What brand is the transmission of the Hyundai ix25?

2 Answers
Harmony
07/24/25 2:14am
The transmission used in the Hyundai ix25 is produced by Mobis Parts, a subsidiary of the Hyundai Motor Group. As one of the three main pillars of the Hyundai-Kia Automotive Group, Hyundai Mobis is ranked among the world's top eight automotive parts suppliers and was also listed among the Fortune Global 500 in 2012. The Hyundai ix25 transmission utilizes a 6-speed manual transmission and a continuously variable transmission (CVT). The 6-speed manual transmission includes six forward gears and one reverse gear. The CVT does not have specific fixed gears; it operates similarly to an automatic transmission but differs in the way it changes gear ratios—instead of shifting between discrete gears, it provides a continuous range of ratios, resulting in smooth and uninterrupted power delivery. When using the Hyundai ix25's transmission in daily driving, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged intervals between fluid changes can lead to damage to internal components such as bearings and the transmission housing. Avoid coasting in neutral for long durations. While many experienced drivers of manual transmission vehicles may coast in neutral, doing so in an automatic transmission vehicle can cause overheating and create a noticeable jolt when shifting back into Drive (D). Never engage Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers attempt to showcase "smooth" operation by shifting into reverse while the vehicle is still moving, but this can cause significant damage to the transmission gears and may eventually lead to gear grinding or other failures. Avoid frequently climbing steep slopes in Drive (D). When tackling steep inclines, automatic transmission vehicles may overheat due to high load or prematurely upshift, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to Sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to transport it while the vehicle is in Neutral (N). Never use a tow rope or directly tow the vehicle, as this can cause severe damage to the transmission.
Was this review help?
18
1
Share
ChaseLynn
08/10/25 9:52pm
I'm an experienced driver with decades behind the wheel and quite familiar with the Hyundai ix25. Its transmissions are mainly Hyundai's own brands, like Powertech or some collaborative models, depending on the year and configuration. The standard versions mostly use a 6-speed automatic transmission, while high-performance models might come with a 7-speed dual-clutch transmission, all developed or assembled by Hyundai themselves. The transmission is the heart of a car, affecting driving smoothness and fuel consumption, and Hyundai's system in the ix25 is quite reliable with decent fuel efficiency. It's recommended to change the transmission fluid regularly, around every 60,000 kilometers, to extend its lifespan. In short, if you feel any gear-shifting issues in your ix25, don't panic—first check if it's time for an oil change. The brand's overall reputation is good, so there's no need to worry too much about failures.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Which Brand Does Bestune Belong To?

Bestune, produced by FAW (First Automobile Works) of China, features a robust and steady design with powerful performance, making it an outstanding business sedan of superior quality. Below is relevant information about Bestune: 1. "Bestune" is the culmination of FAW Group's 50-year history in automobile manufacturing and 15 years of open cooperation experience. It incorporates advanced styling concepts, body design, active and passive safety technologies, interior module development, NVH improvements, and other cutting-edge technologies, representing the crystallization of integrated innovation and a high-standard, high-quality, high-performance domestic brand. It not only carries the attention and pride of the Chinese people but also signifies a substantial leap in China's automotive industry technology and quality. 2. As a brand under FAW Car, standing alongside "Hongqi" (Red Flag), Bestune made its debut on May 18, 2006. Bestune places great emphasis on its quality and is committed to designing and producing products that best meet user needs. Currently, Bestune uses "B" as its product series identifier, categorizing its models into specific series from small to large, such as the 3 Series, 5 Series, 7 Series, and 9 Series, with the digit "0" indicating the number of facelifts, resulting in final names like "Bestune B50," "Bestune B70," and "Bestune B90."
12
5
Share

How to Fix P0304 Misfire?

p0304 This diagnostic monitors the duration of the power stroke and compares this duration with other cylinders by analyzing the speed signal. Eliminate possible faults that may cause stalling; check the fuel system; check the ignition device; check the intake system; test cylinder pressure; check the crankcase ventilation; check the intake pipe. More details are as follows: 1. The engine control module uses the information from the crankshaft position sensor to determine when an engine misfire occurs and uses the information from the camshaft position sensor to determine which cylinder is misfiring. 2. The engine control module can detect each misfire by monitoring the changes in the crankshaft speed of each cylinder. If the engine control module detects a misfire rate sufficient to cause emission levels to exceed legal standards, it sets the fault code P0300. 3. Under certain driving conditions, an excessively high misfire rate can cause the three-way catalytic converter to overheat, potentially damaging the converter. When the converter overheats, malfunctions, and sets the fault code P0300, the malfunction indicator light will flash. 4. For a 4-cylinder engine, fault codes P0301 to P0304 correspond to cylinders 1 to 4; for a 6-cylinder engine, fault codes P0301 to P0306 correspond to cylinders 1 to 6; for an 8-cylinder engine, fault codes P0301 to P0308 correspond to cylinders 1 to 8; for a 12-cylinder engine, fault codes P0301 to P0312 correspond to cylinders 1 to 12. If the engine control module can determine which cylinder is misfiring, it sets the fault diagnosis code for that cylinder.
14
3
Share

Can You Make a U-Turn Without Waiting for the Red Light?

