What brand is Toyo tires?

2 Answers
DiValentina
07/29/25 7:55am
Toyo is a Japanese tire brand. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure driving performance. The functions of tires include: 1. Bearing the weight of the vehicle; 2. Ensuring good adhesion between the wheels and the road surface; 3. Improving the vehicle's traction, braking, and off-road capability; 4. Directly contacting the road surface and working with the vehicle suspension to mitigate shocks during driving, ensuring good ride comfort and smooth driving.
Was this review help?
12
4
Share
DiJasper
08/12/25 11:09am
TOYO Tires is a Japanese brand, and I've driven many cars, so I'm quite familiar with their products. The full name of TOYO is Toyo Tire, founded in 1943, specializing in high-performance tires. Many car enthusiasts prefer using them for racing or modified cars because of their exceptional grip and minimal slipping on wet roads. After switching to TOYO tires myself, I noticed shorter braking distances, making me feel safer. They offer a wide variety of tires, including versions for SUVs, sedans, and trucks, so it's essential to choose based on your vehicle's needs. Their durability is also impressive, typically lasting 50,000 to 70,000 kilometers. With regular checks on tire pressure and wear, the lifespan can be even longer. Remember, tires are crucial for driving safety, so choosing a reliable brand is very important.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

Can You Drive with an Empty Coolant Reservoir?

You cannot drive with an empty coolant reservoir. If the coolant temperature reaches the red zone on the gauge, it indicates insufficient coolant. It is recommended to immediately pull over and turn off the engine to avoid damaging it. Methods to determine if coolant is low: Observe the coolant warning light on the dashboard. If it lights up, it is likely due to low coolant, though it could also be caused by excessively high cylinder temperatures. Check the coolant reservoir. If the fluid level is below the minimum mark (MIN), do not continue driving and add coolant promptly. Inspect the water level markings on the coolant reservoir. The normal coolant level should be between the maximum and minimum marks. If the coolant is below the minimum mark, it indicates a shortage. How to choose coolant: The basic indicators of coolant are its freezing and boiling points. Market-available coolants come in specifications such as -15°C, -25°C, -30°C, and -40°C freezing points. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.
11
1
Share

What is the fuel consumption of the Great Wall Tank 300?

The comprehensive fuel consumption given by the Ministry of Industry and Information Technology is 9.3 liters per 100 kilometers. The following is a related introduction to the Great Wall Tank 300: 1. Power: The Great Wall Tank 300 model is equipped with a 2.0T turbocharged engine, model E20CB, with a maximum horsepower of 227, maximum power of 167, maximum torque of 387, using No. 92 or higher gasoline, with direct fuel injection and an aluminum alloy cylinder block. 2. Body dimensions: The length of the Great Wall Tank 300 is 4760mm, the width is 1930mm, the height is 1903mm, the wheelbase is 2750mm, the vehicle is a 5-door, 5-seat SUV, the minimum ground clearance is 224mm, and the curb weight comes in three variants: 2075kg, 2110kg, and 2150kg.
6
4
Share

What is the maximum speed limit for sedans on highways?

On highways, the maximum speed for sedans must not exceed 120 kilometers per hour. Below are some important considerations for driving on highways: 1. Control your driving speed: Speeding on highways is detrimental to driving safety. The higher the speed, the greater the centrifugal braking distance, and the worse the vehicle's handling stability. Additionally, excessive speed shortens the driver's sight distance and increases the likelihood of misjudgment. Therefore, controlling driving speed is the primary condition for ensuring safety on highways. 2. Avoid driving too slowly: In China, the minimum speed limit for normal driving on highways is 60 km/h. Driving too slowly can, on one hand, affect vehicles in the same lane and fail to utilize the highway's intended speed and efficiency advantages; on the other hand, it can easily cause traffic congestion or chaotic driving conditions with consecutive overtaking by following vehicles. 3. Avoid tailgating: A safe following distance should vary based on driving speed, weather, and road conditions. The faster the speed, the greater the following distance should be, especially during snow, rain, fog, or icy road conditions, where the distance should be significantly increased.
10
4
Share

What is Porsche PCM?

Engine Control Module. The ECU (Electronic Control Unit), also known as the vehicle's onboard computer, is the central module that all other modules in the car communicate with. The PCM (Powertrain Control Module) is responsible for receiving sensor signals and performing complex calculations to control fuel supply, air distribution (electronic throttle), injection and ignition timing, intake pressure adjustment, as well as determining engine compensation control coefficients based on factors such as temperature, load, knock, and combustion conditions. Additional relevant information is as follows: 1. Introduction: Modern digital transmission systems use the Pulse-Code-Modulation (PCM) system. Initially, PCM was not designed for transmitting computer data but rather to enable a single trunk line between switches to carry more than one telephone signal. PCM has two standards: E1 and T1. 2. Services: PCM can provide users with a variety of services, including digital data leased line services with rates ranging from 2M to 155M, as well as other services such as voice, image transmission, and distance learning. It is particularly suitable for users who require higher data transmission rates and greater bandwidth.
4
2
Share

How to Find the First Reference Point When Exiting the Right Reverse Parking?

For the right reverse parking exit in Subject 2 of the driving test, the best method is to observe the rear tire from the left rearview mirror. As soon as it clears the corner of the parking space, immediately turn the steering wheel to the maximum. Below are specific techniques for Subject 2 of the driving test: 1. Slow Speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stall while keeping the speed as slow as possible, allowing ample time for adjustments at each step. 2. Adjust Rearview Mirrors: After getting into the car, always adjust the rearview mirrors properly, which is crucial for reverse parking and parallel parking. 3. Master the Three-Point Alignment Method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately identify and observe these points to ensure precise positioning. 4. Pay Attention to the Four Corners of the Car: The front corner is prone to touching the outer boundary line during reverse parking, while the rear corner may touch the side boundary lines of the parking space. The front corner is also likely to cross the line during curve driving and right-angle turns. During parallel parking, the front corner may touch the outer boundary line or the left front corner of the parking space, and the right rear corner may touch the right boundary line of the parking space. Therefore, always be mindful of the four corners and the outer boundary lines.
14
3
Share

Why can't the car accelerate beyond 60 mph?

Here are the reasons why the car can't accelerate beyond 60 mph: 1. Insufficient engine RPM: The gear is too high, causing drag and lack of power. It is recommended to shift gears above 2500 RPM. 2. Just going uphill: The car is either going uphill or carrying too much weight, making it difficult for the engine to accelerate. 3. Low-speed engine: The engine is a low-speed type, with limited torque and horsepower at high RPMs. 4. Untimely gear shifting: For example, using only 3rd gear to reach 60 mph makes it naturally hard to accelerate further. This can also be caused by faults in the fuel supply system, failure to control fuel pressure or ignition timing as required, or issues with spark plugs and high-voltage wires. Since the condition of spark plugs and high-voltage wires is essential for increasing speed, they should be checked regularly to ensure normal acceleration. Extra attention should be paid to fuel pressure and injection volume, and they should be used properly to prevent acceleration issues.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.