What brand is Turanza tire?

1 Answers
LeLydia
07/29/25 7:39pm
Turanza is the Bridgestone brand's Turanza series tire. The Turanza series tires focus on providing a comfortable driving experience, incorporating multiple leading technologies such as a nano-polymer tread compound, Footprint Contour Pressure (FCP) design for uniform shoulder ground pressure, and noise-reducing groove design. With excellent comprehensive performance, they are selected as standard equipment by world-renowned mid-to-high-end passenger car models. Bridgestone tires are products of Bridgestone Corporation of Japan and are widely used in various car brands worldwide. Bridgestone has successfully developed a new in-wheel motor drive system for electric vehicles, where the motor part functions as a shock absorber. This system, with motors built into the wheels, offers high power transmission efficiency and responsiveness, enables independent control of all four wheels, and eliminates the need for components like drive shafts and differential gears.
Was this review help?
19
5
Share
More Forum Discussions

What is the air suspension height value of the Audi A6L?

Audi A6L's air suspension lowers the vehicle height by 2.5cm in automatic damping mode and 2cm in Sport damping mode. Working principle of air suspension: The air suspension system mainly consists of a control computer, air compressor, pressure storage tank, pneumatic front and rear shock absorbers, and an air distributor. Functions of air suspension: Vehicle level control, vehicle level adjustment, and ADS function. The system uses an air compressor to generate compressed air, which is then delivered to the air chambers of the springs and shock absorbers. Height sensors are installed near both front and rear wheels. Based on the signals from these sensors, the vehicle's computer determines changes in vehicle height and controls the compressor and exhaust valves to compress or extend the springs, thereby achieving damping effects and altering the vehicle's height.
18
3
Share

Why doesn't Nissan support CarPlay?

Nissan Connect does not support CarPlay because Nissan Connect and CarPlay are different systems, belonging to two separate in-car infotainment platforms. Nissan Connect cannot be hacked to enable CarPlay functionality, though most Nissan models do come with CarPlay-compatible head units. How CarPlay works: The system operates by connecting an iPhone to the vehicle via USB, upon which the two devices immediately establish a handshake. This allows users to access various iPhone functions without manually operating or looking at the phone screen, enabling drivers to keep their attention and focus on the road. This control method makes driving safer and more convenient. The purpose of CarPlay: CarPlay was designed to allow drivers to use all iPhone functions hands-free, including music playback, navigation, calls, reading messages, and even watching online videos. CarPlay enables access to most basic iPhone features through the vehicle's control panel. Key functions include Siri voice assistant, iTunes music playback, Apple Maps, and messaging services. With CarPlay, drivers can make and receive calls without taking their hands off the steering wheel, and can also listen to voicemail messages.
18
0
Share

What is the drag coefficient of the Elantra?

The drag coefficient is 0.19. Introduction to automotive drag: Automotive air resistance refers to the component of the force exerted by air on a vehicle moving in a straight line, acting in the direction of travel. Air resistance is proportional to the square of the speed, meaning that if the speed doubles, the resistance increases by a factor of three. Impact of high-speed driving: Therefore, high-speed driving has a very noticeable effect on air resistance. At high speeds, the engine must allocate a significant portion of its power, or fuel energy, to overcoming air resistance. When a vehicle is in motion, it must overcome mechanical resistance, rolling resistance generated by the tires (commonly referred to as road resistance), and air resistance. As the vehicle's speed increases, air resistance gradually becomes the primary driving resistance. At speeds above 200 km/h, air resistance accounts for almost 85% of all driving resistance.
10
4
Share

How many simulated gears does the Honda CR-V have?

Honda CR-V simulates a 7-speed dual-clutch transmission. Introduction to the 7-speed dual-clutch transmission: The 7-speed dual-clutch transmission is developed based on 6-speed technology, simplifying the related hydraulic system. The 7-speed dual-clutch transmission is generally paired with small-displacement engines. Features: The clutch is located between the engine and the transmission, acting as a 'switch' for power transmission between the engine and the transmission. It is a transmission mechanism that can both transmit and cut off power. Its main function is to ensure smooth vehicle starts, reduce impact loads on transmission gears during gear shifts, and prevent overload in the drivetrain. The dual-clutch is installed in a sealed oil chamber. While the dry friction plates on the moving disc can provide the most direct transmission efficiency, they are also more prone to overheating. Therefore, their thermal meltability is inferior to that of wet clutches, resulting in a relatively lower torque capacity.
16
5
Share

Is Computer Matching Necessary After Throttle Body Cleaning?

Computer matching is essential after cleaning the throttle body. Below are the specific steps for throttle body adaptation: 1. Release the pedal: Turn off the ignition switch and wait for at least 10 seconds. Fully release the accelerator pedal, then turn the ignition switch to the ON position and wait for 3 seconds. 2. Repeat the operation: Within 5 seconds, quickly repeat the following operation 5 times—fully depress the accelerator pedal and then fully release it. 3. Depress the pedal: Wait for 7 seconds, then fully depress the accelerator pedal and hold it for about 20 seconds until the MIL stops blinking and starts to stay lit. Within 3 seconds after the MIL light stays on, fully release the accelerator pedal. 4. Idle operation: Start the engine and let it idle for a while. Allow the engine to idle for more than 20 seconds, then rev the engine two or three times to confirm that the idle speed and ignition timing meet the specified requirements.
6
1
Share

Should the Highlander use 92 or 95 octane gasoline?

The Highlander should use 92 octane gasoline. Relevant information about gasoline grades is as follows: Gasoline grades: Gasoline grades refer to the octane number, which indicates the anti-knock performance. The higher the grade, the better the anti-knock performance. Octane value of gasoline: Each type of gasoline has a different octane value and anti-knock performance. This is mainly because the higher the engine's compression ratio, the higher the pressure and temperature inside the cylinder, making it more prone to engine knocking. The appropriate gasoline grade for each vehicle depends on its compression ratio. For turbocharged engines, it is recommended to use higher-grade gasoline. Various gasoline grades are actually formulated according to the needs of engines with different compression ratios.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.