What brand of audio system does Lexus use?

1 Answers
HectorAnn
07/28/25 10:15pm
Lexus uses Mark Levinson brand audio systems, which are designed to alleviate the monotony of travel for drivers and passengers. The Lexus lineup includes models such as the Lexus ES, Lexus RX, Lexus LS, Lexus NX, and Lexus CT. Taking the Lexus ES as an example, its body dimensions are: length 4975mm, width 1866mm, height 1447mm, with a wheelbase of 2870mm and a fuel tank capacity of 60.6 liters. The Lexus ES is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 127kW at 6600rpm and a maximum torque of 208Nm.
Was this review help?
9
5
Share
More Forum Discussions

What are the penalties for driving a modified vehicle?

Penalties for driving a modified vehicle are as follows: 1. Penalty regulations: No unit or individual may assemble a motor vehicle or alter the registered structure, construction, or characteristics of a motor vehicle without authorization. This includes altering the model, engine number, frame number, or vehicle identification code of the motor vehicle. 2. Driving an illegally modified motor vehicle on the road: The public security traffic management department will detain the vehicle, confiscate the illegal devices, order the restoration of the original condition, and impose a fine in accordance with the law. For illegally modified motor vehicles, the public security traffic management department will not issue a safety technical inspection qualification mark. If the speed exceeds the prescribed limit, the public security traffic management department will impose a fine and revoke the driver's license in accordance with the law. If it constitutes a violation of public security management, the public security organ will impose penalties such as fines or detention in accordance with relevant regulations.
13
1
Share

How long is the lifespan of the Teana 2.5V6 engine?

If used and maintained properly, this engine can last up to 500,000 kilometers without issues. The Teana is a mid-sized car under Nissan's brand, and it has been well-received by many consumers since its launch. The newer models of the Teana no longer use large-displacement naturally aspirated engines. Instead, they are equipped with two types of engines: one is a 2.0-liter naturally aspirated engine, and the other is a 2.0-liter turbocharged engine. Additional information: Below is an introduction to the two engines used in the newer models: 1. The 2.0-liter naturally aspirated engine in the new Teana: It has a maximum power of 117 kW and a maximum torque of 208 Nm. The engine reaches its maximum power at 6,000 rpm and its maximum torque at 4,400 rpm. This engine is equipped with a dual C-VTC continuous variable valve timing system and direct fuel injection technology, and it features an aluminum alloy cylinder head and block. It is paired with a CVT transmission. 2. The 2.0-liter turbocharged engine in the new Teana: It has a maximum power of 185 kW and a maximum torque of 380 Nm. The engine reaches its maximum power at 5,600 rpm and its maximum torque at 4,000 rpm. This engine is equipped with a dual C-VTC continuous variable valve timing system and variable compression ratio technology. It is also paired with a CVT transmission.
7
4
Share

What is the little Cayenne called?

The little Cayenne is a vehicle under the Porsche brand, called the Porsche Macan. The Macan is a five-seater SUV model with a design that leans more towards a sporty style, making the little Cayenne appear like a crossover vehicle. Below are the details about the Porsche Macan: 1. Body Design: The Porsche Macan features a front fascia design with a trapezoidal grille, fully black interior grille, and rounded headlights. Below the headlights, there are large side air intakes. Although the overall design lacks intricate and flashy lines, it gives a fashionable, dynamic, and sleek impression without being ostentatious. The rear design includes flat and rounded taillights, with the entire rear, except for a sharp line at the bumper position, featuring smooth curved surfaces. 2. Interior Design: The interior follows Porsche's family style, contrasting with the rounded exterior by using numerous straight and sharp lines for a symmetrical layout with clear button arrangements. The three-spoke multifunction steering wheel offers a great driving feel. Additionally, the use of materials like chrome, lacquer, and genuine leather enhances the overall premium feel.
7
1
Share

What are the effects of a faulty ABS on braking?

