What brand of car is 'Fuhao'?

Reasons for the Exclamation Mark Light to Illuminate?

The appearance of an exclamation mark on the car dashboard indicates an abnormality or malfunction in the corresponding system. Many indicator lights on the car dashboard feature an exclamation mark, such as the tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, braking system fault light, transmission fault indicator light, and wiper fault indicator light. Below is a detailed explanation of the exclamation mark fault lights: General Faults: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance or components and functions. Common issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. The transmission fluid should be replaced promptly. Braking System Fault: A circle with parentheses and an exclamation mark in the middle. This represents a warning for the braking system, mainly indicating a braking system fault or low brake fluid level. Immediate inspection of the braking system is required to avoid accidents. Tire Pressure Abnormality: A horizontal line with parentheses below and an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which illuminates when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the vehicle dashboard are divided into two different colors: yellow and red: Yellow indicates a fault in the corresponding system that is not very severe. Reduce speed and proceed to the nearest repair point for maintenance to eliminate potential safety hazards in time. Red indicates a very serious problem in the corresponding system. In such cases, do not continue driving. Pull over immediately and seek professional assistance to prevent unpredictable dangers to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit without turning off, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly for inspection and elimination of safety hazards.

3

5

Share

What is the normal tire pressure for the Nissan X-Trail?

The normal tire pressure range for the Nissan X-Trail is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The high-end models of the Nissan X-Trail are equipped with a tire pressure monitoring alarm system, which can be viewed on the dashboard. The tire pressure monitoring system automatically monitors the tire pressure and displays specific values while the vehicle is in motion. For other models, external instruments must be used to check the tire pressure. It is recommended to inspect the tire appearance and pressure before long-distance driving. Generally, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system typically alerts when the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset. After inflating the tires, the system was not reset in time, causing it to display the previous data, which triggers the indicator light. Simply reset the tire pressure monitoring system. Damaged tire pressure sensor. The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.

12

0

Share

Under What Circumstances Can You Make a Left Turn?

Motor vehicles can make a left turn under the following circumstances: When the traffic signal displays a green arrow, it indicates that vehicles are allowed to proceed in the direction the arrow points, and motor vehicles can turn left. At intersections with circular signal lights, left turns are permitted when the light is green, but vehicles must yield to oncoming straight-moving traffic first. If a motor vehicle is in a straight-only lane at an intersection without traffic lights and the road markings do not indicate a left-turn arrow (with only two lanes), straight-moving vehicles can turn left, but the left-turning vehicle must stay close to the center of the intersection. Regulations regarding entering the left-turn waiting zone: When the straight signal is green, vehicles can enter the left-turn waiting zone; when the left-turn signal turns green, vehicles waiting in the zone should proceed through the intersection promptly. If both the straight and left-turn signals are red, vehicles must not enter the left-turn waiting zone in advance and must stop behind the stop line, avoiding the pedestrian crossing in front of the stop line. Otherwise, it will be considered running a red light, punishable by a 6-point deduction and a fine. When the left-turn signal is yellow, vehicles that have not yet entered the waiting zone should stop before the stop line in the left-turn lane. Circumstances where left turns are prohibited: Left turns are not allowed if there are no U-turn signs or markings at the intersection; if the leftmost lane is a straight-only lane; or if the left-turn arrow signal is red while the straight signal is green. According to Article 51, Section 7 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China": At intersections without directional signal lights, turning motor vehicles must yield to straight-moving vehicles and pedestrians first. Right-turning vehicles from the opposite direction must yield to left-turning vehicles.

6

0

Share

How to Drive a Manual-Automatic Transmission Car Better?

Here are some tips for driving a manual-automatic transmission car: 1. When starting, try to keep the gear in P (Park) or N (Neutral), then press the brake and start the car. Starting the car in other gears can cause excessive wear on the transmission. 2. When the vehicle starts, press the brake and shift to D (Drive), then slowly release the clutch. After the vehicle moves a few meters, you can press the accelerator. On smooth roads, you can keep the gear in D and drive forward, but avoid sudden acceleration, as it will increase fuel consumption. 3. When encountering uphill roads, try to shift to the climbing gear, which not only provides strong power output but also prevents the engine from struggling. 4. The manual-automatic transmission is very useful in traffic jams. If you keep the gear in D, the frequent stop-and-go will cause the gear to shift between 2nd, 3rd, and 4th gears, accelerating transmission wear. Therefore, in traffic jams, it's better to use manual shifting. If the speed is around 20 km/h, you can shift to 2nd gear; if it's above 30 km/h, shift to 3rd gear. You can also use the S (Sport) mode to limit gear shifting. 5. When driving downhill in an automatic transmission car, never shift to N (Neutral). Although it may seem fuel-efficient, it actually has the opposite effect, as it stops the oil pump from supplying lubricating oil, causing significant damage to the transmission. 6. When parking a manual-automatic transmission car, it's best to shift to P (Park) before turning off the engine and removing the key. This protects the transmission. Additionally, when parking on uneven roads, pull the handbrake before turning off the engine. Otherwise, the vehicle may move slightly after turning off, causing impact on the transmission gears and damaging the transmission.

13

5

Share

How to Handle a Flat Tire While Driving?

When encountering a flat tire while driving, the correct approach is to stay calm, keep both hands firmly on the steering wheel, maintain control of the vehicle's direction, gradually release the accelerator, and use intermittent braking to bring the car to a slow stop. Automobile tires can be categorized into more than 10 types based on their purpose, including passenger car tires, truck tires, and off-road tires. Structurally, they can be divided into radial tires and conventional bias-ply tires. Tires are circular elastic rubber products mounted on metal rims that support the vehicle body, absorb external shocks, ensure contact with the road surface, and maintain the vehicle's driving performance.

19

4

Share

Why was the Single-Plank Bridge Removed from Subject 2?

Removing the single-plank bridge was due to its inability to effectively assess trainees' skills. Below are the relevant details: 1. Subject 2 Test Content: Reverse parking into a garage; Stopping and starting on a slope; Parallel parking; Curve driving; Right-angle turns. 2. Passing Criteria: The test is scored out of 100, with standards for failure, 20-point deductions, and 10-point deductions. The following criteria must be met to pass: For applicants seeking licenses for large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required; For other license types, a score of 80 or above is required.

12

5

Share

What brand of car is 'Fuhao'?

Reasons for the Exclamation Mark Light to Illuminate?

What is the normal tire pressure for the Nissan X-Trail?

Under What Circumstances Can You Make a Left Turn?

How to Drive a Manual-Automatic Transmission Car Better?

How to Handle a Flat Tire While Driving?

Why was the Single-Plank Bridge Removed from Subject 2?

How to Upgrade from C1 to B2 Driver's License?

Can the original battery of Nissan Sylphy be left unused for a long time?

Does the Peugeot 308 Have a Turbocharger?

What are the symptoms of spark plug aging?