What brand is the Volkswagen CC audio system?

3 Answers
CourtneyDella
07/23/25 3:09pm
The model is equipped with Harman Kardon audio system. Here are the specific details: Speakers: Depending on the model, it comes with either 8 or 12 speakers. The Harman Kardon audio system delivers excellent performance. When using the audio system, adjustments can be made in the equalizer for an even better sound experience. Introduction: The Volkswagen CC, under the FAW-Volkswagen brand, is a mid-size sedan. The vehicle has a body length of 4865 mm, a width of 1870 mm, a height of 1459 mm, and a wheelbase of 2841 mm. The body structure is a 5-door, 5-seat configuration, with a fuel tank capacity of 66 liters. The vehicle comes with a warranty of 3 years or 100,000 kilometers, whichever comes first.
Was this review help?
17
4
Share
ArcherDella
08/10/25 11:07am
I've researched car audio systems for many years, and the Volkswagen CC uses different branded audio systems depending on the year and configuration. The base version typically comes with Volkswagen's standard audio system, which is decent and suitable for daily radio or pop music listening. However, if you opt for the premium version, especially in certain years' high-end CC models, it features a Dynaudio audio system. I once drove a 2015 model, and the sound quality was truly pure and refined—clear highs, rich mid and low frequencies, with excellent layering for classical or jazz music. Dynaudio is a high-end Danish brand that has collaborated with Volkswagen for years, specifically tuned for in-car environments, so it minimizes noise interference while driving. While not top-tier, it offers great value for money, being more practical than Bose or Harman Kardon systems. To check your audio system brand, look for markings on the door or information in the manual configuration—it's straightforward. In summary, the Volkswagen CC's audio system depends on the trim: the standard version is adequate, while the premium version offers a more enjoyable experience.
Was this review help?
12
1
Share
Expand All
LaElliot
09/22/25 4:54am
As a frequent driver of the Volkswagen CC, my 2018 model comes with the standard factory audio system, which delivers clean and crisp sound, perfectly adequate for daily commutes whether listening to the radio or via Bluetooth from my phone. However, I've heard from friends that the higher trim with Dynaudio offers a more immersive experience, featuring powerful bass and a surround-like effect at highway speeds. In fact, the audio brand in the Volkswagen CC varies by model—mine has the standard Volkswagen setup, but upgrade options include professional brands, which is a boon for audiophiles. On long trips, I’ve experimented with adjusting the equalizer, boosting the bass to liven up the cabin ambiance. If your car doesn’t specify an audio brand, it’s likely the base version with smoother, distortion-free sound. Spending some time tweaking the settings can significantly enhance your listening experience with minimal effort.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

Does the Vios have one or two rear fog lights?

The Vios has one rear fog light. Here is an introduction to car lighting: Function of fog lights: Fog lights are installed at the front and rear of the vehicle to illuminate the road and alert vehicles in front and behind to maintain distance during rainy or foggy conditions. However, fog lights should not be used when driving at night without fog, as the front fog lights lack a glare shield and the rear fog light bulbs have high wattage. This can create dazzling brightness for oncoming drivers and those following behind, further compromising driving safety. Installation standards for fog lights: The emitted light must not directly or indirectly cause discomfort to the driver through the rearview mirror or other vehicle reflections. The light direction should remain forward and not change with the steering angle, and the emitted light should not cause glare or discomfort to oncoming drivers or other road users.
17
1
Share

Which is Better, Direct Injection or Multi-Point Fuel Injection for Cars?

Multi-point fuel injection is generally better for cars. The differences between direct injection and multi-point fuel injection are as follows: Fuel Consumption: Direct injection has lower fuel consumption, while multi-point fuel injection has lower requirements for fuel quality. Components: Both direct injection and multi-point fuel injection have complex structures and higher costs. Operation: In a direct injection engine, high-pressure fuel is injected into the combustion chamber in a fine mist, which absorbs heat as it evaporates, cooling the cylinder and thereby reducing emissions. Multi-point fuel injection involves injectors installed on the intake pipe of each cylinder, with fuel being injected into the cylinder from multiple points. Technical Requirements: Direct injection has higher technical requirements, with the main challenge being the implementation of stratified combustion. Multi-point fuel injection improves upon the uneven distribution of the air-fuel mixture seen in single-point injection but does not enhance fuel atomization or the mixing of fuel and air.
19
3
Share

What is the normal voltage for a car fuel pump?