ABS failure prevents the brake pads from resetting. Here is additional information: 1. ABS malfunction: In emergency braking situations, the ABS function will not operate. The ABS system prevents wheel lock-up during hard braking to avoid accidents. 2. ABS braking function: It prevents wheel lock-up, allowing the car to steer while braking, ensuring directional stability and preventing skidding or deviation. It is currently the most advanced and effective braking system in automobiles. 3. ABS working principle: During braking, ABS quickly determines wheel lock-up status based on speed signals from each wheel speed sensor. It closes the normally open input solenoid valve for the locking wheel to maintain braking force. If the wheel continues to lock, it opens the normally closed output solenoid valve, causing the braking pressure on that wheel to drop rapidly due to the direct connection to the brake fluid reservoir, preventing complete wheel lock-up from excessive braking force.
11
5
Share

Does running a red light capture the front or rear of the vehicle?

Running a red light captures the rear of the vehicle. It is determined by three photos taken by an electronic camera: the first photo shows the vehicle crossing the intersection stop line, including the red light signal and license plate number; the second photo shows the vehicle completely passing the stop line, including the red light signal and license plate number; the third photo shows the vehicle continuing to move, mainly by comparing the change in the vehicle's position in the second photo, including the red light signal and license plate number. Capturing these three photos confirms the vehicle ran a red light. Running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light means stop, a green light means go, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and driving through an intersection during a red light constitutes the traffic violation of running a red light. Six scenarios of running a red light: Stopping immediately after crossing the line at a red light (when the red light is on, the vehicle cannot brake in time, and the front crosses the stop line): If the vehicle only just crosses the stop line during a red light but stops immediately, this is not penalized. However, if there is obvious movement after crossing the line, it will be penalized. The electronic camera captures three photos for running a red light: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present is it confirmed as running a red light, which incurs a six-point deduction under Article 10 of the "Road Traffic Safety Law." Running a red light under police direction (the signal is red, but the traffic officer signals to proceed): When there is a conflict between the traffic signal and the officer's gesture, drivers must obey the officer's on-site command. If running a red light occurs due to the officer's direction, the driver can request a diversion certificate from the local traffic police station to avoid penalties. If the driver disputes the penalty, they can appeal through administrative reconsideration or litigation. Stopping after the entire vehicle crosses the stop line at a red light (failing to brake in time, causing the entire vehicle to cross the stop line): If the vehicle stops completely after crossing the stop line without further movement, this is not considered running a red light. Reversing after crossing the stop line (attempting to avoid penalties by reversing after crossing the stop line at a red light): Vehicles are prohibited from reversing at railway crossings, intersections, one-way roads, bridges, sharp turns, steep slopes, or tunnels. Violations may result in a warning or fine. Mistakenly running a red light behind a large vehicle (due to obstructed view from a large vehicle ahead, following it through the intersection): Drivers must maintain sufficient visibility to see traffic signals and ensure a safe braking distance. Generally, if a vehicle is captured behind a large vehicle while rushing through an intersection, it is penalized as running a red light. Passing through an intersection during a yellow light (crossing the intersection when the signal turns yellow): If the driver continues to proceed after the yellow light is already on, this is also considered running a red light if captured.
3
0
Share

What is the real difference between 95 and 92?

92 and 95 differ mainly in the content of n-heptane and isooctane. Analysis as follows: 1. Composition difference: 92 gasoline consists of 92% isooctane and 8% n-heptane, while 95 gasoline consists of 95% isooctane and 5% n-heptane. The main difference lies in the purity of isooctane—the higher the purity, the better the gasoline's anti-knock performance, and relatively, the higher the price. 2. Stability difference: 95 gasoline has excellent stability and burns more easily, while 92 gasoline has an octane rating of 92%. The two types of fuel should not be mixed, as mixing gasoline can cause poor engine performance and significantly affect engine lifespan. 3. Applicable vehicle difference: When choosing between 92 and 95 gasoline, it is essential to follow the car's manual.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.