What brand of battery does the Changan CS55 use?

How many hours does a car maintenance take?

Car maintenance typically takes about an hour. Below is a related introduction to car maintenance content: 1. Air Filter: During operation, the engine inhales a large amount of air. If the air is not filtered, the dust in it can accelerate the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can also cause severe "cylinder scoring." The function of the air filter is to remove dust and particles from the air, ensuring that a sufficient amount of clean air enters the cylinder. 2. Fuel Filter: The fuel filter's role is to provide clean fuel to the engine by filtering out water and impurities from the gasoline. This optimizes engine performance and provides the best protection for the engine. During car maintenance, the service personnel will conduct other inspections based on the specific condition of the vehicle and may add other maintenance items, such as inspection, cleaning, and maintenance of the engine-related systems, tire alignment checks, inspection of various fastening components, etc.

1

Share

What Components Make Up an Electric Power Steering System?

An electric power steering system consists of components such as a torque sensor, vehicle speed sensor, electronic control unit (ECU), electric motor, and electromagnetic clutch. It utilizes the power generated by the electric motor to assist the driver with steering. The electric power steering system is a type of power steering system that directly relies on the motor to provide auxiliary torque. Working principle of the electric power steering system: The torque sensor is connected to the steering shaft. When the steering shaft rotates, the torque sensor starts working, converting the relative angular displacement between the input and output shafts caused by the torsion bar into an electrical signal, which is then transmitted to the ECU. The ECU determines the rotation direction of the electric motor and the magnitude of the assist current based on signals from the vehicle speed sensor and torque sensor, thereby achieving real-time control of the power steering assistance.

11

2

Share

Where is the rearview mirror heating switch for the Ford Mondeo?

The rearview mirror heating switch button is located at the lower left corner of the steering wheel. Press it once to activate the function. The working principle of rearview mirror heating involves installing an electric heating element (heating film) inside the mirror lenses on both sides. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element rapidly warms up to a set temperature within minutes, effectively removing fog and frost. Rearview mirror heating function: In addition to heating elements, some vehicles feature knob-type switches for rearview mirror heating. On the driver's side door, there is a knob at the front left with several symbols: L, 0, R, and a heating symbol. The heating symbol, which resembles a square frame with three upward-curving arrows, serves as the rearview mirror heating switch. Turning the knob to this symbol activates the heating function. The icon for button-type rearview mirror heating switches should be distinguished from the front windshield defogging button. A symbol with three upward-curving arrows inside a fan shape represents the front windshield defrosting button, while a similar symbol inside a square frame indicates the rearview mirror heating button. Precautions for using the rearview mirror heating function: After activating the rearview mirror heating function, the fog or frost does not disappear immediately but gradually clears after preheating. Excessive use of this function, especially for durations exceeding 30 minutes each time, can affect the lifespan, clarity, and brightness of the rearview mirrors. The rearview mirror heating function typically activates only when the external temperature is below 20 degrees Celsius. At higher temperatures, the mirrors will not heat up even if the switch is turned on. This function is designed to remove fog droplets and frost from the mirror surface but cannot eliminate raindrops during heavy rain. In such conditions, the heat generated by the heating element is insufficient to evaporate continuous raindrops, leading to blurred vision and impaired driving visibility. Vehicles equipped with rearview mirror heating feature specialized mirror lenses with heating function ports, differing from standard lenses. Therefore, it is crucial to consider this when replacing rearview mirror lenses.

12

5

Share

How Many Kilometers Should Truck Engine Oil Be Changed?

It depends on factors such as usual driving conditions, personal driving habits, and time intervals. If you frequently encounter traffic jams, drive in sandy areas, or in extremely hot or cold regions, the engine oil should be changed earlier. For conventional oil, it should be changed approximately every 5,000 kilometers. For semi-synthetic oil, change it around 7,500 kilometers. For full-synthetic oil, change it around 10,000 kilometers. Here are some additional details: 1. Vehicles that frequently drive on highways: If the vehicle often drives on highways with little traffic congestion, the oil change interval can be extended. Normally, conventional oil: 5,000 kilometers. Semi-synthetic oil: 7,500-10,000 kilometers. Full-synthetic oil: 10,000-15,000 kilometers. 2. New vehicles: The first and second oil changes must strictly follow the time and mileage specified in the vehicle's user manual. If either the time or mileage is reached, the oil should be changed because the initial oil contains a lot of metal debris, which is very harmful to sealing components, especially for turbocharged models, as it can severely damage the turbo shaft seal. From the third oil change onward, follow the normal mileage interval for oil changes.

