What brand is wingood tires?

1 Answers
LeTeagan
07/25/25 11:25am
wingood is a brand under Wanda Boto. Wanda Boto specializes in the production of all-steel radial tires, engineering machinery radial tires, semi-steel radial tires, and light truck tires. In addition to wingood, there are also brands such as PRIMUS, YOTO Yongtong, ECED PCR, TBR, and OTR tires. Factors affecting tire usage are as follows: 1. The correct installation of tires is directly related to their service life, especially when replacing new tires. 2. Both underinflation and overinflation of tires can affect their lifespan. If the tire pressure is too low, the radial deformation increases, causing excessive deformation on both sides of the tire wall and leading to shoulder wear on the tread, which raises the tire temperature and significantly reduces its service life. If the tire pressure is too high, the rigidity of the tire increases, deformation and contact area decrease, increasing the unit pressure on the central part of the tread and accelerating wear. 3. The greater the vehicle load, the shorter the tire lifespan. Tires should be used within the maximum load capacity corresponding to the specified load index.
Was this review help?
20
0
Share
More Forum Discussions

What is the reason for the repeated jumping of the Wuling Hongguang S1 door lock?

The reason for the repeated jumping of the Wuling Hongguang S1 door lock is either a malfunction in the vehicle's central locking system or the vehicle's door not being properly closed. Central locking system malfunction: There are many types of central locking systems in modern cars, but the basic components mainly include the door lock switch, door lock actuator, and door lock controller. A malfunction in the central locking system causing the door lock to fail is usually due to issues with the door lock actuator or door lock controller. If this occurs, it is recommended to have a technician inspect and repair it at a service point, as diagnostic tools can quickly detect the fault information. Vehicle door not properly closed: Since the central locking system is also compromised, using a mechanical key can only lock one door. Locking multiple doors simultaneously with a mechanical key requires the central locking system.
19
2
Share

Where to Find the Engine Number?

The engine number is usually found on the outer surface of the engine block, or on the vehicle's nameplate, the nameplate inside the engine compartment. You can also check the engine number on the car purchase invoice; the factory certificate has the engine number; for commercial vehicles, the operating license can be used to query the engine number; the vehicle purchase tax payment certificate contains the engine number; the registration record with the public security authorities has the engine number; the vehicle insurance card includes the engine number; it is also located below the windshield directly in front of the driver's position. The simplest and most direct method is to check the vehicle's green book or the car's registration certificate. The engine number is like a person's ID number, representing each vehicle. It stores very important information about the vehicle. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine, for a batch of identical products. It is used to indicate information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power, etc. Engines installed in cars or multi-purpose passenger vehicles are marked with the professional manufacturer's name, model, and production number as required. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer's range, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one engine number, and each engine's number is unique. Composition of the vehicle engine number: Front part: Includes the product series code, generation symbol, and regional or corporate code, which are selected by the manufacturer as needed with corresponding letters, but must be approved and recorded by the industry standard's centralized unit. Middle part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear part: Composed of symbols for structural features and usage characteristics. Tail part: Distinguishing symbol. When differentiation is needed within the same product series due to improvements or other reasons, the manufacturer selects appropriate symbols to indicate this, and the rear and tail parts can be separated by a hyphen.
10
2
Share

Why does the Wuling Hongguang S have only one reverse light?

Because the Wuling Hongguang S is equipped with only one reverse light, as is the case with many other vehicle models. On the other side, it corresponds to the rear fog light, which also reduces the failure rate. The reverse light is installed at the rear of the car to illuminate the road behind and warn vehicles and pedestrians behind that the car is reversing. All reverse lights are white. Since 2001, China's National Traffic Law has revised regulations, requiring each vehicle to be equipped with at least one fog light and one reverse light. Vehicles less than 6 meters in length are mandated to have one reverse light, with the other being optional. Due to this national regulation, many automakers, in compliance with the law, install only one reverse light. This not only adheres to national legal requirements but also saves manufacturing costs. The national law's reduction of one reverse light has a scientific basis. Since reverse lights are white and highly bright to illuminate the rear, having two symmetrical reverse lights could make it difficult for drivers to see the road ahead clearly. On dark roads at night, this could mistakenly lead drivers to think the car in front is moving in the opposite direction. A single reverse light is more easily identifiable. When the tail light on the other side lights up, it creates a combination of red and white lights, naturally eliminating such misunderstandings. This also benefits color-blind individuals and better captures drivers' attention, helping to avoid traffic accidents.
15
0
Share

What does the EPC fault display on Volkswagen Tiguan indicate?

When the Volkswagen Tiguan displays an EPC fault, it indicates a malfunction in the Engine Power Control system, and the engine must be inspected immediately. Main causes for the EPC light to illuminate in Volkswagen Tiguan: 1. Dirty throttle body – requires cleaning. 2. Brake light failure – check the brake switch and wiring. 3. Poor fuel quality can also trigger the EPC light. Volkswagen Tiguan tire pressure light reset procedure: 1. Turn off ignition. 2. Press and hold the "Reset" button. 3. Turn on ignition while keeping the button pressed. 4. Release the "Reset" button. 5. Briefly press the "Clock Adjustment" button once. 6. The maintenance cycle display will enter reset mode. 7. After several seconds, the normal view will restore. 8. To check the remaining distance until next maintenance: - Press the "Clock Adjustment" button 4 times. - The multifunction display will show the remaining mileage until next service.
14
5
Share

Can the Teana still be driven if the engine yellow light is on?

Teana engine yellow light on indicates that there is a problem with the engine. If there are no other abnormalities in the car, it can still be driven. Reasons why the engine fault light is on: Exhaust emissions do not meet standards, fuel injector is clogged, throttle position sensor, and some vehicle transmission system faults are also indicated through the engine fault light. Two situations when the engine yellow light is on: The first is when the car's power is turned on, the vehicle will perform a self-check. At this time, not only the engine yellow light is on, but other fault lights will also light up together, and then they will all go out. The second is when the car is started, the engine fault yellow light remains on. This is the ECU reminding that there is a fault in the engine, which is an abnormal phenomenon.
1
0
Share

What is the displacement of the Honda Accord?

The Accord comes with three displacement options: models equipped with 1.5T and 2.0T turbocharged engines, and a model with a 2.0L naturally aspirated engine. Importance of displacement: Engine displacement is one of the most important structural parameters, representing the size of the engine more accurately than bore and number of cylinders. Many performance indicators of the engine are closely related to displacement. Classification of car displacement: In China, car classifications are determined by displacement. Mini cars have a displacement of ≤1.0L; compact cars range from 1.0-1.6L; midsize cars range from 1.6-2.5L; executive cars range from 2.5-4.0L; and luxury cars have a displacement of >4.0L.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.