuit design, and manufacturing processes. When selecting an amplifier, power matching should be the first consideration before other factors. Key points for power matching include: Power matching between the amplifier and speakers refers to matching the RMS (Root Mean Square) rated power. Peak power and music power are generally not meaningful references. If a speaker has a rated power of 80 watts, the amplifier's rated power should match accordingly. The minimum rated power requirement should be equal to the speaker's rated power. For optimal performance, a ratio of 1:1.25 or higher is recommended. If the speaker's sensitivity is low, the power should be appropriately increased.
8
1
Share

What Causes a Scooter to Stall When Accelerating?

Here are the reasons why a scooter may stall when accelerating: Idle speed too low: If the idle speed is too low, the sudden increase in air intake when accelerating can cause the air-fuel mixture to become too lean to ignite, resulting in stalling. In this case, adjusting the idle speed appropriately may help. If the scooter's idle speed is normal, this cause can almost be ruled out. Choke valve open: If the choke valve is left open after a cold start and not closed once the engine is warm, accelerating can also cause the engine to stall. If the scooter's choke valve is not open, this situation can be ruled out. Carburetor fuel supply issues: Problems with the carburetor's fuel supply, such as a clogged fuel filter or a damaged float chamber switch, can lead to insufficient fuel supply. When accelerating, the fuel level in the carburetor's float chamber drops, but the subsequent fuel supply cannot keep up, causing the engine to stall. This type of issue usually results in a brief increase in RPM before stalling. If the engine stalls immediately upon acceleration, this is likely not the cause. Transmission system: A fault in the clutch at the rear part of the transmission system can cause the clutch to lock up suddenly when RPM increases, leading to a sudden increase in resistance and causing the engine to stall.
1
4
Share

What Type of Gasoline Should Motorcycles Use?

Motorcycles should use the type of gasoline recommended in the official user manual of the vehicle. In addition to checking the appropriate gasoline grade in the user manual, you can also find this information on the fuel tank cap, which is usually labeled. Typically, the gasoline grade can also be determined based on the engine's compression ratio. For engines with a compression ratio between 8.6-9.9, 92-octane gasoline is recommended; for those between 10.0-11.5, 95-octane gasoline is suitable. If the compression ratio is even higher, 98-octane gasoline should be used. However, with the application of new technologies, the gasoline grade can no longer be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower-octane gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number, and the better the anti-knock performance. For example, 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after the current tank is used up. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles designed for low-octane gasoline, using a higher-octane grade will not cause damage, but the increase in octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical effect being poorer performance. For vehicles designed for high-octane gasoline, using a lower-octane grade can cause engine knocking. This happens because the significantly lower octane number reduces the gasoline's ignition point, causing it to ignite prematurely during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it may only increase noise without obvious damage to the engine. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
5
3
Share

What is the process for downgrading and renewing a driver's license?

Procedure: The motor vehicle driver or agent shall bring the required materials to the window of the vehicle management office branch or the driver's license management window of the traffic police detachment (brigade) in each district (county) for processing. If applying for a voluntary downgrade of the permitted driving model and license renewal at a vehicle management office other than the issuing place of the motor vehicle driver's license, the transfer procedures shall be completed according to regulations. Materials required: "Motor Vehicle Driver's License Application Form". Identity proof and copy of the motor vehicle driver. Motor vehicle driver's license. Motor vehicle driver's license photo. If simultaneously applying for renewal upon expiration, submit the "Motor Vehicle Driver's Physical Condition Certificate". Two recent half-length, bareheaded, front-facing white-background color ID photos (submit the digital photo collection receipt if required locally). If applying for a voluntary downgrade of the permitted driving model and license renewal at a vehicle management office other than the issuing place of the motor vehicle driver's license, the transfer procedures shall be completed according to regulations, and the original "Motor Vehicle Driver's Health Condition Declaration Form" shall be submitted. For proxy applications, a power of attorney and the agent's identity proof and copy shall also be submitted. Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks shall have their highest permitted driving model qualification revoked by the vehicle management office under any of the following circumstances, and the motor vehicle driver shall be notified to complete the downgrade and renewal procedures within 30 days: Being involved in a traffic accident causing death and bearing equal or greater responsibility without constituting a crime. Having a record of 12 penalty points in one scoring cycle. Failing to participate in the inspection for three consecutive scoring cycles. If the motor vehicle driver fails to complete the downgrade and renewal procedures within the specified time, the vehicle management office shall announce the revocation of the permitted driving model qualification. After completing the downgrade and renewal procedures, if the motor vehicle driver applies to reinstate the revoked permitted driving model, they must have no record of 12 penalty points in the current and the most recent scoring cycle before application, and no traffic accidents causing death with equal or greater responsibility. Procedure for revoking the highest permitted driving model and completing the downgrade and renewal: After passing the relevant examination, receive the "Motor Vehicle Driver's Illegal Full Score Examination Information Feedback Notice" (for Class A and B licenses, downgrade information shall be noted on the notice). After the suspension period ends, bring the ID card and the "Motor Vehicle Driver's Illegal Full Score Examination Information Feedback Notice" to the traffic police team where the license was suspended to retrieve the driver's license. Bring the following materials to the issuing vehicle management office to complete the downgrade and renewal procedures (if there are no pending traffic violations, the process will be completed within one working day): Original "Motor Vehicle Driver's License Application Form". Original identity proof and copy of the motor vehicle driver. Original motor vehicle driver's license. Two recent half-length, bareheaded, front-facing white-background color ID photos (submit the digital photo collection receipt if required locally). For iOS 15 and above, Traffic Management 12123 (V2.8.1B437), and Android 12 and above, Traffic Management 12123 (V2.8.1B274), the license renewal upon expiration can be processed: After logging into the "Traffic Management 12123" APP, go to [More] - [Business Center] - [Renew Driver's License Upon Expiration] to enter the renewal process. After carefully reading the renewal business instructions, you can click [Read and Agree], confirm the user declaration content, and enter the driver information confirmation page, including name, driver's license number, expiration date, etc. You can choose between self-pickup or mailing. For self-pickup, select a pickup location; for mailing, fill in the delivery address. For those choosing self-pickup, they must go to the designated service location to collect the new driver's license in person.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.