What brand of engine oil is used for the Buick Envision?

2 Answers
LeColeman
07/24/25 4:29am
Buick Envision uses Mobil Super 1000 fully synthetic engine oil. Mobil Super 1000 is more suitable for use in regions with higher summer temperatures. However, while high-viscosity oil provides sufficient protection at high temperatures, its high viscosity also results in higher fuel consumption compared to fully synthetic oils with high viscosity indexes like Mobil 1. The Buick Envision is a new-generation strategic model from General Motors, positioned as a midsize SUV. It measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. The body size is not small, and the interior space is relatively spacious.
Was this review help?
9
3
Share
DelGiselle
08/11/25 12:06am
When it comes to engine oil for the Buick Envision, I've driven this car for several years and found Mobil 1 synthetic 5W-30 to be excellent. It meets the dexos certification standard, which is clearly required in the manual due to the engine's precision design. The throttle response is quick during acceleration, with good oil temperature stability and no startup hesitation in winter. I've tried other dexos-certified brands like Castrol or Valvoline, which also perform well, but Mobil 1 proves more durable for long-distance driving. The key is not to skimp on cheap oils that can easily cause carbon buildup and affect engine lifespan. The Envision takes about 5 liters of oil, with changes recommended every 5,000 km or six months to maintain engine health and prolong the vehicle's life. Regularly checking the dipstick for leaks makes maintenance worry-free.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What is the method for replacing the air conditioning filter in a Cruze?

The method for replacing the air conditioning filter in a Cruze is as follows: 1. Open the glove compartment on the passenger side, and there are limit buckles on both inner sides; remove them by hand. 2. Lower the glove compartment. 3. Inside, there is a black plastic cover plate; remove the buckle by hand and take off the cover plate. 4. You will see the air conditioning filter; pull it out by hand and replace it with a new one. Relevant information is as follows: 1. The Cruze is a compact car with a body size of 4666mm in length, 1807mm in width, and 1460mm in height, with a wheelbase of 2700mm. 2. The Cruze is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150PS, a maximum torque of 240Nm, and a maximum power of 110kW, matched with a 7-speed dual-clutch transmission.
7
2
Share

When to Use High Beam Headlights?

High beam headlights should be used in the following situations: 1. When driving on roads with poor lighting conditions, high beams can be used alternately with low beams. 2. When unfamiliar with the road conditions or needing to read road signs and other markers, high beams can be used but should be quickly switched back to low beams. 3. When overtaking at night, alternate between high and low beams to alert the vehicle ahead. 4. Turn on high beams when entering a tunnel, and switch to low beams in advance when encountering oncoming traffic. 5. When a vehicle passes through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic signal control at night, it should alternate between high and low beams as a signal.
12
2
Share

How to Turn Off the Car Radio?

To turn off the car radio, press and hold the power button. Below are the functions of the radio buttons in the car: 1. Pressing the power or vol button turns it on/off, while rotating it adjusts the volume. 2. The tpk or manu button is used for MP3 track selection and browsing playback tracks. 3. Pressing and holding the ast button automatically stores radio stations. 4. The rpt button is for repeat playback in CD or USB mode. 5. The int button is for browsing playback in CD or USB mode. 6. The rdm button is for random playback in CD or USB mode.
2
1
Share

Is the fuel consumption of the Malibu XL 2.0T high?

The official combined fuel consumption of the Chevrolet Malibu XL 2.0T is 6.7L/100km, which is not considered high. Relevant introduction of the Malibu XL is as follows: 1. The exterior adopts the Chevrolet family design style, with a layered large-mouth front grille that is very dynamic, filled with horizontal chrome trim inside. The slim headlights on both sides are sharp, and the side profile is sleek with a smooth and natural fastback roofline, free of any awkwardness. The rich lines create excellent light and shadow effects, and the upturned ducktail enhances the sporty feel. 2. The Malibu XL has dimensions of 4933*1854*1472mm and a wheelbase of 2829mm. The 2.0T engine delivers a maximum power of 174kW (5000rpm), maximum horsepower of 237Ps, and maximum torque of 350N•m (1500-4000rpm).
12
1
Share

How long can you park temporarily on the roadside?

You can park temporarily on the roadside for 5 minutes, provided that the driver does not leave the vehicle (temporary boarding and alighting is allowed). If the driver leaves the vehicle, it is considered a violation even if the vehicle is not turned off. Below are some roadside parking tips: 1. Always park in designated areas where parking is permitted. Solid blue lines indicate free long-term parking, dashed blue lines and dashed yellow lines indicate temporary parking, and white lines indicate paid parking. 2. Do not exceed 5 minutes when parking temporarily. Electronic surveillance captures illegal parking within 5 minutes, which is not considered a violation, but exceeding 5 minutes is considered illegal parking.
7
1
Share

What causes high idle speed in a hot Santana?

The reason for high idle speed in a hot Santana is due to the idle switch not closing and the idle contacts being disconnected. The solutions are as follows: 1. Check the throttle opening. If the basic idle speed is too high, inspect the vacuum sealing of the system, especially the sealing of the vacuum tube, PCV valve, and related parts of the crankcase. 2. Check the engine load signal. If the idle control valve opening is too large, verify whether the engine load signals are normal, such as the air conditioning signal, battery voltage, and the temperature value of the water temperature sensor. 3. Check the vacuum degree of the intake manifold. During normal engine idle conditions, the vacuum degree of the intake manifold should be 57~71kPa. If the vacuum degree is too low, it will cause abnormal pressure signals in the engine intake system, leading the engine computer to mistakenly assume an increased load and thus raise the idle speed.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.