What brand of engine does Maserati use?

1 Answers
Travis
07/29/25 10:12pm
Maserati's entire lineup is equipped with a 4.7-liter V8 naturally aspirated engine. Here is the relevant introduction of the 2021 Maserati Ghibli: 1. The Maserati GT is a grand tourer under the Maserati brand, with body dimensions of 4974mm in length, 1945mm in width, and 1484mm in height, a wheelbase of 2998mm, a fuel tank capacity of 80 liters, and a curb weight of 2020kg. 2. The 2021 Maserati Ghibli features a double-wishbone independent front suspension and a multi-link independent rear suspension. 3. The Maserati GT is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power of 243kW, and a maximum torque of 450Nm, paired with an 8-speed automatic transmission.
Was this review help?
14
5
Share
More Forum Discussions

Is 80 psi acceptable for road bike tire pressure?

No, additional inflation is required. Road bikes typically have a maximum tire pressure of 120 psi, with standard pressures being 100 or 110 psi. High-speed tires can reach up to 160 psi maximum, with standard pressures of 140 or 150 psi. The maximum allowable tire pressure for car tires is marked on the sidewall; it's advisable to maintain pressure 10 psi below this marked value. Further details are as follows: Relationship between total load and tire pressure: The narrower the road bike tire, the greater the total load and the higher the required tire pressure. For every 1kg increase in tire load weight, tire pressure should be increased by 1%. Front/Rear wheel pressure: The maximum and minimum pressure values are indicated on the sidewall of the tire. Heavier vehicle weight requires higher tire pressure, with front wheel pressure generally lower than rear wheels. However, suspension-equipped bicycle tires should maintain slightly higher pressure than non-suspension models.
7
5
Share

What is the impact of a brake switch failure on the throttle?

Brake switch failure can cause the throttle to lose power. Below is an introduction to the handbrake: Introduction: The handbrake is used to stabilize the vehicle after it comes to a stop, preventing accidents caused by rolling on inclined surfaces. Location: Typically, the handbrake is positioned within easy reach of the driver's right hand for convenience, though some models may place the parking brake on the side of the brake pedal. Principle: The parking brake only applies braking force to the rear wheels, using two metal cables to pull the rear brake pads, thereby achieving the braking effect. Normally, when the handbrake lever is pulled to about 70% of its full travel, it should be in the proper braking position. Before testing the handbrake's braking force, it's necessary to locate this point, which can be determined by counting the clicks of the ratchet. The 70% position is the effective working point of the lever.
16
3
Share

Difference Between 91V and 91W Tires

Here are the specific differences between 91V and 91W car tires: 1. Speed rating: V indicates that the maximum speed this tire can withstand is 240 km/h, while W indicates a maximum speed of 270 km/h. 2. Load index: Both 91W and 91V tires can carry a load of 615 kg. Below is extended information about car tire specifications: 1. Specification representation: Tires are important components of vehicles, and they come in various specifications suitable for different car models. Specification markings are usually found on the tire sidewall as a series of alphanumeric characters, representing tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: Based on different maximum speed capacities, tire speed ratings are classified from A to Z, with grade A further divided into eight sub-levels from A1 to A8. The later the letter representing the speed rating appears in the alphabet, the better the tire's performance.
6
4
Share

Why does the exhaust pipe discharge water in winter?

In winter, water discharge from the exhaust pipe occurs because the three-way catalytic converter releases water vapor during operation. As the temperature of the exhaust pipe decreases, this vapor condenses into water droplets that flow out with the exhaust gases from the tailpipe. Below are specific details about the automotive three-way catalytic converter: 1. Water discharge phenomenon: When the car is idling or running at high speed, water droplets or streams often drip from the exhaust outlet at the rear of the exhaust pipe or from the drainage holes beneath the muffler. This indicates good engine combustion conditions and normal operation of the car's three-way catalytic converter. 2. Working principle: The working principle involves the chemical reactions within the three-way catalytic converter, which transform harmful gases such as carbon monoxide in the exhaust into carbon dioxide and water.
1
2
Share

Can I take the exam without glasses if I wore them during the physical examination?

Yes, it doesn't matter as long as you take the exam in person. Here is the relevant information: ID photo: The requirements for the ID photo are a bareheaded (without a hat) front photo, which should normally show the outline of the person's ears and the area equivalent to the Adam's apple for men. The photo size can be one inch or two inches, and the color can be black and white or color. When taking the photo, you should not wear lipstick or other makeup colors that affect your true appearance, including hair dye. Motor vehicle driver exam: The motor vehicle driver exam is divided into the following sections: theoretical exam on road traffic safety laws, regulations, and related knowledge (subject one), field driving skills exam (subject two), road driving skills exam (subject three), and theoretical exam on safe and civilized driving common sense (subject four). The exam content and passing standards are unified nationwide, with corresponding exam items specified according to different types of driving licenses.
7
3
Share

How Many Minutes Does It Take to Warm Up a Car?

It takes about 30 seconds to 1 minute to warm up a car. The method to warm up a car is as follows: 1. Start the vehicle and keep the air conditioning turned off; 2. Let the car idle for about 1 minute to warm up; 3. Drive slowly after the engine runs smoothly; 4. Once the engine coolant temperature gauge rises by 1 to 2 bars, you can drive normally and use the air conditioning. The reasons why a car needs to be warmed up include: 1. After being parked for a long time, the engine oil flows back into the oil pan; 2. Before the engine reaches its operating temperature, the fuel supply system cannot effectively vaporize gasoline completely due to the low temperature; 3. When parked, the gear oil flows to the lower part of the transmission, leaving the upper part without lubrication during a cold start.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.