What brand of audio system does Li Auto use?

1 Answers
VonAmara
07/29/25 8:56pm
Li Auto uses TEAC audio systems, which is a well-known Japanese audio brand also referred to as "First Audio" in Chinese. Below is an introduction to car audio systems: Car Audio: An audio playback device installed to alleviate the monotony of travel for drivers and passengers. Initially, car AM radios were used, followed by AM/FM radios, tape players, and later evolved to CD players and digital audio systems compatible with DCC and DAT. Features: Modern car audio systems have reached high standards in sound quality, operation, and vibration resistance, ensuring stable performance and perfect sound quality even on bumpy roads.
Was this review help?
10
2
Share
More Forum Discussions

Should I Choose D Gear or L Gear When Driving Uphill in the Envision?

Choose L gear when driving uphill. Here is the extended content: The function of the L gear in the Envision: The L gear in the Envision is a speed-limiting gear, not a low-speed gear. It is used in extreme road conditions such as long downhill slopes, steep slopes, traffic congestion, and wading through water. The vehicle can switch from D gear to L gear at any time while driving, and vice versa (it is best to release the throttle when switching). When shifting from D gear to L gear, the lock button must be pressed, but when shifting from L gear to D gear, the lock button does not need to be pressed. Note: When driving under normal road conditions, use D gear and avoid driving in L gear. This is because, at the same gear and speed, the L gear will result in higher engine RPM and higher fuel consumption compared to the D gear.
20
4
Share

Does the Volvo Crystal Gear Shift Light Up at Night?

Volvo's crystal gear shift does not light up at night, but the addition of crystal significantly enhances both the texture and visual appeal of the gear shift. Models equipped with crystal gear shifts include the Volvo XC90 New Energy, BMW X5 (standard across all trims), Jaguar XFL, Bestune T99, WEY Mocha, Trumpchi GS5, and GA8. Other types of gear shifts: Straight-line gear shift: This is the most common type, offering convenient operation by simply pulling while holding the shift button, though it is prone to incorrect shifts. Stepped gear shift: Similar in prevalence to the straight-line type, this shift mechanism offers clear logic and reduces the likelihood of misoperation. Crystal gear shift: The incorporation of crystal greatly improves both texture and visual effects, further enhancing the vehicle's sense of luxury. Electronic rotary knob: Commonly found in some high-end models, this knob automatically rises when the vehicle is started and retracts when the engine is turned off.
5
1
Share

How to Add Antifreeze?

Antifreeze is added to the car's radiator. Here are the specific details about car antifreeze: 1. In cold weather, it prevents parts from system failures or cracks due to cooling issues. It also manages rust prevention and avoids excessive scale buildup that could clog the pipes, offering functions such as anti-corrosion, anti-scale, anti-boil, anti-freeze, and anti-rust. 2. The full name of antifreeze is antifreeze coolant, which is a coolant with antifreeze properties. It prevents the coolant from freezing in cold winter conditions when the car is parked, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. Antifreeze is a type of coolant with special additives, mainly used in liquid-cooled engine cooling systems. Its freezing point varies with the concentration of ethylene glycol in the aqueous solution.
3
4
Share

What Causes Difficulty in Starting a Hot Engine?

After the engine has been turned off for a while, the temperature in the engine compartment remains high. Fuel is prone to evaporation under such conditions, which can lead to high vapor pressure in the fuel rail. When this pressure exceeds the fuel supply system's pressure, vapor lock occurs, causing the fuel injector to spray an overly lean mixture of fuel vapor, making it difficult to start. The details are as follows: 1. The fuel injector normally sprays fuel, but if it leaks, it provides extra fuel. The more severe the injector leakage, the richer the air-fuel mixture becomes, leading to difficulty in starting a hot engine. 2. It could also be due to a faulty carbon canister purge valve. During a hot start, fuel atomization is already normal, and no additional fuel vapor is needed. If the carbon canister continues to supply fuel vapor to the intake manifold, the air-fuel mixture becomes too rich, resulting in difficulty starting.
12
0
Share

What are the body dimensions of the Mazda 3 Axela?

The Mazda 3 Axela has a body length of 4662mm, a width of 1797mm, a height of 1445mm, and a wheelbase of 2726mm. Below are specific details about the Mazda 3 Axela: Mazda 3 Axela data analysis: The fuel tank capacity is 50 liters, the drivetrain is front-wheel drive, the front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension. The Mazda 3 Axela is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 86 kW at 6100 rpm and a maximum torque of 148 Nm at 3500 rpm. Mazda 3 Axela fuel consumption data: The average fuel consumption for the 1.5L model is 5.9L; the 2.0L model averages 6.2L. The Axela is equipped with two Skyactiv-G naturally aspirated engines, a 1.5L and a 2.0L, producing maximum power outputs of 117 hp and 158 hp, and peak torques of 148 Nm and 202 Nm, respectively. The transmission systems include a 6-speed manual and a 6-speed automatic transmission. The Mazda 3 Axela is a four-cylinder vehicle. Relevant details about the Mazda 3 Axela are as follows: In terms of power, the Mazda 3 Axela offers a choice between a 1.5L naturally aspirated engine and a 2.0L naturally aspirated engine. The new Mazda 3 Axela is powered by 1.5L and 2.0L naturally aspirated engines, with maximum power outputs of 86 kW (117 PS) and 116 kW (158 PS), respectively. The former is paired with either a 6MT or 6AT transmission, while the latter comes with a 6AT transmission. Four-cylinder engines offer a good balance between fuel economy and smooth power delivery, with relatively low maintenance costs. Generally, the more cylinders a car engine has, the greater the power and stability. Conversely, fewer cylinders typically result in better fuel efficiency.
11
0
Share

Does filling up the gas tank affect the car?

Filling up the gas tank has the following effects on the car: 1. A full tank of gas increases the vehicle's load relatively, leading to a slight increase in fuel consumption compared to having half a tank. 2. In the event of accidents like scraping the bottom, a full tank of gas poses a higher risk of fuel leakage. 3. Continuing to add fuel after the pump automatically stops is a bad habit. Since gasoline is a volatile liquid, the fuel tank often contains vapor at room temperature. The fuel vapor emission control system is designed to introduce and burn fuel vapor to prevent it from evaporating into the atmosphere. The activated carbon canister storage device plays a crucial role in this process. If the tank is overfilled, liquid fuel instead of vapor enters the carbon canister, which can damage its structure.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.