What brand is the transmission of the Mazda CX4?

1 Answers
VanDamian
07/29/25 8:24pm
The transmission of the Mazda CX4 is a 6AT transmission from the Skyactiv brand. It features a multi-plate lock-up clutch, a torsional damper with improved damping performance, and a more compact torque converter, which increases the lock-up range of the torque converter, enhances the transmission efficiency, and reduces fuel consumption. The new Mazda CX4 adopts the family design language, with a large-area front grille, flatter and sharper headlights, and more prominent chrome trim, giving the car a more contemporary look. In terms of configuration, depending on the version, the new car is equipped with matrix ALH adaptive LED headlights, BOSE audio, and a new 8-inch central control display.
Was this review help?
16
5
Share
More Forum Discussions

What is the refrigerant charging amount for the Buick GL8?

The Buick GL8 requires 1100g of refrigerant. Precautions for adding refrigerant to the air conditioning system include: 1. Sequence: First add from the high-pressure line, then from the low-pressure line. When adding from the high-pressure line, the compressor must not be running. When adding from the low-pressure line, the air conditioning system must be under maximum load. 2. Pressure gauge correspondence: Check the pressure gauge corresponding to the line being used. The low pressure is generally above 0.2 MPa, and the high pressure is generally above 1.2 MPa. 3. Charging amount: Typically, two to three cans are added, with each can containing 300g. The exact amount should be determined according to the specific vehicle's user manual. Adding too much will increase pressure, while adding too little will result in poor cooling performance.
13
4
Share

What are the functions of the buttons on the 11th-generation Civic?

The 11th-generation Civic features buttons such as CANCEL, SET, the +/- symbols on the right side of the steering wheel, RES, MAIN, distance adjustment, and lane keeping. Below are the detailed introductions: Introduction to the functions of each button: The CANCEL button is used to deactivate cruise control, the RES button resumes cruise control, and the MAIN button turns off cruise control. The SET button sets the cruising speed, and this button should be used to set the speed before activating cruise control (Note: The cruise control function can only be used at speeds above 30km/h). The +/- buttons on the right side of the steering wheel control the cruise control speed, with the '+' increasing speed and the '-' decreasing it. The distance adjustment function automatically detects the distance to the vehicle ahead and will slow down or brake if the leading vehicle brakes. Lane keeping is an auxiliary system for cruise control; when the vehicle approaches a lane line, it will alert the driver through steering wheel vibrations or alarms.
10
1
Share

Consequences of Leaving Car Doors Unlocked Overnight?

It can drain the battery, and in severe cases, may cause the car to run out of power and fail to start. 1. Power Disconnection: When you remove the key or lock the car doors, not all of the car's power is disconnected. For example, the car's anti-theft alarm is still operational. 2. Electrical Appliance Consumption: After you leave the vehicle, many sensors remain active, consuming a certain amount of power. The possibility of the car running out of power after just one day of forgetting to lock the doors is not very high. However, if your car does not require inserting a key, when you open the door, some electrical appliances will activate, such as the reading light or the door-not-closed-tight alarm. These appliances might drain your car's battery overnight.
14
4
Share

Where is the engine number stamped on the Buick Excelle?

The engine number stamp on the Buick Excelle is located on the side of the engine block. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle license displays the engine number, usually located on the second last line; The motor vehicle registration certificate records the engine number; The purchase invoice records the engine number; The vehicle purchase tax payment certificate records the engine number. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, where each engine can only have one engine number and each engine's number is unique.
10
4
Share

What are the impacts of not washing your car after snow?

The primary harm of not washing your car after snow is damage to the paint and chassis, as snow contains corrosive elements. If the paint and chassis are covered by snow for a long time, it can lead to corrosion of the car body paint and chassis. This is why many car owners notice their car's paint losing its shine after snowfall. It is essential to promptly remove snow from the car body after snowfall. If snow on the license plate is not cleared in time, it may be considered as obstructing the license plate, which is a violation and could result in a 12-point penalty. Therefore, always remember to clean the snow off your license plate after snow. The next step is to clear snow or muddy water from the car lights, as these obstructions can directly affect the car's lighting or warning signals, compromising driving safety. Additionally, the muddy water on roads after snow contains salt and various alkaline substances. If these adhere to the car body, tires, rims, or chassis and are not washed off promptly, prolonged exposure to snow can cause severe corrosion to the car paint and chassis.
4
2
Share

How to read 2.5 on a car air pump?

Look at the black numbers, usually it's 2.5 bar. 1. Power supply from the car: Generally, car air pumps draw power from the car's 12V cigarette lighter socket, but some car air pumps can also draw power from the battery. 2. Connect to the tire valve: Generally, the connection between the car air pump and the tire valve is threaded, which can greatly avoid air leakage at the valve connection. 3. Set the inflation tire pressure: Preset the inflation tire pressure on the tire pressure setting panel of the car air pump (there is a display on the setting panel, which can show the preset tire pressure value and the real-time tire pressure during inflation). 4. Start inflation: Press the inflation start button, and the car air pump will start inflating the tire. When the preset tire pressure is reached, the car air pump will automatically stop.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.