What brand is zextour tires?

1 Answers
StVanessa
07/30/25 6:11am
zextour is the Journey tire produced by Yuanxin Tire Co., Ltd., a very young independent tire brand. Yuanxin Tire Co., Ltd. was established in 2020 and is located in Guangrao County, Dongying City. Due to the brand's short history, limited influence, and relatively low tire prices, its market presence is mostly confined to Shandong province and surrounding regions. When using zextour tires in daily driving, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. As tires wear from driving, the tread grooves gradually become shallower. If the tread pattern wears flat, it will lose its drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may also pose hidden dangers of tire blowouts during high-speed driving. Additionally, promptly remove pebbles lodged in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not use water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.
Was this review help?
17
3
Share
More Forum Discussions

What is the fuel consumption of the 3.6L Wrangler?

The fuel consumption of the Wrangler is 9 liters/100KM. Meaning of fuel consumption: Vehicle fuel consumption refers to the fuel used to travel a certain distance at a constant speed, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated under specified speed conditions to determine the theoretical experimental fuel consumption data of the model. Classification of fuel consumption: Fuel consumption includes constant-speed fuel consumption and road cycle fuel consumption. Constant-speed fuel consumption refers to the fuel economy indicator when a car travels at a constant speed on a good road surface. Road cycle fuel consumption is the fuel economy indicator measured when a car travels repeatedly on the road according to specified speed and time specifications, also known as multi-condition road cycle fuel consumption.
3
4
Share

What is the reason for Dongfeng Nissan displaying chassis control?

Dongfeng Nissan displaying chassis control may be due to issues with the vehicle stability system or damage to the chassis. Below are detailed explanations and solutions: Vehicle Stability System Malfunction: The vehicle stability system generally refers to the Electronic Stability Program (ESP). The Electronic Stability Program is a collective term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. If there is an issue with the vehicle stability system, it is recommended to visit a repair shop for inspection. Chassis Damage: The chassis plays a role in forming the overall shape of the car, receives power from the engine, enables the car to move, and ensures normal driving. In this case, it is recommended to visit a repair shop for inspection.
1
5
Share

Is the Red Light Flashing on the Mitsubishi Outlander's Dashboard After Locking the Car a Normal Phenomenon?

The red light flashing next to the eco mode after locking the Outlander is the activation of the anti-theft indicator, indicating that the vehicle has entered the anti-theft state. Introduction to the Car Anti-Theft System: The car anti-theft system is designed to prevent the theft of the vehicle itself or items inside the car. It consists of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators. The earliest car door locks were mechanical, used only to prevent doors from opening automatically while driving to avoid accidents, serving a safety function rather than an anti-theft purpose. Types of Car Anti-Theft Functions: A car anti-theft device is an installation on the vehicle designed to increase the difficulty and prolong the time required for theft, acting as a guardian for the car. By connecting the anti-theft device to the car's electrical circuit, it achieves the goal of preventing vehicle theft, intrusion, and protecting the car while realizing various functions of the anti-theft device. With the advancement of technology, to counter increasingly sophisticated car theft methods, various types and structures of anti-theft devices have been developed. Anti-theft devices can be categorized into four main types based on their structure: mechanical, chip-based, electronic, and network-based.
6
4
Share

What is the reason why the Toyota P2109 trouble code cannot be deleted?

Toyota P2109 trouble code cannot be deleted possibly because the fault has not been resolved or there might be an issue with the vehicle's system. Below are detailed explanations and solutions: Fault Not Resolved: Automotive trouble codes are codes generated by the vehicle's computer ECU after analyzing faults. Common trouble codes are often caused by sensor malfunctions or poor sensor performance. Trouble code P2109 indicates an incorrect closed position of the throttle valve opening angle sensor. You can observe after repairing it. Vehicle System Issue: The vehicle navigation system mainly consists of a host, display screen, operation keyboard (remote control), and antenna. It enables digital intelligent navigation for field surveys and travel. If there is an issue with the vehicle system, you can try upgrading the system to resolve it.
1
0
Share

What is the fuel tank capacity of the SAIC Maxus V80?

The 2021 SAIC Maxus V80 has a total of 58 models, all with a fuel tank capacity of 80L. The vehicles are equipped with a 2.0-liter turbocharged engine and feature front-engine, front-wheel drive. Among vehicles in the same class, the 2020 Ruitu has a fuel tank capacity of 80 liters, while the 2021 Transit has a fuel tank capacity of 68 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual amount of fuel may exceed the marked capacity. Maintenance tips for the fuel tank are as follows: Drain accumulated water and sediment from the tank, and check for leaks at fuel pipe connections and switches. For fuel tank caps equipped with air valves and vapor valves, ensure that the ventilation holes are clear. The filter screen at the fuel filler neck should remain intact to prevent impurities from entering the tank and clogging the fuel lines during refueling. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling while driving.
4
3
Share

What are the details of Toyota's SCVT 10-speed transmission?

Toyota's SCVT 10-speed transmission is detailed as follows: Advantages of Toyota's SCVT 10-speed transmission: The transmission has a smaller size and lighter weight, reportedly comparable to an 8AT transmission. Additionally, with the support of hybrid technology, it offers better fuel efficiency overall. This allows even a 1.2T engine to deliver sufficient torque to drive the vehicle. Precautions for using the CVT transmission: In cold conditions, it is necessary to fully warm up the transmission. Even in relatively warm regions, the lowest temperatures can reach around -20 degrees Celsius. Under such conditions, any mechanical device left outdoors may become sluggish and difficult to operate.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.