What brand is the Verna car?

Is it necessary to install a power tailgate at a 4S dealership?

Installing a power tailgate is not mandatory at a 4S dealership, but it is more appropriate to do so there. The quality of installation at a 4S dealership is guaranteed, and any issues that arise will be covered under warranty. Installing a power tailgate involves electrical circuits, and 4S dealerships specialize in serving a specific car brand, so they have a better understanding of the vehicle's functional components. This makes them more professional in wiring and power sourcing, ensuring the original car circuits remain unaffected. Below are the features of a power tailgate: Manual and automatic switch: When opening the trunk, you can use a manual method or a foot-sensing method at the rear of the vehicle. This is particularly convenient for shorter individuals or those carrying too many items to free their hands, making it easier to place items in the trunk. Emergency lock function: In situations where the tailgate needs to be closed urgently, you can stop its operation by pressing a button or switch while the tailgate is opening or closing. This operation is very convenient. Memory function: The tailgate can adjust its height automatically. The driver can control the opening height via a button. Press the tailgate switch and wait for it to reach the driver's preferred height, then hold the switch for more than 5 seconds until a beep is heard. The next time the tailgate is opened, it will maintain this height. Anti-pinch function: During the opening or closing of the power tailgate, if it encounters a person or obstacle, it will reverse direction. This effectively prevents pinching injuries, ensuring safety for both adults and children, and also avoids damage to the vehicle.

17

4

Share

Can a Flood-Damaged Car Be Identified?

Flood-damaged cars can be identified. Vehicles typically have a specified wading depth marked in centimeters. If a car exceeds this depth, it can be classified as flood-damaged. Based on the extent of water damage, flood-damaged cars can be divided into two types: one where water rises above the wheels and enters the interior, known as a partially flooded car, and another where the entire vehicle is submerged, referred to as a severely flooded car. Methods to identify a flood-damaged car: Inspect the engine compartment: If a car has been submerged in water, even after cleaning, some wiring in the engine compartment may still retain mud or water stains. Check the seats: If the interior has been flooded, the car would have been dried out. Seats that have been soaked and then dried will show signs of damage, so look closely for excessive wrinkling, which could indicate water damage. Examine the seat belts: Pull out the seat belts completely to check for mold or dampness. If multiple seat belts show these signs, the car is likely flood-damaged. Inspect the chassis: The chassis is the most direct indicator of a car's condition. Look for obvious signs of rust. If the chassis has been submerged in water for an extended period, the rust marks will be quite noticeable.

11

2

Share

How long does it take for the color to match after repainting a white car?

After repainting, it takes about one month for the color to match. If there is a color difference after painting, a darker color within one month may indicate that the paint has not fully dried. However, if the color remains darker after one month, it means the color is incorrect, and you can go to the 4S shop for a respray. Here are some suggestions regarding car repainting: If the primer is exposed, repainting is necessary; otherwise, it will damage the rustproofing of the steel plate and accelerate its corrosion. There will inevitably be a color difference after repainting, which is usually only noticeable under strong light. The reason is that the original car paint has faded due to sunlight exposure, resulting in a lighter or changed color. Computer-mixed paint cannot perfectly match the faded paint but can only come very close. Over time, the color difference after repainting will become less noticeable, but it will always remain.

14

4

Share

Can you turn right at a red light when driving a motor vehicle?

