What brand of engine is used in the Buick Excelle?

1 Answers
MacLilah
07/30/25 6:13am
The engine of the Buick Excelle is produced at the Shanghai General Motors Yantai Dongyue Base, featuring German technology and is a domestically manufactured engine. The Buick Excelle uses the L2B engine model, with a maximum horsepower of 113Ps, a maximum power output of 83KW, a maximum power speed of 6000rpm, and a peak torque of 141N.m. For daily maintenance of the Buick Excelle's engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly replace the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
1
4
Share
More Forum Discussions

What is the reason for no sound in Land Rover CarPlay navigation?

Land Rover CarPlay navigation has no sound due to a malfunction in the vehicle's infotainment system. Here is some relevant information about CarPlay: 1. CarPlay: CarPlay is an in-car system developed by Apple Inc. in the United States, which seamlessly integrates users' iOS devices and iOS experience with the dashboard system. Many car models now support the CarPlay system, enabling hands-free control of multimedia functions through voice commands. 2. Application: The CarPlay system allows users to make phone calls via Siri, play music, set navigation information, and more while driving. The integration of CarPlay undoubtedly enhances operational convenience, reduces the time drivers spend on operations while driving, and allows them to focus more on driving, thereby improving driving safety.
17
2
Share

What are the reasons for severe internal reflection after car window tinting?

Severe internal reflection after car window tinting may be caused by poor-quality film with high reflectivity. Precautions for car window tinting are as follows: 1. Film selection: When choosing window film, in addition to brand and quality, the most important factor is light transmittance. It is advisable to select films with over 85% light transmittance, as traffic regulations require a minimum of 70% light transmittance. Films below this standard will fail vehicle inspections and may affect driving visibility. 2. Post-tinting care: For three days after tinting, do not roll down windows or wash the car, as the adhesive needs time to cure properly. Operating windows during this period may cause the film to peel or form bubbles. For vehicles with sunroofs, avoid opening them for three days, especially during highway driving. Avoid using strong adhesive labels directly on the tinted surface for one month to prevent localized detachment from the glass.
2
4
Share

How Does a Car Vacuum Booster Work?

The working principle of a car vacuum booster is as follows: during braking, when the brake pedal is depressed, the control force from the pedal mechanism pushes the control valve push rod 12 and the control valve plunger 18 forward. After eliminating the gap between the plunger and the rubber reaction disc 7, it continues to push the brake master cylinder push rod 2. The brake fluid in the master cylinder flows into the brake wheel cylinder at a certain pressure, and this force is provided by the brake pedal mechanism. At the same time, under the action of the valve spring 16, the vacuum valve 9 also moves forward until it presses against the valve seat of the diaphragm housing, thereby isolating channels A and B, i.e., separating the front and rear chambers of the servo chamber. Subsequently, the air valve opens away from the vacuum valve, allowing air to pass through the filter ring 11, the felt filter ring 14, the opening of the air valve, and channel B to fill the rear chamber of the servo chamber. As air fills in, a pressure difference occurs on both sides of the servo chamber diaphragm 20, generating a thrust. This thrust pushes the brake master cylinder push rod 2 forward through the diaphragm housing 8 and the rubber reaction disc 7, and this force is provided by the pressure difference. At this point, the force acting on the brake master cylinder push rod is the sum of the pedal force and the thrust from the servo chamber reaction disc, causing the output pressure of the brake master cylinder to multiply. Relevant information about the vacuum booster is as follows: 1. Introduction: The vacuum booster is generally located between the brake pedal and the brake master cylinder. For ease of installation, it is usually integrated with the master cylinder as a single unit, with part of the master cylinder extending into the vacuum booster housing. 2. Basic Structure: The vacuum booster mainly consists of a vacuum servo chamber and a control valve. The vacuum servo chamber is composed of front and rear housings 1 and 19, with a servo chamber diaphragm 20 sandwiched between them, dividing the servo chamber into front and rear chambers.
11
2
Share

What causes the abnormal noise in the Rena electronic power steering wheel?

The reasons for abnormal noise in the Rena electronic power steering wheel include a faulty servo motor in the electric power steering system; excessive or damaged bearing clearance in the steering gear; excessive clearance or wear in the steering rack; and the steering wheel being turned to its limit. Below are the advantages and disadvantages of electronic power steering: 1. Advantages: Low failure rate, maintenance-free; light and effortless steering, easy to control; and generally, electric power steering also includes speed-sensitive weight changes, which provide a better driving feel when reversing at low speeds or driving at high speeds due to the variation in steering wheel weight. 2. Disadvantages: Higher repair costs in case of failure; average quality stability; electric power steering generally isolates road feel, reducing the driver's perception of the vehicle's driving state, which detracts from control and driving pleasure.
20
2
Share

What Tools Are Needed to Replace Brake Pads?

Replacing brake pads requires tools such as wrenches, sockets, piston press pumps, and noise reduction paste. Below is more information about brake pads: 1. Terminology Explanation: Brake pads are also known as brake linings. In a car's braking system, brake pads are the most critical safety components. The effectiveness of all braking depends on the brake pads, making high-quality brake pads the guardian of both the driver and the vehicle. 2. Working Principle: The braking principle is primarily based on friction. By utilizing the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into thermal energy through friction, bringing the car to a stop.
13
1
Share

Where is the driving mode switch for the Hongqi H5?

Pulling the gear lever all the way down engages the S mode, while shifting to the right from the D position activates the manual mode. Below are the detailed specifications of the Hongqi H5: 1. Body Dimensions: The Hongqi H5 is a mid-size sedan under the Hongqi brand, with a length, width, and height of 4945 mm, 1845 mm, and 1470 mm, respectively, and a wheelbase of 2875 mm. 2. Powertrain Configuration: The vehicle is equipped with two engines—a 1.5-liter turbocharged engine and a 1.8-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 169 horsepower and a maximum torque of 258 Nm, featuring direct fuel injection technology and an aluminum cylinder head. It is paired with a 7-speed dual-clutch transmission. The 1.8-liter turbocharged engine produces 197 horsepower and a maximum torque of 320 Nm, also equipped with direct fuel injection and an aluminum cylinder head, mated to a 6-speed automatic transmission (6AT). 3. Suspension Setup: The front suspension of the Hongqi H5 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.