What brand is the zeekr001?

2 Answers
DeTanner
07/29/25 4:46am
zeekr001 is a model under the ZEEKR brand. Here are specific details about ZEEKR: 1. Introduction: ZEEKR, positioned as a trendy technology brand, represents an uncompromising pursuit of extreme product performance and user experience. ZE stands for ZERO, symbolizing both the starting point and the infinite possibilities at the end. E represents Electric (electricity)-Evolution (evolution)-Era (era), signifying the evolution of the electric-driven era. 2. Configuration: In terms of driving performance, ZEEKR is equipped with the Permanent Magnet Dual Motor System, capable of achieving full-scenario autonomous driving assistance. It also features luxury configurations such as a fully automatic air suspension, dynamic chassis control system, and sensor-activated frameless automatic doors.
Was this review help?
1
5
Share
DelCharles
08/12/25 5:34pm
The Zeekr 001 is an electric shooting brake under the ZEEKR brand, which is a premium electric vehicle marque launched by China's Geely Auto Group, specializing in high-performance intelligent vehicles. The design is razor-sharp, with a shooting brake silhouette reminiscent of Porsche but more practical. I personally test-drove a friend's car—its acceleration is astonishingly quick, achieving 0-100 km/h in under 4 seconds, with a range easily exceeding 700 km. Fast charging replenishes over half the battery in just 30 minutes. The large in-car touchscreen controls everything, from navigation to music, all intelligently integrated. The ride is stable and whisper-quiet. Young people adore it because it offers far more affordability than luxury cars in the same class, making it a standout product of China's rising auto brands. As the parent company, Geely has strategically expanded both domestically and internationally over the years. ZEEKR embodies China's innovation ambitions in the EV sector, rivaling even Tesla. Buyers choose it for its cost-performance ratio and cutting-edge tech appeal, delivering exceptional comfort for both city commutes and long-distance travel.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

How to Solve Hill Descent Control Malfunction?

Hill Descent Control malfunction solution: First, try restarting the vehicle to see if the malfunction can be automatically resolved; if the malfunction persists after restarting, you can switch the transmission to manual mode and maintain a low gear for downhill driving, then proceed to a 4S shop or repair center to read the fault code and fix the issue. The Hill Descent Control system, also known as the slope control system, allows the driver to smoothly navigate steep downhill sections without pressing the brake pedal, maintaining full control. As needed, the braking system automatically controls each wheel to move forward slightly faster than walking speed, allowing the driver to focus entirely on steering.
5
3
Share

What is the model of BMW's hatchback car?

BMW currently has only one hatchback model, which is the BMW 1 Series with the chassis code F20. In terms of powertrain: The BMW 1 Series is equipped with three engines, including a 1.5L 3-cylinder turbocharged engine with a maximum power of 100kW, a 2.0L 4-cylinder turbocharged engine with a low-power version of 135kW and a high-power version of 165kW, as well as a 3.0L inline 6-cylinder turbocharged engine with a maximum power of 250kW. Dimensions: The BMW 1 Series has a length, width, and height of 4239mm, 1748mm, and 1421mm respectively, with a wheelbase of 2660mm.
20
2
Share

Does Painting Require Removing the Original Paint?

Painting does require removing the original paint because repainting increases the thickness of the paint film, making the painted area higher than the original surface. Therefore, the original paint must be cleaned off before applying new paint; otherwise, the paint surface will become uneven and noticeably raised. Precautions for full-body painting: 1. Pay attention to color differences; 2. Take protective measures; 3. Monitor the spray gun pressure and working environment during painting; 4. Control the baking time. The general painting process involves: first performing bodywork, grinding down the original paint and base layer of the area to be painted to a level two coats thinner than the standard paint surface, then applying putty, mixing paint, spraying, baking in a paint booth, and finally air-drying for over ten hours.
5
1
Share

What Are the Consequences of Incorrect Timing Belt Installation?

If the timing belt of a vehicle is installed incorrectly, it can lead to two scenarios: 1. The first scenario: If the timing belt is installed one tooth off the correct timing point, it will cause the engine malfunction light to illuminate, difficulty in starting the vehicle, and the engine control unit will report a timing-related fault code. 2. The second scenario: If components such as the timing belt, timing belt tensioner, or timing belt tensioner pulley are not properly installed, or if there is a significant misalignment in the number of teeth, it can result in the timing belt breaking. This will prevent the camshaft from operating normally, leading to a collision between the valves and pistons, causing severe engine damage. The only reliable solution is to strictly follow the manufacturer's standards and requirements when replacing the timing belt to avoid unnecessary losses.
11
2
Share

What Causes the Jerking Sensation When Releasing the Throttle in a Mercedes-Benz?

There are several reasons for the jerking sensation when releasing the throttle in a Mercedes-Benz: Suspension system failure: The front wheel shock absorbers are in a compressed state, while the rear wheel shock absorbers are in an extended state, creating a front-low, rear-high nodding posture. When the car comes to a complete stop, the front and rear springs return to their original state, causing the front of the car to lift slightly and the rear to lower, resulting in a jerking sensation. Increasing the stiffness of the front suspension can resolve this issue. Sudden braking: When braking abruptly, a jerking sensation may occur. It is advisable to avoid sudden braking and instead slow down gradually when applying the brakes.
13
4
Share

Where is the oil pressure sensor located on an Alto?

The oil pressure sensor on an Alto is located above the oil filter housing. Function of oil pressure sensor: Generally, vehicles have one sensor, while some models may have two - one on the engine block and another on the cylinder head. Symptoms of a faulty sensor include oil pressure warning alerts, constant illumination or failure of the oil indicator light, or false warnings. Consequences of a damaged oil pressure sensor: The most obvious sign is the continuous illumination of the oil warning light. While this doesn't directly affect driving, it prevents real-time monitoring of oil conditions, potentially delaying critical alerts to the driver. Continued operation with excessive pressure or insufficient oil could severely damage the engine, possibly leading to complete failure.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.