What brand is the transmission of the Hyundai Elantra?

When did the Lynk & Co 03 go on sale?

Lynk & Co 03 was officially launched and went on sale on October 19, 2018. Based on the CMA modular architecture, the Lynk & Co 03 is the first sedan model introduced by the Lynk & Co brand, designed to meet the full five-star standards of C-NCAP, E-NCAP, and IIHS. Here are some additional details: 1. Exterior: The Lynk & Co 03 features a very stylish and bold design with strong sporty elements. The front fascia has an aggressive and dynamic appearance. The side profile adopts a dual waistline design that runs from the front to the rear, enhancing its sporty character. The roof is adorned with chrome accents, while the rear features a fastback-style silhouette with a floating spoiler, giving it a modern and sophisticated look. 2. Powertrain: The Lynk & Co 03 is equipped with a 1.5TD high-efficiency engine from the Drive-E series. The turbocharger engages at 1000 rpm, delivering 150 N·m of torque. At 1500 rpm, the engine reaches its peak torque of 265 N·m. With quick turbo response and excellent low-speed performance, it offers easier hill climbing and overtaking capabilities, achieving a 0-100 km/h acceleration time of just 7.9 seconds.

19

5

Share

Does it matter if I forgot to close the car window on a rainy day?

Forgetting to close the car window on a rainy day does matter. Here are the relevant details: 1. Introduction: If you forget to close the window on a rainy day, by the time you remember, the car interior might already be flooded. Items inside the car soaked by rainwater can lead to electrical issues, and vehicle repairs can be quite costly. 2. Additional Information: If a large amount of water enters the car, remember not to start the vehicle. Incorrect operation can cause secondary damage to the car. If there is a lot of water inside, the seats will definitely get wet, so any removable parts should be taken out to prevent mold and rust.

13

4

Share

At what mileage should front and rear tires be rotated?

Generally, it is recommended to rotate front and rear tires approximately every 10,000 kilometers. Below are relevant details: 1. Introduction: Regular rotation can extend tire service life by up to 20%. Front-rear tire rotation, commonly called tire swapping, is technically termed tire rotation. 2. Additional Information: During acceleration phases, vehicles with poor-quality tires may experience lateral slippage when starting with heavy throttle. Even for infrequently driven vehicles, tires should be replaced every 5 years. Worn tires with shallow tread patterns directly affect braking distance and steering efficiency! These symptoms indicate immediate tire replacement is necessary.

7

0

Share

Can I Break in the Car for 1000 Kilometers After an Overhaul?

After an overhaul, you can break in the car for 1000 kilometers. During the break-in period, the car's components can adapt to the environment better, and any protrusions on the parts can be worn down. Here are some precautions for breaking in a car after an overhaul: Avoid high speeds: The overhauled engine will have speed limits, so try to keep it below 80 kilometers per hour. Avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. Avoid emergency braking within the first 300 kilometers after the overhaul. Pay attention to oil maintenance: Use high-quality, high-cleanliness engine oil that meets or exceeds the manufacturer's specifications. Avoid oils with wear-resistant additives or other additives to prevent further damage to the engine. Check the coolant: After an engine overhaul, regularly check the coolant level. Insufficient coolant can cause the engine to overheat and wear out. Warm up before starting: Warming up the engine before driving allows sufficient lubrication time, especially for turbocharged models. Ensure the engine is warmed up for at least one minute before driving.

6

4

Share

Is stopping early when the fixed point exceeds 50 cm?

Both stopping too early or too late may result in the fixed point exceeding 50 cm, which leads to immediate failure and requires retaking the test. Scoring criteria: After the vehicle stops, if the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line and exceeds 50 cm forward or backward, it is considered a failure. If the front bumper of the car or the front axle of the motorcycle is not aligned with the pole line but does not exceed 50 cm forward or backward, 10 points will be deducted (originally 20 points). Notes: Accurately estimate the target, using the parking pole and a specific point on the windshield (or engine hood) (this point should be determined during practice as it varies by vehicle model and driver height). When the specific point on the windshield aligns with the parking pole in a straight line, meaning the vehicle's bumper aligns with the parking pole line, stop immediately.

3

4

Share

What are the function keys of the Mercedes-Benz C260L?

The following is a related introduction to the function keys of the Mercedes-Benz C260L: 1. Electronic Stability Program (ESP): The system is enabled by default. Unless driving on slippery roads such as during rain or snow, it is generally not recommended to turn it off. 2. Parking Radar/Image: This button activates the panoramic image and radar functions, providing the driver with alerts and visual feedback to detect surrounding obstacles. 3. Internal/External Air Circulation: The difference between internal and external circulation is that internal circulation continuously supplies air from inside the vehicle, while external circulation allows outside air to enter and replace the existing air inside the car. During traffic jams, in tunnels, or when the outside air quality does not meet standards, internal circulation should be prioritized. However, when using internal circulation for an extended period, it should not exceed one hour before switching to external circulation to prevent health impacts from poor air quality (except in extremely poor external environments). 4. Temperature Zone Synchronization: When the temperature zone synchronization function is enabled, changing the temperature in the driver's seat will synchronize the changes in the other temperature zones. Additionally, when this function is turned off, each zone can be adjusted individually for a more personalized experience. 5. Auto Start-Stop: The main function is to temporarily shut off the engine. When the driver releases the brake pedal, the vehicle will continue moving.

13

4

Share

What brand is the transmission of the Hyundai Elantra?

When did the Lynk & Co 03 go on sale?

Does it matter if I forgot to close the car window on a rainy day?

At what mileage should front and rear tires be rotated?

Can I Break in the Car for 1000 Kilometers After an Overhaul?

Is stopping early when the fixed point exceeds 50 cm?

What are the function keys of the Mercedes-Benz C260L?

Which One to Choose: Jog or Cygnus?

Where is the Passat air conditioning cooling button located?

Do express delivery trucks operate at night?

How to Use Mercedes-Benz Auto-DVR?