What brand is the transmission of the Lynk & Co 01?

1 Answers
Stacy
07/30/25 5:22am
The Lynk & Co 01 is equipped with the Aisin third-generation AT transmission, which delivers responsive power and smooth low-speed crawling without jerking or shaking. Advantages of the AT transmission: 1. Excellent smoothness – The torque converter can automatically and continuously adjust the torque ratio and transmission ratio within a certain range, though the torque multiplication factor is not large and the speed range is not wide. During vehicle start-up or when driving on poor road surfaces, the lock-up clutch is disengaged to allow the torque converter to function, fully leveraging the hydraulic transmission's ability to automatically adapt to drastic changes in driving resistance. This improves the vehicle's driving smoothness. 2. Wide applicability and mature technology. The AT transmission has a broad torque transmission range.
Was this review help?
2
2
Share
More Forum Discussions

What Causes Severe Body Vibration When the Speed Exceeds 100 km/h?

It is quite common for the steering wheel to vibrate when the car is idling. Some car owners experience intense steering wheel vibration when driving at high speeds, especially when the speed reaches 80-100 km/h or above. This situation is mostly caused by issues with the car tires. If the mass distribution of the tire is uneven, it can lead to dynamic imbalance when the wheel rotates at high speeds, resulting in severe steering wheel vibration during driving. Here is some additional information: Replacing the brake pads—usually, replacing the brake discs and brake pads can resolve the symptoms. If the steering wheel vibrates even at low speeds, it might be due to the mechanical steering system, such as a loose steering belt causing slippage, which can also lead to steering wheel vibration. Additionally, looseness or excessive gaps in the steering linkage system can cause vibration and abnormal noises, though this is relatively rare.
19
3
Share

What Are the Reasons for No Sound in Car Audio?

Accidental muting, infotainment screen freezing, audio wiring issues, or audio system malfunctions can all cause no sound in car audio, and each of these issues needs to be checked one by one. Most modern vehicles have a mute button on the multifunction steering wheel, which drivers might accidentally press. Adjusting the volume can help determine if this is the case. If the infotainment screen freezes or becomes unresponsive, it may also cause the audio to stop working. Drivers can try restarting the infotainment screen or turning the vehicle off and on again to see if the audio returns to normal. Faulty audio wiring can also lead to no sound. It's necessary to inspect the wiring for short circuits, breaks, or loose connections. Additionally, check the vehicle's fuse box to see if any fuses are blown. Wiring inspections are complex and often require specialized tools, so it's best to seek professional repair services. Car audio systems mainly consist of the head unit, speakers, and amplifier. Among these, speakers and wiring are more prone to failure. The condition of the wiring affects signal or power transmission, which can lead to poor speaker performance. Car speakers are generally categorized into coaxial and component speakers. If speakers fail, they usually need to be replaced rather than repaired.
2
0
Share

Where Can I Buy a Harley?

You can purchase a Harley at the nearest authorized Harley-Davidson dealership. Here are some details about Harley-Davidson: 1. Appearance: The essence of Harley-Davidson lies in mounting the engine on rigid mounts, providing the smoothest ride while maintaining a rugged rear-end design. 2. Performance: Powered by the Twin-Cam 88B engine. The simplified hardtail look, dual staggered exhaust pipes, and the 1340cc Evolution® engine combine traditional aesthetics with innovative design. Harley-Davidson maintained its leading position throughout the 1980s.
13
3
Share

Will Engine Oil Burning Cause a Car to Be Scrapped?

Engine oil burning can lead to a car being scrapped. Burning engine oil results in increased carbon deposits in the combustion chamber, unstable idling, sluggish acceleration, and excessive exhaust emissions. In severe cases, it can cause insufficient engine lubrication, leading to irreparable damage or even scrapping of the engine. Cold Engine Oil Burning: Park the vehicle overnight and observe the exhaust emissions during the first start in the morning. If the exhaust emits thick blue smoke, it indicates the vehicle is burning engine oil. If the blue smoke disappears after the engine warms up, this type of oil burning is classified as cold engine oil burning. Constant Oil Burning: If blue smoke is visible immediately upon starting, the engine oil burning is already quite severe and may even pose safety hazards. Acceleration-Induced Oil Burning: After the engine is warmed up, whether during rapid acceleration or idling, if blue smoke is emitted from the exhaust pipe whenever the RPM rises sharply, it indicates the vehicle is burning engine oil. Solutions for Engine Oil Burning: Promptly replace the valve stem seals to ensure proper valve sealing; regularly clean carbon deposits from the piston rings or replace the piston rings entirely; and adopt moderate driving habits in daily use to avoid overly aggressive driving.
11
4
Share

How Long After Passing Subject Three Can You Take Subject Four?

After passing Subject Three, there are the following situations for taking Subject Four: In some cities, you can register for the Subject Four exam on the same day you pass Subject Three. In most cities, after passing the Subject Three exam, you need to make an online appointment. You can schedule the Subject Four exam one week after passing Subject Three. There is no time limit for the Subject Four exam. However, you must pass Subject Four within three years after passing Subject One; otherwise, your previous exam results will become invalid. Subject Four, also known as the Subject Four theoretical exam or driver theory exam, is part of the motor vehicle driver's license assessment. It includes requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident procedures. Subject Four Exam Notes: Exam Duration: The exam lasts 30 minutes. If you make 12 mistakes (6 questions) during the exam, the session will be terminated. Number of Questions: Depending on the type of driver's license, 50 questions are randomly selected from the corresponding Subject Four question bank. For car licenses, questions are drawn from a pool of 800, while for large vehicle licenses, they come from a pool of 1,023. Each question is worth 2 points. Question Types: The exam includes single-choice questions (including true/false questions) and multiple-choice questions. The first 45 questions are single-choice, and the last 5 are multiple-choice. The exam also features animated questions, picture-based questions, scenario identification questions, and text-based questions. Retake Notes: If you fail Subject Four, you only need to retake Subject Four. The driving school will schedule the retake, and there is no limit to the number of retakes. You can retake the exam until you pass, and no additional fees are required for Subject Four retakes. Subject Four Exam Tips: Strengthen Weak Areas and Identify Mistakes: For marked questions, don't just memorize the correct answer. Refer to regulations, textbooks, or reference materials to understand the reasons behind the mistakes and internalize them. Categorize and Summarize Questions: Use the question bank analysis to group similar questions. Many questions in the bank are similar and can be confusing, so it's helpful to analyze them together. For example, traffic signs for walking, hiking, pedestrian crossings, and pedestrian warnings look similar and can be easily mixed up. Grouping them during study reduces errors. Use Memory Techniques: Many questions involve numbers. Summarizing these numbers can make them easier to remember. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject Three is divided into two parts. Subject Four is the colloquial term for the Subject Three Safe and Civilized Driving Knowledge Exam and is not a separate subject. Subject One refers to the road traffic safety laws, regulations, and related knowledge exam. Subject Two refers to the field driving skills exam. Subject Three refers to the road driving skills and safe and civilized driving knowledge exam. The safe and civilized driving knowledge exam is conducted after Subject Three.
12
1
Share

Should You Use Second or Third Gear in Subject Three?

Subject Three exam uses second gear. Below are the specific details of Subject Three: 1. Exam Items: The exam items for Subject Three include vehicle preparation, starting, straight-line driving, gear shifting operations, lane changing, pulling over, passing intersections, left turns at intersections, right turns at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. 2. Retake Instructions: The road driving skills test for Subject Three allows five opportunities to schedule the exam. After scheduling, you can take the exam once and retake it once. If you do not attend the retake or fail the retake, you must reschedule the exam.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.