What brand of oil is specifically used for Haval H6?
2 Answers
The dedicated oil brand for Haval H6 is SL-grade 10W-40 oil from France's Total. For later maintenance and oil changes, you can choose brands such as Shell, Mobil, or Total. The oil models recommended in the official Haval H6 manual are 10W-40 and 15W-40. Any oil model that meets these specifications can be used. The viscosity of oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better the oil can maintain its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in Haval H6 is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover filler port, typically filling up to three-quarters of the oil container; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
As a car enthusiast, I believe the key to choosing engine oil for the Haval H6 lies not in the brand but in the specifications. The manufacturer recommends fully synthetic oils with viscosities of 0W-20 or 5W-30. Common brands like Total, Shell, and Mobil all offer compatible versions, and these Great Wall-certified oils protect the engine and reduce wear. In my car enthusiast circle, Total is the most widely used, known for smooth starts and low noise. Regular changes every 6,000 km are crucial, paired with a new filter to prevent sludge buildup and extend engine life. Using the wrong viscosity can lead to increased fuel consumption or starting difficulties, so don’t switch brands arbitrarily—prioritize checking the API certification level on the packaging, such as SN or SP standards, to ensure quality and compatibility, keeping your car running longer.