Whether a motor vehicle can turn right at a red light depends on the following situations: Circular traffic light: If the circular traffic light at an intersection turns red and there are no other lights, vehicles in the right-turn lane can turn right directly. However, be careful not to interfere with other vehicles, as well as pedestrians and vehicles on the road behind and to the right. Arrow-shaped right-turn indicator: If there is a circular red light and an arrow-shaped right-turn sign next to it, you need to look at the right-turn arrow light. When the red arrow is lit, you cannot turn right. If you turn right, it will be considered running a red light. Additional sign on a circular red light: At some intersections with complex road conditions, there may be a reminder above the traffic light indicating whether you can turn right at a red light. If the prompt says "Right turn on red," then you can turn right. If the prompt says "No right turn on red," you must wait for the green light to turn right. No right-turn sign: When encountering a circular red light, also check if there is a no right-turn sign nearby. If there is, you cannot turn right. The rightmost lane is not a right-turn lane: In some areas, the rightmost lane may not necessarily be a right-turn lane. You should drive according to the lane markings on the ground, not based on the circular traffic light. Laws and regulations: According to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicle traffic lights and non-motor vehicle traffic lights indicate: When the green light is on, vehicles are allowed to pass, but turning vehicles must not hinder the passage of straight-moving vehicles and pedestrians. When the yellow light is on, vehicles that have already crossed the stop line can continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motor vehicle traffic lights and pedestrian crossing signals, non-motor vehicles and pedestrians should follow the instructions of motor vehicle traffic lights. When the red light is on, right-turning vehicles can pass if they do not hinder the passage of other vehicles and pedestrians. According to the "Road Traffic Safety Law," the regulations on traffic lights are as follows: Article 25, Paragraph 2 states that traffic signals include traffic lights, traffic signs, traffic markings, and the command of traffic police. Article 26 states that traffic lights consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light indicates a warning. Article 38 states that vehicles and pedestrians should follow traffic signals; when there is a traffic police officer directing traffic on-site, they should follow the traffic police officer's command; on roads without traffic signals, they should pass under the principle of ensuring safety and smoothness. Article 62 states that pedestrians should use crosswalks or pedestrian facilities when crossing intersections or roads; when crossing at a crosswalk with traffic lights, they should follow the traffic light signals; when crossing at an intersection without traffic lights or crosswalks, or when crossing a road without pedestrian facilities, they should confirm safety before crossing. Article 89 states that pedestrians, passengers, and non-motor vehicle drivers who violate road traffic safety laws and regulations regarding road passage will be given a warning or fined between 5 and 50 yuan; non-motor vehicle drivers who refuse to accept the fine may have their non-motor vehicles impounded. Driving a motor vehicle in violation of traffic light signals will result in a 6-point penalty. Right-turn precautions: Pay attention to straight-moving vehicles on the left: When turning right, you should look at both the right and left sides for vehicle conditions. Pay attention to left-turning vehicles from the opposite direction: In addition to observing straight-moving vehicles, you also need to check if there are left-turning vehicles from the opposite direction. When turning right, pay attention to vehicles on the left, whether they are turning left or going straight, and let them pass first. Pay attention to pedestrians: When turning right, in addition to the crosswalk before the intersection, there may also be a crosswalk at the corner. When turning right, pay attention to whether there are pedestrians on the crosswalk.

15

3

Share

Can a flat tire still be used after driving for two kilometers?

No, it cannot be used. A flat tire should not be driven on. Continuing to drive on a flat tire can cause the tire to be completely ruined. Below are the hazards of driving on a flat tire and the proper handling methods when a tire is flat: Hazards of driving on a flat tire: If you continue to drive on a flat tire, the tire tread will be crushed, causing fatal damage to the tire's internal structure. It can also lead to damage or deformation of the wheel rim. Additionally, the inner wall of the tire will be worn by the rim, and if used further, there is a risk of a blowout. Tire pressure is critical to a tire's lifespan—both too high and too low can shorten it. When the pressure is too low, the tire body deforms more, the sidewalls are prone to cracking, and excessive bending occurs, leading to overheating, rubber aging, fabric fatigue, and broken cords. The tire's contact area with the road increases, causing uneven wear on the tire shoulders. If the pressure is too high, the tire cords undergo excessive stretching and deformation, reducing the tire's elasticity. This increases the load on the tire while driving, and any impact can cause internal cracks or even a blowout. High pressure also accelerates wear on the tire crown, reducing its pressure resistance. Proper handling methods when a tire is flat: After a tire goes flat, find a safe place to stop, replace it with the spare tire, and test-drive it for a short distance before continuing. Finally, drive to the nearest repair shop to have the tire fixed.

7

3

Share

What Causes High Idle Speed in EFI Motorcycles?

EFI motorcycles experience high idle speed due to a malfunctioning idle control valve or an air intake system leak. Below are the detailed explanations: Malfunctioning Idle Control Valve: EFI engines rely on the idle control valve to maintain normal idle speed. A faulty idle control valve can result in excessively high idle speed. During operation, the electronic control unit (ECU) calculates and adjusts the air intake based on data received from the engine to regulate idle speed. If oil residue or carbon buildup affects the idle control valve, the ECU may fail to receive accurate data, disrupting idle speed regulation and leading to high idle speed. Air Intake System Leak: Precise control of air intake is essential for maintaining normal idle speed. When the air intake system leaks, the ECU cannot perform accurate calculations, resulting in increased air intake and consequently high idle speed.

8

3

Share

What brand is the Verna car?

Is it necessary to install a power tailgate at a 4S dealership?

Can a Flood-Damaged Car Be Identified?

How long does it take for the color to match after repainting a white car?

Can you turn right at a red light when driving a motor vehicle?

Can a flat tire still be used after driving for two kilometers?

What Causes High Idle Speed in EFI Motorcycles?

What is the process for renewing a driver's license after its expiration date?

Can I skip the theoretical class after making an appointment?

Which side is the steering wheel on in French cars?

What procedures are required for filling a fuel canister?