What brand is Xiaofeng motorcycle?

How to Check Tire Pressure on Geely Binrui?

Geely Binrui's method for checking tire pressure is as follows: There is a toggle button on the right side of the multifunction steering wheel; you can see the tire pressure display by toggling it. Tire pressure refers to the air pressure inside the tires, which determines various vehicle performance aspects such as load capacity, power, and braking. The hazards of low tire pressure in motor vehicles are as follows: Increased movement in various parts of the tire, leading to abnormal heating due to excessive rolling; Causes heavy steering and tendencies to veer, among other factors detrimental to driving safety; The friction between the tire and the ground increases exponentially, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength. High-speed driving may lead to tire blowouts. The hazards of high tire pressure in motor vehicles are as follows: Excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the vehicle during driving; Increased body vibration, indirectly affecting the lifespan of other components.

15

2

Share

What is the actual fuel consumption of the Dongfeng Fengshen AX7?

Dongfeng Fengshen AX7 has different actual fuel consumption depending on the engine model. The details are as follows: 1. 1.4T engine: Maximum power of 140 horsepower, engine model L4-DFM-A14T, average fuel consumption of 8.75, fuel consumption range between 7.71~9.79; 2. 1.6T engine: Maximum power of 167 horsepower, engine model L4-10UF01-5G02, average fuel consumption of 9.28, fuel consumption range between 8.21~10.35; 3. 2.0L engine: Maximum power of 147 horsepower, engine model L4-PSA-RFN10LH3X, average fuel consumption of 9.06, fuel consumption range between 7.90~10.22.

15

2

Share

What is the battery model for the Envision car key?

The battery model for the Envision car key is the CR2032 coin cell. The specifications of the CR2032 model are: battery diameter of 20mm and thickness of 3.2mm. This type of battery has a voltage of 3V. Generally, car keys use a 9V power supply, so each time the batteries are replaced, all three batteries are changed. Below is relevant information about car key battery models: 1. CR2016 coin cell battery: This model of coin cell battery is highly prevalent in today's car key remotes, almost being one of the most universal car remote batteries. 2. CR2025 coin cell battery: The usage rate of this model is much lower than that of the CR2016. However, some car keys still use it. It is thicker than the 2016 model but has a relatively higher energy storage capacity. 3. Alkaline 12V battery: The 12V alkaline battery was commonly used in early car key remotes and shop rolling shutter electric doors. Early Honda and Toyota models, among other older key remotes, used this battery model. Its characteristics include small size, high output voltage, and a relatively long remote control distance.

20

4

Share

How many liters of engine oil should be added to a BMW X1?

BMW X1 requires 4.5 liters of engine oil. The original equipment manufacturer (OEM) oil brand for BMW X1 is Shell. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The oil model recommended in the official BMW X1 manual is 5W-30. Any oil model that meets these specification parameters can be used. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in a BMW X1 is as follows: Wait for the engine temperature to drop, which also allows the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out. Use a specialized wrench to remove the oil filter. Apply some oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the oil filler cap on the engine valve cover. Generally, pour about three-quarters of a bottle. Start the engine and let it run for 5 minutes. Check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs. After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.

17

5

Share

What is the emission standard of the Malibu XL?

The Malibu XL complies with the China VI emission standard. To meet the China VI b emission requirements, the new 1.0T/1.3T engines are equipped with an intelligent active electric carbon canister pump, marking its first global application. This technology can reduce evaporative emissions by 67%, meeting both China VI b standards and the strictest California evaporative emission regulations. Here is an introduction to the Malibu: 1. The Malibu XL is powered by the eighth-generation Ecotec engine, which focuses on high efficiency, low emissions, and low fuel consumption. It features Tripower three-stage variable valve management technology, a dual-scroll electric wastegate turbocharger, 35MPa high-pressure fuel injection technology, ATM active thermal management system, full-variable displacement oil pump, and an intelligent active electric carbon canister pump, among others. 2. The new-generation engine also incorporates the ATM active thermal management system, combined with a split-flow water jacket design. By utilizing sensor data, the cooling system is controlled to maintain optimal temperatures in various circuits, enabling precise thermal management of the system. This facilitates rapid warm-up, oil heating, and shutdown cooling, improving engine efficiency and reducing emissions.

16

3

Share

How to Remove the Spare Tire of the Leiling?

The spare tire of the Leiling is located under the trunk partition. Lift the partition at the bottom of the trunk to find the vehicle's spare tire and tools such as the jack. The spare tire can be directly removed. Here is some extended information about the tire: 1. The Leiling comes standard with a full-size spare tire. The specifications of the full-size spare tire are exactly the same as the other four tires on the vehicle, allowing it to replace any tire that is temporarily or permanently unusable. 2. Passenger cars are generally equipped with a spare tire, which can be categorized into three types based on size: full-size spare tire, non-full-size spare tire, and no spare tire. A full-size spare tire means its specifications are identical to those of the car's regular tires. 3. The spare tire is actually for emergency use only and should not be used for an extended period. Regardless of whether the spare tire is wide or narrow, manufacturers have specific production and usage requirements.

14

2

Share

What brand is Xiaofeng motorcycle?

How to Check Tire Pressure on Geely Binrui?

What is the actual fuel consumption of the Dongfeng Fengshen AX7?

What is the battery model for the Envision car key?

How many liters of engine oil should be added to a BMW X1?

What is the emission standard of the Malibu XL?

How to Remove the Spare Tire of the Leiling?

What are the differences between Magotan B7 and B8?

What is the tire model for Nissan Tiida?

What is the engine displacement of the Magotan 330?

Does Lexus Offer Lifetime Free Maintenance?