If the gap is marked with a dashed line, making a U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly as long as it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with a solid line, then making a U-turn requires crossing the pedestrian crossing and is subject to traffic signals. Note that making a U-turn on the pedestrian crossing is prohibited. Violations will result in a 3-point deduction and a fine according to Article 49 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China." When making a U-turn that requires crossing the pedestrian crossing, you must yield to pedestrians: Pedestrians walking on the right side of the road's crosswalk, not reaching the centerline of the road. Vehicles on the left side of the road should slow down and allow pedestrians to pass safely. Pedestrians waiting outside the boundary line of the motorized and non-motorized lanes. If they have not entered the roadway, vehicles should slow down and allow them to pass safely. If pedestrians cross the boundary line between the motorized and non-motorized lanes, vehicles failing to stop and yield is a violation and should be penalized. When pedestrians enter the motorized lane from the crosswalk, vehicles in the adjacent lane must slow down and allow them to pass safely. Failing to stop and yield is a violation and should be penalized. Pedestrians waiting at the centerline of the road without entering the motorized lane. Vehicles failing to stop and yield is a violation and should be penalized. Pedestrians crossing the centerline of the road into the motorized lane. Vehicles failing to stop and yield is a violation and should be penalized. If the road is divided by a green belt, pedestrians waiting in the central area must be yielded to by vehicles, which should slow down and allow safe passage. Situations where U-turns are allowed: Intersections with U-turn signs: If there is a U-turn signal, follow its instructions. If there is no signal, make a U-turn without interfering with other vehicles or pedestrians. Intersections without explicit prohibitions against U-turns or left turns: If there are no signs explicitly prohibiting U-turns, they are allowed. This means no "No U-Turn" or "No Left Turn" signs and no solid centerline. Yellow grid lines also allow U-turns: Yellow grid lines indicate no-stopping zones at intersections prone to congestion. While stopping on these lines is prohibited, U-turns are allowed unless there is a central barrier. When "No Left Turn" and "U-Turn Allowed" signs appear together: U-turns are allowed, but left turns are prohibited. Note that "No U-Turn" is not the same as "No Left Turn." Points to note when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a "No Left Turn" sign, U-turns are also prohibited, even if there is no explicit "No U-Turn" sign, as U-turns require a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not allowed. Always yield to oncoming traffic when making a U-turn. Failing to do so will make you fully liable for any accidents. Near the stop line at intersections, lanes often have guiding arrows. Not all leftmost lanes are for left turns; some may have straight arrows, which prohibit U-turns even without explicit signs.
18
3
Share

How is the toll charged when using ETC on highways?

ETC on highways is charged as follows: The use of a fully automated electronic toll collection system enables paperless and cashless management of highway tolls. Below is an introduction to ETC: 1. Definition: ETC stands for Electronic Toll Collection, which means an electronic non-stop toll collection system. 2. Function: For vehicles equipped with ETC devices, when passing through toll stations, the onboard device will identify the vehicle, write information, and automatically deduct the corresponding funds from the pre-bound IC card or bank account, achieving rapid passage. It is particularly suitable for use on highways or in busy bridge and tunnel environments.
13
1
Share

Should the car engine compartment be cleaned?

Engine compartment needs cleaning, here is the relevant information: 1. In fact, engine compartment maintenance is more important than exterior car washing, because accumulated dirt in the engine compartment will affect driving safety as the vehicle ages. Therefore, the cleanliness of the engine compartment also determines the safety level of the vehicle. 2. Dirt covering the engine surface will affect heat dissipation, leading to excessive engine compartment temperature. This not only impacts engine lifespan but also accelerates aging of internal components like wiring harnesses, creating safety hazards. 3. During vehicle use, an oily sludge forms on the engine surface, which significantly increases the probability of engine spontaneous combustion. It also makes it harder to detect surface issues with wiring harnesses.
14
1
Share

What is the actual range of the Tesla X Long Range?

Tesla Model X Long Range version has a range of 575 kilometers with an acceleration of 4.6 seconds per 100 kilometers. Here is some extended information about the Tesla X Long Range: 1. Tesla is an American electric vehicle and energy company that manufactures and sells electric cars, solar panels, and energy storage devices. 2. On July 1, 2003, the company was co-founded. The founders named the company "Tesla Automobile" in honor of physicist Nikola Tesla. In 2004, Elon Musk joined the company and led the Series A funding round.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.