···
Log in / Register

What brand is the transmission of the new Regal?

4 Answers
GideonLynn
09/04/25 7:09am
The new Regal is equipped with a 6T40E transmission, which is produced by General Motors. The new Regal uses a 9-speed automatic manual transmission. The automatic manual transmission has eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT transmission with added manual shifting functionality. The purpose of an automatic manual transmission is to enhance the driving pleasure of automatic vehicles. When using the new Regal's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long periods. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause the transmission to overheat and produce a jolt when shifting back into D gear. Never shift into D/R gear before the vehicle comes to a complete stop. Many drivers, to showcase smooth operation, shift into reverse gear before the vehicle stops completely. This can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in D gear. On steep slopes, automatic transmission vehicles often overheat due to high load or struggle with climbing power due to premature upshifting. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move the vehicle onto the tow platform while it is in N gear. Do not use tow ropes or tow the vehicle directly.
Was this review help?
6
1
Share
StKimberly
09/16/25 8:00am
I've driven the new Regal for several years, equipped with the Aisin Seiki-supplied 9-speed automatic transmission specifically tuned by GM for Buick. The gear shifts are exceptionally smooth with no noticeable jerkiness. This transmission responds quickly, making low-speed hill climbs effortless while maintaining fuel efficiency during highway cruising, with lower noise levels compared to other brands. Aisin is a Toyota Group company, and GM has a long-standing partnership with them, ensuring reliability. Remember to change the transmission fluid regularly—every 60,000 kilometers to extend its lifespan. Don't wait until unusual noises occur before servicing. Overall, this transmission pairs well with either the 1.5T or 2.0T engine, significantly enhancing driving pleasure.
Was this review help?
16
0
Share
Expand All
DelPenelope
10/30/25 8:33am
My family just switched to this car, and the new Regal's transmission is from Aisin, which feels quite comfortable to use. It starts smoothly without the sudden jerkiness of some cars, and handles gear shifts steadily even in city traffic. The acceleration response is quick, downshifting instantly for overtaking, with almost no noticeable shudder. Aisin has a good reputation in the industry, and GM has trusted them as a supplier for years. Maintenance costs are reasonable, and oil changes are straightforward. I recommend new buyers pay attention to this detail and try different driving modes when choosing a car—sport mode offers more power while maintaining reasonable fuel efficiency, making it a reference for both Japanese and American brands. It's worry-free even after long-term use, and comfortable for long-distance trips.
Was this review help?
9
3
Share
Expand All
Paisley
12/13/25 8:41am
I've been repairing cars for over a decade. Most of the transmissions in the new Regal are manufactured by Aisin and directly installed by GM. This design is durable, and you generally won't encounter issues for ten years with normal driving, but regular maintenance is essential—check the fluids every 50,000 kilometers. The brand's advantage lies in its reasonable structure and fewer failures, making it more robust than ZF transmissions. Occasionally, we encounter cases where owners forget to change the fluid, leading to delayed shifting, but a simple cleaning usually resolves it. Aisin's supply chain is stable, and replacement parts are affordable, saving on repair costs. Remember to avoid frequent hard acceleration to protect the gears and extend their lifespan, making it ideal for daily commuting.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Is Pre-check Necessary for One-Button Start?

One-button start vehicles do require a pre-check. The steps for starting a car with one-button start are as follows: 1. After the driver sits in the driver's seat, press the start button once to turn on the ACC light, then press it again to initiate the vehicle's self-check. 2. Depress the brake pedal and press the one-button start key to ignite the engine. 3. Release the foot brake; you may choose to warm up the engine (the warm-up time depends on the vehicle model and ambient temperature, but avoid sudden acceleration and braking in low-temperature conditions). 4. Depress the foot brake again, shift to D gear, and release the handbrake (for electronic handbrakes, simply press the button briefly). 5. Slowly release the foot brake, gently press the accelerator, and complete the starting process.
14
4
Share

Why is the car's one-button start not responding?

Car's one-button start not responding reasons are: 1. Poor internal contact of the one-button start button or poor contact of the button plug, resulting in the inability to start the vehicle normally; 2. Starter issues, such as open circuit of the starter electromagnetic clutch or poor contact of the starting circuit, can cause the vehicle to fail to start normally; 3. Poor contact between the body and engine ground wire, or open circuit of the ground wire, leading to the inability to start the vehicle; 4. Damage to the engine speed sensor causing the vehicle to fail to start; 5. Damage to the low-pressure fuel pump, preventing the supply of fuel to the vehicle; 6. Battery depletion, resulting in the inability to start the vehicle; 7. Smart remote key battery dead, unable to open the car door, leading to the inability to start the vehicle.
15
0
Share

Does the Mitsubishi ASX comply with China VI emission standards?

Among the currently available models of the Mitsubishi ASX, only those meeting China V emission standards are offered, with no models compliant with China VI standards. The China V emission standard is equivalent to the Euro 5 standard currently in effect in Europe, imposing stricter limits on vehicle pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China I to China IV has reduced per-vehicle pollution by 30% to 50%. The Mitsubishi ASX measures 4366mm in length, 1780mm in width, and 1640mm in height, with a wheelbase of 2670mm. It is a 5-door, 5-seater SUV equipped with a 5-speed manual transmission.
14
3
Share

How to Open the Engine Protective Cover?

To open the engine protective cover, follow these steps: 1. First, open the car door, sit in the driver's seat, and locate the engine switch lever on the left side of the driver's seat. 2. Pull the engine lever by hand until you hear a 'click' sound. 3. Check if the car engine hood has been opened. If there is a noticeable gap, it indicates that the engine hood has been successfully opened. 4. Pull the safety latch. To fully open the hood, you must first pull the safety latch. 5. Prop up the front engine cover. Pull the support rod and secure its top hook into the engine hood. After ensuring the engine hood is properly supported, you can proceed with other operations on the engine.
12
0
Share

What is Downshifting for Deceleration?

Downshifting for deceleration refers to quickly shifting from a high gear to a low gear when descending a long and steep slope, utilizing the engine braking effect of the lower gear. This method is typically employed in emergency situations such as tire blowouts or brake failure. During normal downhill driving, it is recommended to downshift in advance and achieve gradual downshifting to protect engine and transmission components. Methods for downshifting to decelerate during brake failure: 1. Manual transmission: Press the accelerator deeply to increase engine speed, downshift, press the accelerator again, then downshift further, gradually moving to lower gears; 2. Automatic transmission: Shift the gear to L or S position to maximize the engine braking effect. For dual-clutch transmissions, manual mode is generally provided, and the operation can follow the requirements for manual transmission vehicles.
8
2
Share

Why does the steering wheel suddenly become heavy?

Suddenly heavy steering wheel is caused by low tire pressure or a problem with the power steering system. You should stop and check the tire pressure. If the tire pressure is normal, it indicates a failure in the power steering system, and you should immediately go to a professional repair shop for maintenance. Cars are equipped with power steering systems, and there are three common types: mechanical hydraulic power steering system, electro-hydraulic power steering system, and electric power steering system. Both the electro-hydraulic power steering system and the mechanical hydraulic power steering system have a power steering pump and hydraulic mechanism, and both systems require the use of power steering fluid.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.