Car normal fuel pump voltage is 350 volts. The following is an introduction to the fuel pump: Fuel pump composition: Among the four wires of the car fuel pump, two are fuel level sensors (commonly known as floats), one is for power supply, and one goes to the fuel gauge; the other two are fuel pump wires, one for power supply and one for grounding. The fuel pump has a large working current, so the wires are thicker, while the sensor wires are thinner, making them easy to distinguish. Function of the fuel pump: It is to draw gasoline from the fuel tank and deliver it through pipes and the fuel filter to the float chamber of the carburetor. Thanks to the fuel pump, the fuel tank can be placed at the rear of the car, away from the engine and lower than the engine. There is no fixed replacement cycle for the fuel pump. Generally, after about 100,000 kilometers of driving, the fuel pump may show abnormalities.
16
3
Share

What does torque refer to in car parameters?

Torque in car parameters refers to the torque force of the vehicle and the moment output from the crankshaft end of the engine. Here are specific details about torque: 1. With a fixed engine power, torque is inversely proportional to the engine speed. The faster the speed, the smaller the engine torque; the slower the speed, the greater the engine torque. This also reflects the vehicle's load capacity within a certain range. 2. Like power, torque is one of the indices of a car engine, reflecting the vehicle's performance, including acceleration, climbing ability, and suspension. 3. The definition of torque is: the reciprocating motion of the piston in the cylinder, where each reciprocation does a certain amount of work, measured in Newton.
18
2
Share

What is the fuel consumption of the Everest?

The Everest currently has 11 models on sale. Among them, the Everest 2020 2.3T gasoline automatic two-wheel drive luxury edition 5-seater and elite edition 5-seater, equipped with a 275 horsepower engine, have an NEDC fuel consumption of 9.3L per 100 km. The Everest 2020 2.3T gasoline automatic four-wheel drive luxury edition 7-seater, flagship edition 5-seater, flagship edition 7-seater, luxury edition 5-seater, and elite edition 5-seater; as well as the sports edition 2.3T gasoline automatic four-wheel drive luxury edition 5-seater, flagship edition 7-seater, luxury edition 7-seater, and flagship edition 5-seater, totaling 9 models, all equipped with a 275 horsepower engine, have an NEDC fuel consumption of 10.1L per 100 km. The fuel tank capacity is the same across different Everest models. The distance that can be covered on a full tank of fuel is as follows: For models equipped with a 275 horsepower engine, the fuel tank capacity is 80L, and the distance that can be covered on a full tank is 80/9.3*100=860 km. For models equipped with a 275 horsepower engine, the fuel tank capacity is 80L, and the distance that can be covered on a full tank is 80/10.1*100=792 km. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power and require more gasoline to burn and perform work. Heavier vehicles also consume more fuel due to the greater driving torque needed to move the additional weight. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in cold temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.
6
0
Share

Can the clutch height of the classic Nissan Sylphy manual transmission be adjusted?

The clutch height of the classic Sylphy manual transmission can be adjusted. There is a small clutch lever near the transmission under the car, where the lever connects to the clutch cable. A screw at this connection allows for height adjustment. After adjustment, start the car to test the clutch. There is no way to adjust the clutch weight of the new Nissan Sylphy. If the clutch becomes increasingly heavy to press, the main causes may be issues with the clutch pressure plate, clutch disc, or release bearing. In such cases, it is necessary to visit a 4S shop for repairs. Relevant precautions for the clutch: The clutch must be thoroughly cleaned before installation to remove anti-rust grease and debris. The clutch can be installed coaxially or on separate shafts. The axial direction must be fixed, and neither the driving nor the driven parts should have axial movement. When installed on separate shafts, the coaxiality between the driving and driven shafts should not exceed 0.1mm.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.