What brand of engine is used in the Dongfeng Fengguang ix5?

3 Answers
AliviaRose
07/24/25 11:26pm
SFG15TA is the engine model used in the Dongfeng Fengguang ix5, with a maximum horsepower of 150 hp, a maximum power of 110KW, a maximum power speed of 5600rpm, and a peak torque of 220N.m. The Fengguang IX5 engine is produced in China and is independently developed by Dongfeng Fengguang. For the daily maintenance of the Dongfeng Fengguang ix5 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to pass through the bypass valve and bring dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. When the amount is small, it suspends in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
Was this review help?
10
5
Share
Devon
08/10/25 3:23pm
I have conducted extensive research on the Dongfeng Fengguang ix5. It is equipped with a 1.5-liter turbocharged engine independently developed by Dongfeng, a brand produced by Dongfeng itself. The specific model is SFG15T, with technology partially derived from Fiat's platform but primarily relying on local development. I frequently test drive this vehicle, and its power delivery is smooth in urban areas, with good acceleration from a standstill. The average fuel consumption is around 7-8 liters, which is quite fuel-efficient. In terms of engine reliability, there are rarely reports of major issues in daily use, noise control is much better than the older models, and maintenance is straightforward, making it suitable for family use. As an automotive enthusiast, I believe Dongfeng has made significant progress in recent years, and this engine offers high cost-performance, meeting daily needs effectively.
Was this review help?
15
1
Share
Expand All
StGabriella
08/10/25 3:24pm
I've handled many Fengon ix5 cases in the repair shop, where the common engine is the Dongfeng-branded 1.5T turbocharged model. When owners bring their cars in, I often encounter carbon buildup or spark plug wear issues, leading to unstable power. I recommend regular maintenance, such as changing the oil every six months and cleaning the fuel system. The engine is generally durable, and Dongfeng's proprietary technology makes parts easy to find, keeping repair costs low. During inspections, I check the oil condition and sensor data to ensure there are no leaks or malfunctions. For long-term use, this engine performs reliably in city driving, offers strong stability at high speeds, and has well-optimized fuel consumption.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

Why Won't the Car Start Even Though It Has Power?

Car has power but won't start is caused by a malfunction in the vehicle's engine ignition system or fuel supply system. When this situation occurs, it is recommended to immediately go to a professional institution or 4S shop to read the fault code, which can inform the technician of the faulty part and the cause of the fault. The main components of a car engine's ignition system are the ignition coil and spark plugs. Spark plugs are wearable parts that need to be replaced regularly. Spark plugs have electrodes that can release sparks. As the car's mileage increases, the electrode gap of the spark plugs will also become larger. If the electrode gap becomes too large, it will affect the ignition energy of the spark plugs.
4
5
Share

What Causes High Engine RPM?

The reasons for high engine RPM: 1. Intake system malfunction causing sudden throttle opening; 2. Insufficient cylinder pressure, requiring inspection of piston rings and piston wear; 3. Engine oil issues; 4. Air conditioning clutch slippage or damage causing sudden loss of engine load; 5. Transmission computer forced downshifting or internal transmission failure; 6. Insufficient engine power output. Engine RPM directly relates to the number of work cycles per unit time or the effective power output, meaning engine power varies with RPM changes. The operating condition at rated power and rated RPM is called the rated operating condition.
15
5
Share

Where is the engine number located on the Audi TT?

Audi TT engine number is located on the side wall of the cylinder block, where there is a machined platform approximately 5-6 cm long and 1 cm wide, bearing the engine number. Alternatively, some models may have it on the vehicle's identification plate. The engine model is marked by the manufacturer in accordance with relevant regulations or industry practices to indicate engine-related information. The Audi TT is a sports car developed by Audi, with body dimensions of 4178mm in length, 1842mm in width, and 1352mm in height, and a wheelbase of 2468mm. In terms of power, the Audi TT is equipped with Volkswagen Group's 1.8T 20V engine, available in low-pressure and high-pressure versions, with Quattro all-wheel drive as the drivetrain.
5
1
Share

Does a New Car Need a Break-in Period?

New cars do require a break-in period, as every new vehicle has a break-in phase, typically lasting between 1,000 to 3,000 kilometers. Purpose of the break-in period: The break-in period primarily allows various components of the car to fully contact, rub, adapt, and settle. During this phase, the car's parts enhance their ability to adapt to the environment, and initial contact between components helps wear down any rough surfaces or protrusions. Precautions during the break-in period: Avoid full load. The vehicle's load during the break-in period should not exceed 75% of its rated capacity. Maintain smooth starts and avoid sudden acceleration. Since the parts are still in the break-in phase, excessive load or high speeds can intensify impact on components, potentially causing damage rather than smoothing surfaces. Shift gears promptly while driving. Avoid prolonged use of a single gear. Start in low gear and gradually shift to higher gears for progressive driving. Prevent scenarios like low-gear high-speed or high-gear low-speed driving to ensure even wear among gears, shafts, and other transmission components. Choose smooth roads to minimize excessive vibration, impact, or sudden braking. Control your speed carefully, ideally keeping it between 50–80 km/h. Avoid long-distance trips. Extended driving during the break-in period increases continuous engine operation time, accelerating component wear. Do not change the oil prematurely. Follow the manufacturer's recommended schedule for oil changes during the break-in period. Always warm up the engine before driving. The coolant temperature should reach at least 40°C. Warming up ensures proper lubrication, especially for turbocharged models, which require at least one minute of warm-up before driving.
19
1
Share

What is the difference between manual and automatic cars?

Manual and automatic cars differ in the following ways: 1. Gear shifting: Manual cars require the driver to use their foot (press the clutch) when shifting gears; automatic cars allow the driver to shift gears without using their foot. 2. Gear positions: Manual cars have gears ranging from 1 to 5 plus R (reverse); automatic cars have P (park), N (neutral), R (reverse), D (drive), and S (sport) gears. Automatic transmissions do not require gear shifting while driving, whereas manual transmission cars require timely gear shifting to adjust vehicle speed and engine torque changes. A manual transmission, also known as a manual gearbox, requires the driver to manually move the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed variation.
4
1
Share

What is the purpose of a clutch?

Clutch ensures smooth vehicle starting and seamless gear shifting. Located inside the flywheel housing between the engine and transmission, the clutch assembly is secured to the rear plane of the flywheel with screws, with its output shaft serving as the transmission input shaft. During driving, the driver can depress or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine with the transmission, thereby interrupting or transmitting engine power to the gearbox. As a common component in mechanical transmission systems, the clutch allows for instantaneous disconnection or engagement of the drivetrain. Functioning similarly to a switch, it enables/disables power transmission. The clutch mechanism permits temporary separation and progressive engagement between its driving and driven components while allowing relative rotation during power transfer.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.