What brand of audio system is used in the Accord?

1 Answers
Dante
07/30/25 7:36am
The Accord uses a Pioneer brand audio system from Japan. Below are the specific details about the Accord: 1. Vehicle Positioning: The Honda Accord is a mid-size sedan under GAC Honda, available in both gasoline and hybrid versions. It has a length, width, and height of 4893mm, 1862mm, and 1449mm respectively, with a wheelbase of 2830mm. 2. Configuration: The Accord emphasizes safety performance, featuring a standard VSA system and front seat side airbags. 3. Powertrain: The Accord is equipped with i-VTEC and VTEC engines. The i-VTEC engine combines Honda's VTEC (Variable Valve Timing and Lift Electronic Control) technology with the VTC (Variable Timing Control) technology that continuously adjusts the valve timing across different engine speed ranges. This results in strong torque output and dynamic acceleration performance. Through the ECU (Electronic Control Unit), the opening and closing of the intake and exhaust valves are controlled to maintain optimal combustion conditions in the engine, achieving an ideal balance of high power output, low fuel consumption, and clean emissions.
Was this review help?
20
5
Share
More Forum Discussions

What is Four-Wheel Drive?

Four-wheel drive, also known as all-wheel drive, refers to a vehicle where both the front and rear wheels receive power. The following is related information about four-wheel drive: The function of four-wheel drive: It can distribute the engine's output torque in varying proportions to all the wheels based on the road conditions to enhance the vehicle's driving capability. Advantages of four-wheel drive: It is the transmission method with the highest cornering limit on roads, as it can allocate the optimal driving force to each wheel when the vehicle is cornering at high speeds. Therefore, this technology is widely adopted by high-displacement sedans that emphasize handling performance, with the primary purpose of installation being to improve effective driving force and cornering limits.
14
5
Share

How to Implement In-Car KTV in a Vehicle?

9
3
Share

What Causes the Fault Light to Illuminate in JAC Refine?

JAC Refine fault light illumination may be caused by issues with the vehicle's stability control system. Vehicle Fault Lights: Vehicle fault lights are indicator lights that illuminate when certain malfunctions occur in the vehicle. For example, if the battery is dead, the battery fault light will illuminate. Main vehicle fault lights include: The engine indicator displays the engine's operating status. If the oil warning light remains illuminated while driving, it indicates the oil level is below standard. The tire pressure warning light shows tire pressure conditions - if this warning light illuminates, it means the tire pressure is insufficient or the tire is damaged. The brake indicator light automatically illuminates when the handbrake is engaged and turns off when released. The airbag indicator displays the airbag's operational status, typically performing a self-check when the vehicle starts, with the light turning off after a few seconds.
4
3
Share

What documents should be carried in a private car?

Driver's license and vehicle license. The following is the relevant information about the driver's license and vehicle license: Driver's license: The People's Republic of China Motor Vehicle Driver's License, referred to as the driver's license, also known as the "driving license," is a certificate that must be applied for by motor vehicle drivers in accordance with the laws of the People's Republic of China. Vehicle license: The motor vehicle license is a legal document that permits a motor vehicle to drive on the roads within China. The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page is the signed certificate core, the back is the photo of the motor vehicle, and it is sealed with a plastic cover. The supplementary page is the signed certificate core.
8
0
Share

What to Do When Car Engine Oil Pressure is Insufficient?

Engine is the core component of a vehicle, serving as its power source. Through the operation of mechanical parts and the mixture of fuel and air, it outputs power. The working condition of engine oil directly determines the engine's service life. The inspection and handling methods for insufficient oil pressure are as follows: 1. Check whether there is oil in the oil pan. If there is no oil, it indicates that the oil pipe is broken, cracked, or the oil pan drain plug is loose, leading to oil leakage. 2. Check whether the oil pressure gauge and sensor are damaged. 3. Check whether the oil pump drive shaft and drive pin are broken, causing the oil pump to stop working. 4. Check whether the oil filter is blocked by foreign objects, whether the connecting rod bearing oil cavity cleaning plug is loose, etc., and eliminate the problems promptly.
6
0
Share

What kind of fuel should a China 6 vehicle use?

For China 6 compliant vehicles, simply follow the fuel requirements specified by the manufacturer. The fuel cap usually indicates the minimum required octane rating - just use fuel that meets or exceeds this standard. Additional information about China 6 standards: 1. China 6 is an emission regulation standard for vehicles. China 6 compliant vehicles meet these emission requirements, which is unrelated to fuel quality. 2. Gasoline quality doesn't directly affect emissions. Fuel quality primarily impacts engine carbon deposits, not environmental protection. Emissions are determined by the engine itself. 3. China 6 refers to emission standards, not a type of gasoline. These standards impose limits on exhaust emissions based on comprehensive vehicle technical conditions, where fuel is just one of many factors affecting emissions.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.