What brand of car has four vertical bars?

2 Answers
MacKing
07/24/25 10:24am
Currently, there is no car with four vertical bars. A car logo with five vertical bars belongs to WM Motor. The WM EX6 is a medium-sized pure electric SUV with body dimensions of 4802 mm in length, 1839 mm in width, and 1710 mm in height, and a wheelbase of 2715 mm. The WM EX6 is a single-motor model, with the motor's maximum power being 60 kW and maximum torque of 315 Nm. In terms of configuration, the WM EX6 is equipped with chassis braking drive mode, airbags, reverse radar, safety controls, external sunroof, wipers, fuel consumption display, etc. WM Motor is a manufacturer specializing in pure electric vehicles. Pure electric vehicles are the trend of future automotive development, and internal combustion engine cars will eventually be replaced by pure electric vehicles.
Was this review help?
2
5
Share
McVincent
08/11/25 5:31am
I've been studying automotive history for quite some years. The Audi logo consists of four interlinked rings, often described as four vertical bars, mainly due to lighting effects. Audi's origins trace back to the 1932 merger of four German companies, with each ring representing a brand, such as Wanderer and Horch, now a luxury car giant. Models like the Audi A4 or Q5 sell well in China, with highly recognizable logos that stand out on the road. To avoid misidentification, it's recommended to look at actual car photos or observe them up close in showrooms. Audi's design is quite classic, blending sporty and elegant elements.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to Quickly Remove Double-Sided Tape from a Car?

Use a hair dryer to heat it up, then slowly peel it off. Apply some household white flower oil on it. If you don't have white flower oil at home, you can use products like essential balm or liniment oil. For larger areas, you can use anhydrous alcohol. Cover the entire marked area with a dry cloth soaked in vinegar.
14
1
Share

What are the reasons why car window glass cannot be raised or lowered?

The reasons why car window glass cannot be raised or lowered are: 1. The window control function is turned off: Cars are equipped with a function to independently control the windows of the passenger seat and the two rear doors. Pressing this function switch will disable the window control; 2. There are foreign objects in the window guide channel: Higher-end models are equipped with an anti-pinch function for the windows. Foreign objects in the guide channel, aging of the guide channel rubber, or excessive dust accumulation can trigger the anti-pinch function, preventing the window from being raised; 3. The window motor is overheated: The raising and lowering of the window glass are controlled by the window motor. Frequent operation of the window can cause the motor to overheat, entering an overheat protection mode. At this time, the window control function will temporarily fail until the motor cools down and returns to normal; 4. Faulty control switch: Older cars with frequent window operation may experience control switch failure. Initially, it may require pressing hard to get a response, and later it may fail completely; 5. Wiring fault: Self-modified wiring or the addition of a one-touch window function may cause a fault in the window control circuit, rendering the window regulator ineffective.
14
0
Share

What to do if the LED bulb replacement for halogen headlights causes light scattering?

After installing LED bulbs, I noticed a severe issue with light scattering. Currently, part of the problem can be resolved by rotating the bulb to a certain angle. The original reflector in the car is designed for left-right reflection, so the LED chip must be aligned horizontally. For top-bottom reflection, align it vertically.
20
4
Share

What are the differences between Yadi M6 Jinyuan Edition and Guanneng Edition?

Here are the specific differences between Yadi M6 Jinyuan Edition and Guanneng Edition: 1. Appearance: The Guanneng Edition has a more rounded design, while the Jinyuan Edition features a more angular design. 2. Motor: The Jinyuan Edition is equipped with a 600W motor, whereas the Guanneng Edition comes with a 1000W motor. 3. Battery: The Jinyuan Edition has a 60V battery, while the Guanneng Edition has a 72V battery. Below is extended information about electric vehicles: 1. The main components of an electric vehicle include the frame, motor, battery, and controller. The controller is used to manage the vehicle's electrical circuits and is typically located under the rear seat. The motor serves as the power source for the electric vehicle, driving it forward. The battery stores electrical energy and powers all the electronic devices in the vehicle. 2. The battery is a wearable component that requires regular replacement. As the number of charge and discharge cycles increases, the battery's performance gradually declines, necessitating periodic replacement. During charging and discharging, ions within the battery move through the electrolyte, and some of these ions undergo chemical reactions with the electrolyte during movement.
15
5
Share

What to Do When the Auto Hold Button Doesn't Light Up?

Abnormal wear of the brake pads causes the braking system to malfunction. Check if the electronic parking brake is stuck. If it is, press it firmly twice to restore functionality. Turn on the car key and then press the foot brake. The battery controls the vehicle's electronic systems when the engine is off.
19
5
Share

Is It Necessary to Use a Hand-Stitched Steering Wheel Cover?

Hand-stitched steering wheel covers are determined based on the owner's needs. If you are not satisfied with the original steering wheel, concerned about the potential hazards of ordinary steering wheel covers, and desire a better grip experience, a hand-stitched steering wheel cover is definitely a great choice. Advantages of hand-stitched steering wheel covers: No rubber rings, so there is no worry about hardening or cracking, and the feel is no less than that of pre-made steering wheel covers. Hand-stitched covers fit the actual size of the steering wheel more precisely, eliminating the risk of slippage during driving due to a loose fit. Different steering wheel covers, due to defects in craftsmanship and materials, can easily cause insufficient friction between the cover and the steering wheel, leading to slippage and poor handling, which poses certain safety hazards. In contrast, hand-stitched steering wheel covers are tightly wrapped around the steering wheel through needlework, and the stitching at the three, six, and nine o'clock positions provides excellent positioning. Therefore, hand-stitched steering wheel covers do not have the same safety hazards as ordinary steering wheel covers. Disadvantages of hand-stitched steering wheel covers: Hand-stitched steering wheel covers are not easy to maintain, and removal for cleaning is also troublesome. Additionally, stitching requires certain skills, and issues like loose threads during the stitching process can affect the driver's control.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.