19

3

Share

Can license plates under one's own name be swapped?

For non-commercial vehicles registered under the same owner (individual or organization) at the same registration location with the same type of license plate, an application can be made to swap the license plate numbers between vehicles. The same vehicle can change its license plate number once within a year. A license plate number is an identifier for a vehicle, consisting of Chinese characters, English letters, and numbers, and is issued by the vehicle management office. The Ministry of Public Security introduced the "Motor Vehicle License Plate Number Swap" measure several years ago to facilitate public selection of license plate numbers. Only vehicles registered under the same owner at the same location with the same type of license plate can swap numbers, known as the "three sames and one non-commercial" rule. For non-commercial vehicles registered under the same owner (individual or organization) at the same registration location with the same type of license plate, an application can be made to swap the license plate numbers between vehicles. The same vehicle can change its license plate number once within a year. It is important to note that to use the original license plate number, all traffic violations and accident liabilities related to the original vehicle must be resolved, and the vehicle must have a valid safety inspection and compulsory traffic insurance. Materials required for the application include: The original identity proof of the vehicle owner; Vehicle registration certificate (if not previously issued, apply for it first); "Motor Vehicle License and Certificate Application Form" (printed at the service window), signed by the authorized person for organizational vehicles or the owner for personal vehicles; If applying through an agent, submit the agent's original identity proof and a written authorization from the vehicle owner, with the agent signing the "Motor Vehicle License and Certificate Application Form"; One compliant vehicle photo for each vehicle (free on-site photography available); The original license plates of both vehicles.

6

3

Share

What does the EPC light mean in Chery vehicles?

The EPC indicator light can illuminate in two scenarios: during the power-on self-test and under other circumstances. The power-on self-test is a pre-driving check of all vehicle sensors. Typically, if the engine is not started after power-on, the light will turn off by itself after about 3 seconds. If the EPC light stays on after starting the vehicle or illuminates under other conditions, the possible causes include faults in the engine intake system, throttle body, fuel system, engine, ECU control unit, or brake lights. Below is a detailed explanation of the reasons for the EPC light illumination under other circumstances: Engine intake system fault: The EPC light will alert if the engine intake is obstructed or insufficient. Throttle body fault: Carbon buildup is a common issue with the throttle body. Additionally, dirt accumulation can affect intake, triggering the indicator light. Fuel system fault: Issues such as substandard fuel, fuel deterioration, or poor fuel atomization can cause the light to illuminate. Engine fault: Insufficient engine pressure or problems with components like the intake valves in the powertrain can also trigger the EPC light. ECU control unit fault: Interference with the vehicle's computer signals or false alarms from the computer may cause the light to turn on. Brake light fault: Malfunctions like non-functional brake lights, faulty brake switches, or brake circuit issues can lead to the EPC light illuminating. Solutions for when the EPC light illuminates: Troubleshoot intake system issues, use fuel with the appropriate octane rating, clean the throttle body, etc. Remove carbon deposits from relevant components. Re-flash the ECU with updated data. If the EPC light comes on, the driver can first try turning off the engine and restarting it to see if the light remains illuminated. If it does not come back on, there may be no issue, and the light might have been triggered by a temporary influence. If the light stays on or frequently illuminates, the vehicle should be taken to the nearest service center for professional diagnosis and repair to eliminate potential safety hazards. The full English name of EPC is Electronic-Power-Control, which translates to electronic power control. Most people refer to it as the engine electronic stability system. The EPC system primarily includes controllers and sensors related to the powertrain. When sensor data in the system is abnormal, the EPC system will take predefined actions to address the powertrain issues. Common EPC indicator lights are typically displayed in two colors: yellow and red. A yellow EPC fault light indicates that the vehicle can still be driven, but it should proceed slowly to a repair shop for inspection. A red EPC fault light signifies a more serious issue, and the vehicle should be pulled over immediately. Professional repair services should be contacted promptly, as continued driving could damage core components or compromise safety.

11

2

Share

What brand of battery does the Changan CS55 use?

How many hours does a car maintenance take?

What Components Make Up an Electric Power Steering System?

Where is the rearview mirror heating switch for the Ford Mondeo?

How Many Kilometers Should Truck Engine Oil Be Changed?

Can license plates under one's own name be swapped?

What does the EPC light mean in Chery vehicles?

What is the difference between a 6-speed automatic transmission and a 6-speed manual-automatic transmission?

What is the fuel consumption of the Ruicheng CC?

What does the C1122 engine speed signal fault mean?

Why does the driver's license show 0 points?