What brand is the Yidong car?

1 Answers
Timothy
07/30/25 9:20am
Yidong is a car model under the Changan Automobile brand. Below are the specific details about the Yidong: 1. The Yidong is a compact sedan from Changan, with a wheelbase of 2700 mm, and dimensions of 4730 mm in length, 1820 mm in width, and 1505 mm in height. 2. The Yidong is equipped with two types of engines: a 1.6-liter naturally aspirated engine and a 1.4-liter turbocharged engine. The 1.6-liter naturally aspirated engine delivers 128 horsepower and a maximum torque of 161 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4000 rpm. This engine features DVVT technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT. 3. The 1.4-liter turbocharged engine produces 158 horsepower and a maximum torque of 260 Nm, with the maximum power achieved at 5500 rpm and the maximum torque ranging from 1500 to 4000 rpm. This engine also features DVVT technology and direct fuel injection, and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission.
Was this review help?
10
2
Share
More Forum Discussions

What are the differences between FAW and GAC?

The differences between FAW and GAC lie in historical background, vehicle models, production quality, and complaint ratios. Below are the distinctions between the two: 1. Historical Background: FAW Toyota was established in 2000 as Toyota's first partner in China, while GAC Toyota was founded in 2004 as Toyota's second partner. In terms of seniority, FAW Toyota is older than GAC Toyota. 2. Vehicle Models: Most of Toyota's main models are under FAW, including the Corolla, Crown, Reiz, RAV4, and Prado, as well as the Coaster bus for officials. GAC Toyota, on the other hand, offers models like the Levin, Camry, Highlander, Alphard, Yaris, and C-HR. 3. Production Quality: In 2016, GAC Toyota was the only one among Toyota's 50 global factories to achieve zero defects for the entire year. Additionally, the 2.0T direct-injection engine produced by GAC Toyota has been exported overseas and is even used in the Lexus ES200, something FAW Toyota has not accomplished. 4. Complaint Ratios: In 2017, FAW Toyota sold 693,000 vehicles, while GAC Toyota sold 440,000, making FAW's sales 56% higher. However, in terms of complaints, FAW Toyota had 1,017 entries on authoritative automotive complaint websites, compared to GAC Toyota's 342. Thus, the complaint-to-sales ratio is significantly higher for FAW Toyota than for GAC Toyota.
16
4
Share

How many points are deducted for failing to yield to a school bus as required while driving a motor vehicle?

Failing to yield to a school bus as required while driving a motor vehicle results in a deduction of 6 points. According to the penalty provisions in the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": If a motor vehicle driver fails to yield to a school bus as required, they will be fined and have 6 points deducted. Below are the relevant regulations when encountering a school bus: 1. One-way road: When a school bus stops on the road to pick up or drop off students, it should pull over to the right side of the road, turn on the hazard warning lights, and display the stop sign. When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake; 2. Non-one-way road: When a school bus stops on a road with two or more lanes, vehicles behind and in the adjacent lane must stop and wait, while vehicles in other lanes should slow down and pass. Vehicles stopped and waiting behind the school bus must not honk or use lights to urge the school bus to move.
5
0
Share

What are the test items for driving license subject 3?

Subject 3 test items include vehicle preparation, lighting simulation test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving. Below are some tips for the Subject 3 test: 1. Drive according to instructions: Listen carefully to the voice broadcast instructions of Subject 3 and follow them accordingly. Remember not to perform operations before the voice broadcast ends; you must wait until the broadcast is complete before proceeding to the next step. 2. Pay attention to special zones: In many areas, the voice broadcast no longer reminds candidates of special zones such as school zones, bus stops, and pedestrian crossings. However, candidates must perform corresponding deceleration or yielding operations based on the project signs and road markings. For school zones, apply the brakes 10 meters before the project sign, with the speed below 30km/h. For bus stops, apply the brakes 10 meters before the project sign, with the speed below 30km/h. For pedestrian crossings, apply the brakes to decelerate within 30 meters before the crossing, and stop to yield if pedestrians are crossing.
9
0
Share

How to Open the Maybach Hood?

There are two steps to open the Maybach hood: 1. Locate the engine release lever on the left side of the Maybach driver's seat, pull the lever by hand until you hear a click sound. 2. Then move to the front of the vehicle, insert your hand into the gap of the popped-up hood, find and press the release switch inside while lifting the hood simultaneously to fully open it.
18
4
Share

Why Does Frost Form on the Inside of Car Windows?

Frost forming on the inside of car windows is primarily caused by the temperature difference between the cold glass (in contact with the outside environment) and the warm, humid air inside the vehicle, leading to condensation of water vapor on the glass surface. Here are solutions to address frost on car windows: 1. Use the heater: Activate the vehicle's heating system to melt the frost. Start the engine, wait until the coolant reaches operating temperature, then turn on the cabin heater with airflow directed toward the windshield. Once melted, wipe the glass dry with a clean cloth. 2. Apply de-icing spray: Specialized anti-frost sprays can effectively dissolve frost without scratching the windshield surface.
1
2
Share

How to Measure the 4 Wires of an Idle Speed Motor?

Measurement method for the idle speed motor: Use the resistance range of a multimeter to measure the resistance values of the four pins separately. The coil resistance should be around several tens of ohms, and the measured resistance values of the two sets of coils should be similar, indicating that the idle speed motor is functioning properly. More detailed information is as follows: 1. The idle speed motor is a component that controls the idle speed of a motor vehicle: When the engine runs without load, it is called idle speed. The idle speed motor is primarily used to manage the vehicle's idle speed, aiming to adjust the idle speed based on the engine load during idling. The idle speed stepper motor is mounted on the throttle body and is controlled by the engine control unit to regulate the engine's idle speed. When the engine speed deviates from idle, the throttle valve adjusts, controlling the amount of air entering the intake manifold and is mechanically operated by the accelerator pedal cable. 2. The throttle body has a bypass air passage that supplies air during engine idle (when the throttle valve is closed): The pivot of the automatic idle speed motor extends into the bypass air passage, adjusting the air flow through it. The engine control unit uses input signals from various sensors to move the pivot of the automatic idle speed motor in and out of the bypass air passage to regulate the engine's idle speed. When the ignition key is turned to the 'on' position, the automatic idle speed motor starts operating. This switch signal is input to the ECU to determine whether the engine is in idle condition. Additionally, the motor's current position is fed back to the ECU by the motor position sensor.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.