What brand is the veyvv7 off-road vehicle?

1 Answers
GabrielaRose
07/30/25 9:14am
weyvv7 is a vehicle from the WEY brand. Below is relevant information about the VV7:1. VV7 vehicle data: The VV7 is a mid-size luxury SUV under the WEY brand of Great Wall Motors. The vehicle's length, width, and height are 4765mm, 1931mm, and 1655mm respectively, with a wheelbase of 2950mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 172kw and a maximum torque of 360nm.2. Introduction to WEY: WEY is an SUV automobile brand under Great Wall Motors, established in 2016. Its unique vertical logo originates from the iconic flagpole of the 'Baoding Zhili Governor's Office,' a landmark building in the hometown of its founder, Mr. Wei Jianjun, in Baoding, China. The brand's product lineup includes series models such as the VV7, VV6, VV5, and VV7PHEV new energy vehicles.
Was this review help?
8
1
Share
More Forum Discussions

Where is the location of the air conditioning filter in Golf VII?

The air conditioning filter in Golf 7 is located behind the glove compartment on the passenger side. You need to remove the glove compartment to access and replace the air conditioning filter. The car's air conditioning filter, commonly known as the pollen filter, serves the following purposes: 1. It filters the air entering the cabin from the outside to improve air cleanliness. Generally, the filtered substances include impurities in the air, such as tiny particles, pollen, bacteria, industrial exhaust, and dust. 2. As a leader in Volkswagen's design, the Golf 7 is equipped with the EA211 series 1.6L and 1.4T engines. Although the displacement remains the same as the Golf 6, the power parameters of these two engines have changed. The 1.6L engine has a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual or a 6-speed automatic transmission.
3
2
Share

Where is the Cruze water pump located?

The Cruze water pump is located on the engine block. If the Cruze water pump is leaking, here are the repair steps: 1. Remove the water pump: First, drain the coolant from the water pump, remove the V-belt, use a special tool to press out the water pump pulley, and then remove the water pump. 2. Disassemble the water pump: Remove the water pump bearing, then separate the water pump impeller and seal assembly from the bearing. 3. Reassembly: Press the bearing onto the impeller, then press the impeller and seal assembly into their designated positions. Press the bearing onto the water pump pulley seat, ensuring the bearing end face is flush with the housing and the impeller surface is 0.1-0.3mm below the pump housing surface. 4. Inspection: The reassembled pump shaft should rotate smoothly, with no detectable radial play in the bearing. Finally, refill with new coolant.
12
5
Share

What is the rated engine speed of a car?

Each company tunes their engines differently, so the rated speed also varies. Some higher-end cars can reach over 6,000 RPM, while rotary engines can even exceed 11,000 RPM. Generally, only manufacturers and 4S stores have this information. Here is some relevant information: Engine speed: The engine can truly demonstrate its advantages when the speed exceeds 2,000 RPM. The range between 2,000 and 4,000 RPM is considered the healthy speed zone for an engine, allowing it to perform optimally. If the speed is too low, fuel combustion in the cylinders is incomplete, leading to carbon buildup in the engine, which can cause significant damage over time. Speed information: Different car models and engine displacements have varying rated and maximum speeds. Generally, for passenger cars, the red zone starts between 6,000 and 7,000 RPM. Entering the red zone indicates that the current speed is approaching the engine's rated limit.
14
5
Share

Can the BMW X3 use 92 gasoline?

The minimum fuel grade for the BMW X3 is 95, and 92 gasoline cannot be used. Different types of vehicles generally use different engines, and the fuel grade specified for the engine may also vary. Additional Information: 1. 92 gasoline consists of 92% isooctane and 8% n-heptane, while 95 gasoline consists of 95% isooctane and 5% n-heptane. The proportions of isooctane and n-heptane in these two fuel grades are different. The higher the purity of isooctane, the stronger the anti-knock performance of the gasoline. 2. If the engine uses fuel that does not meet the specified grade during operation, knocking may occur. This is due to incomplete combustion of the fuel in the engine, which not only increases fuel consumption but also reduces the engine's power output.
19
3
Share

What Causes Car Vibration When the Air Conditioner is On?

Here are the reasons for car vibration when driving: 1. Spark plugs with carbon deposits: After a period of use, spark plugs can accumulate carbon deposits. If not cleaned in time, this can reduce the engine's torque output, causing vibration when the air conditioner is on. 2. Abnormal cylinder pressure: Generally, older cars have a normal cylinder pressure of around 10.5, while newer cars have pressures of 11 or more. If the cylinder pressure is abnormal, the car's computer will detect cylinder misfire and automatically cut off fuel supply, leading to vibration when starting the car until it fails to start. 3. Poor fuel quality: The fuel octane number represents the fuel's anti-knock index. Higher-grade fuel can extend the lifespan of the three-way catalytic converter and reduce emissions. Additionally, engines with different compression ratios require different fuel qualities. Using the wrong gasoline can cause severe engine carbon deposits, resulting in car vibration when the air conditioner is on.
12
1
Share

Where is the Ford Mondeo Fog Light Fuse Located?

Ford Mondeo fog light fuse is located inside the fuse box under the cover panel on the lower left side of the instrument panel. The purpose of fog lights is to make the vehicle visible to others in conditions of reduced visibility such as fog or heavy rain, hence fog light beams need strong penetration capability. Most vehicles use halogen fog lights, while higher-end models may feature LED fog lights. Below is a classification of automotive lights: 1. Headlights, combined headlights are positioned at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe nighttime driving; 2. Taillights, combined taillights are located at the rear of the vehicle, mainly providing illumination and signaling functions; 3. Turn signals, used to indicate left or right turns to other road users. Regulations require them to be amber in color; 4. License plate lights, primarily illuminating the license plate to allow identification of the vehicle registration in dark conditions.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.