What brand of engine oil is used in the new XC90?

1 Answers
KiraRose
07/30/25 8:18am
The new XC90 uses engine oil jointly developed by Castrol and Volvo. Introduction to engine oil: Engine oil, also known as engine lubricant, serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption and buffering for the engine. Precautions for using engine oil: When selecting engine oil, it should be chosen based on the engine's requirements, ensuring compatibility with the engine. Multi-grade oil is recommended due to its advantages in fuel efficiency, longevity, and high performance, providing better protection for the engine. The oil level should be slightly below the mark on the dipstick and not overfilled.
Was this review help?
11
1
Share
More Forum Discussions

How many cylinders does the Mercedes-Benz 1.3t engine have?

Mercedes-Benz's 1.3t engine is a four-cylinder. The domestically produced A-Class and B-Class models from Mercedes-Benz both use this 1.3t engine. This 1.3t engine was jointly developed by Mercedes-Benz and Renault-Nissan, featuring good fuel economy as well as reliability and stability. Relevant details are as follows: 1. The domestically produced Mercedes-Benz A-Class is equipped with 1.3t and 2.0t engines. The domestic A-Class uses a total of three engines: a low-power version 1.3-liter turbocharged engine, a high-power version 1.3-liter turbocharged engine, and a 2.0-liter turbocharged engine. 2. It is paired with a dual-clutch transmission, which offers high transmission efficiency and fast shifting speed. This type of transmission is well-suited for use with small-displacement turbocharged engines.
1
0
Share

What Causes the Sizzling Sound When the Car Blower Operates?

The reasons for the sizzling sound when the car blower operates are: 1. Lack of lubrication in the blower bearing; 2. Presence of foreign objects inside the blower. The solutions to address the sizzling sound when the car blower operates are: 1. Add lubricating oil to the blower bearing; 2. Remove any foreign objects inside the blower. Methods for using and maintaining the car air conditioning system include: 1. Avoid setting the temperature too low; 2. Adjust the direction of the air vents; 3. Do not use it for extended periods; 4. Occasionally operate at higher fan speeds; 5. Turn off the air conditioning when driving at low speeds. The main components of a car air conditioning system are: compressor, condenser, evaporator, receiver-drier, and expansion valve. Benefits of cleaning the car air conditioning system include: 1. Enhanced cooling performance; 2. Improved air quality inside the vehicle; 3. Extended service life of the air conditioning system; 4. Reduced likelihood of air conditioning malfunctions.
2
4
Share

How Many Kilometers Should a Three-Way Catalytic Converter Be Cleaned?

The three-way catalytic converter should be cleaned every 20,000 kilometers. The following situations also require cleaning the three-way catalytic converter: 1. When you notice increased fuel consumption and reduced power, check and clean the three-way catalytic converter as needed. 2. When performing maintenance such as cleaning the fuel injectors, throttle body, and intake tract, it is best to clean the three-way catalytic converter at the same time. 3. Before the annual vehicle inspection, it is advisable to clean the three-way catalytic converter to ensure passing the exhaust emission test smoothly. The effects of a clogged three-way catalytic converter are as follows: 1. The rear oxygen sensor sends a signal, causing the engine's fuel injectors to inject more fuel, and the engine warning signal indicates oxygen sensor poisoning. 2. Accompanied by a slight decrease in power and increased fuel consumption, the vehicle may fail the exhaust emission test during inspection. It can be removed, cleaned, and soaked on a lift.
9
0
Share

How to Reset the Maintenance Light on Zotye SR7?

Zotye SR7 maintenance light reset steps are as follows: 1. Turn off the ignition switch. 2. Press and hold the trip meter "reset" button located at the lower left of the instrument panel. 3. Turn on the ignition switch, at this time the odometer display will start counting down, keep pressing the "reset" button. 4. When the maintenance reminder stops flashing, release the "reset" button. 5. Turn on the ignition switch or start the car again to check if the maintenance light has been reset. The small wrench icon on the instrument panel is the car's maintenance reminder light. When the maintenance light is on, it indicates that the car needs maintenance. Regular maintenance includes body maintenance, interior maintenance, and body refurbishment. 1. Body maintenance mainly involves removing various oxides inside and outside the car body to prevent corrosion. 2. Interior maintenance mainly involves repairing the fuel, lubrication, and other operating systems to ensure the car's operation. 3. Body refurbishment mainly involves repairing scratches, engines, bumpers, leather, and other materials.
8
2
Share

What is the actual fuel consumption of the BYD Song MAX?

The actual fuel consumption of the BYD Song MAX is approximately 8-8.5L/100km. Here are the relevant details: 1. The MIIT comprehensive fuel consumption of the BYD Song MAX is 7.6L/100km, but the actual fuel consumption may vary depending on the driver's habits, road conditions, weather, etc. 2. The BYD Song MAX is an MPV model under BYD Auto, with the following configurations: (1) Central Control: Equipped with a 12.8-inch adaptive rotating floating central control screen. (2) Powertrain: The Song MAX is powered by a 1.5T direct-injection engine, delivering a maximum power of 113kW (154PS) and a peak torque of 240N·m. (3) Transmission: Paired with a 6-speed manual or 6-speed dual-clutch transmission. (4) Chassis: Features a front MacPherson independent suspension and a rear torsion beam non-independent suspension structure.
17
1
Share

What Causes the Abnormal Noise When a Volkswagen Turns?

The abnormal noise when a Volkswagen turns is mainly caused by the following reasons: 1. Excessive gear clearance in the Volkswagen's steering gear. In this case, the steering gear needs to be replaced. 2. The abnormal noise comes from the shock absorber's plane bearing. Applying some grease to the plane bearing can help. If the noise persists after greasing, the shock absorber's plane bearing must be replaced. 3. The abnormal noise is from the Volkswagen's stabilizer bar, caused by loose stabilizer bar bushings. This can be resolved by adding shims. If damaged, the bushings must be replaced.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.