What brand is the Venucia fuel pump?

How to Perform Remote Start on the Geely Binyue Car?

When the car is locked, within 50 meters, press the lock button, then hold the start button (long press the circular button) within two seconds to start. The engine remote start has the following features: 1. High reliability: The engine remote start is structurally identical to manual ignition inside the car, using an electric motor to start the engine. 2. Convenience: The remote control range is typically no less than 50 meters, allowing you to remotely start the engine from home or work when the car is parked on the ground. 3. Automatic timing: If no operation is performed within a certain period after remote starting, the engine will automatically shut off. 4. Whole-car heating: Parking heating warms up the coolant in the radiator, effectively heating the cabin, engine, or windows.

2

0

Share

How to resolve the P with a slash fault light?

The P with a slash fault light indicates a malfunction in the electronic parking brake, which requires a reset of the electronic parking system. The reset steps are as follows: 1. Start the car and press the foot brake. 2. Press down the electronic handbrake for 5 seconds. 3. Pull up the electronic handbrake for 5 seconds. The operation sequence for the parking brake is as follows: 1. Engage the parking brake. 2. For manual transmission cars, place the gear lever in the 1st or 'R' position; for automatic transmission cars, place the gear lever in the 'P' position. 3. Turn off the engine, exit the vehicle, and place wheel chocks under the wheels.

3

2

Share

How to Reset the Maintenance Light on Hyundai Elantra?

Method to clear the maintenance light on Hyundai Elantra: 1. Turn on the vehicle's power. 2. Use the steering wheel control buttons to navigate to the "Maintenance" page on the dashboard. 3. Then select the "Reset" option to zero the maintenance mileage. 4. Turn off the ignition switch to complete the reset. Below are the methods to clear the maintenance light for other Hyundai models: 1. Turn on the vehicle's power. 2. Use the control buttons on the steering wheel to bring up the "Maintenance" menu interface on the trip computer. When the vehicle reaches the maintenance period, the display will show a "Service Required" message. 3. Finally, press and hold the "OK" button on the steering wheel to clear the maintenance light.

17

2

Share

Why Shouldn't You Coast in Neutral When Driving Downhill?

Driving downhill in neutral is not recommended for the following specific reasons: 1. When coasting in neutral, the car loses the engine's braking effect. During descent, due to gravity, the vehicle's speed will increase continuously. Without the engine's braking force, the braking distance increases significantly, meaning the effectiveness of braking is greatly reduced, putting the vehicle in an uncontrolled state. If an obstacle appears ahead, the driver may be unable to slow down or stop the vehicle in time, creating a major safety hazard. 2. The likelihood of the car stalling increases when coasting in neutral. If the car stalls for any reason, it will immediately lose power steering and brake assist, resulting in complete loss of control. The consequences in such a situation are unimaginable. 3. For automatic transmission vehicles, coasting in neutral can cause the transmission to lose lubrication, increasing wear and tear on the transmission system.

15

3

Share

Steps for Checking Automotive Air Conditioning Pressure

Steps for checking automotive air conditioning pressure are as follows: 1. Before inspection, check and clean the inspection connector of the air conditioning system and the high and low pressure connection connectors on the air conditioning pressure gauge; 2. Check the air conditioning pressure gauge to ensure that both the high and low pressure valves are properly closed and all connection connectors are securely fastened; 3. Connect the high and low pressure hoses of the air conditioning pressure gauge to the high and low pressure service diagnostic connectors via quick connectors, ensuring the air conditioning is turned off during connection; 4. After connection, turn on the air conditioning, read the high and low pressure values, and record them; 5. After inspection, first turn off the air conditioning and the engine, then disconnect the air conditioning pressure gauge from the service diagnostic connectors; 6. After disconnection, also check the service diagnostic connectors on the automotive air conditioning refrigeration system for any signs of leakage.

17

2

Share

Is the Prado a Full-Time Four-Wheel Drive?

The Prado is a full-time four-wheel drive, a mid-to-large SUV under FAW Toyota. Its body dimensions are: length 5010 mm, width 1885 mm, height 1890 mm, wheelbase 2790 mm, ground clearance 215 mm, and fuel tank capacity 87 liters. The Prado is equipped with a 3.5L naturally aspirated V6 engine, with a maximum horsepower of 280 hp, maximum power of 206 kW, maximum power speed of 6000 rpm, maximum torque of 365 Nm, maximum torque speed of 4500 rpm, and is paired with a 6-speed automatic transmission.

20

3

Share

What brand is the Venucia fuel pump?

How to Perform Remote Start on the Geely Binyue Car?

How to resolve the P with a slash fault light?

How to Reset the Maintenance Light on Hyundai Elantra?

Why Shouldn't You Coast in Neutral When Driving Downhill?

Steps for Checking Automotive Air Conditioning Pressure

Is the Prado a Full-Time Four-Wheel Drive?

How to Reset the Maintenance Light on a Car?

Regal 5w30 or 5w40?

What does it mean when the EPC light is on in the car?

What Does Engine Knocking Sound Like?