What brand is the transmission of the Huansu S7?

1 Answers
McAnastasia
07/29/25 11:33am
The transmission brand of the BAIC Huansu S7 is Shengrui, equipped with an 8-speed automatic manual transmission (8AT), which is a domestic brand. Although it may lack some technological highlights compared to some foreign transmissions, its compact size and low cost have made it popular among Chinese brands such as Landwind and Zotye. Here is a brief introduction to the transmission: (1) A transmission is a device that changes the operating speed of a car, consisting of many gears of different diameters. (2) The transmission is mainly used to adjust the torque and speed of the engine crankshaft to meet the different requirements of traction and speed for the driving wheels under various driving conditions such as starting, accelerating, driving, and overcoming various road obstacles.
Was this review help?
3
0
Share
More Forum Discussions

What Causes Engine Shaking After Cylinder Head Assembly Replacement?

The causes of car accelerator pedal shaking include engine misfire, dirty engine throttle, and aging rubber components inside the mounts. Below are the specific reasons for car accelerator pedal shaking: Engine Misfire: This may be due to an engine misfire fault, causing one or more cylinders to stop working, resulting in severe engine shaking transmitted to the accelerator pedal. Common fault points for misfires include: faulty spark plugs, malfunctioning ignition modules, or poor fuel quality. Dirty Engine Throttle: It could be caused by a dirty engine throttle, leading to engine shaking. It is recommended to inspect the throttle and clean it if excessively dirty. Aging Rubber Components Inside Mounts: The shaking may be due to aging rubber components inside the engine and transmission mounts, which can no longer absorb the vibrations generated during engine operation, causing the shaking to be transmitted to the accelerator pedal.
13
3
Share

Do I need to go to the local DMV to sell a car?

Selling a car and transferring ownership must be processed at the DMV in the city where the vehicle's license plate is registered. Documents required for selling a car: Vehicle Registration Certificate: The vehicle must be within the valid inspection period, and the registration certificate must have proof of the valid inspection. Vehicle Title (Registration Certificate): If the vehicle title is missing, it must be reissued before the transfer can proceed. Proof of Vehicle Purchase Tax: Generally, legally traded vehicles have this document, but special cases like "black plate" vehicles, smuggled cars, or confiscated vehicles lack this proof. The purchase tax must be paid, and the proof must be issued before the transfer. Invoice for the Vehicle: The original purchase invoice or the last transfer receipt is required. If the seller loses it, an individual can write and sign a statement, while a company must affix its financial seal on the statement. Identity Proof: The original ID of the vehicle owner is needed. For company-owned vehicles, the company seal and organization code certificate are required. If the company has changed its name or gone out of business, a proof from the industrial and commercial department is necessary.
7
0
Share

What Size of Car Cleaning Cloth is Suitable?

Fogging on the windshield when using the heater is mainly caused by the temperature difference between the inside and outside of the car. Due to the warm interior and cold exterior, water vapor condenses on the cold glass, forming fog in a short time. Wiping with a cloth: This method is simple and easy, but the effect is short-lived, as the glass quickly becomes foggy again. Additionally, wiping the windshield while driving is not very practical, as it can seriously interfere with normal driving and may even pose a danger. Using hot air to defog: However, this method should not be used while driving. It is best to stop the car and use the heater to blow hot air directly onto the glass. Initially, the fog may increase, but after a few minutes, the moisture inside the car will dry out, preventing recurring fogging. Homemade defogging solution: You can easily make your own 'anti-fog solution' by mixing dish soap and water in a ratio of 1:10. Then, use a clean, soft cloth to dip into the solution and apply it to the inside of the front and rear windshields. This method is both simple and cost-effective.
5
5
Share

What is the difference between external and internal tire repair?

Automotive tire repair methods include: traditional plug method (external repair), patch repair method (internal repair), and mushroom plug repair (internal repair). Traditional plug method: This is a relatively primitive method. The principle involves using a sharp tool like an awl to enlarge the puncture hole, then inserting a rubber strip coated with adhesive into the hole. Patch repair method: This is the most common method, used by the majority of tire repair shops. Mushroom plug repair: The mushroom plug is currently the most advanced tire repair method. Compared to other tire repair methods, it is safer, more thorough, and more stable, but it also comes at a higher cost.
1
1
Share

What Causes the Rattling Noise in the Trunk Rod?

The trunk rod malfunction requires checking for loose tail lock components or loose connections at the chassis. Inspecting trunk issues: Check if there are any obstructions in the trunk. This vehicle's trunk is divided into two sections—if the lower part isn't fully closed, the upper part won't close properly either. Next, inspect the sensors, and finally, check the car key for any error codes. Trunk features: It comes with a highly practical power trunk function, allowing the trunk to be opened and closed via an interior switch or the vehicle key. The hands-free trunk feature adds convenience, especially when loading items into the car. The power trunk with position memory is particularly beneficial for shorter individuals, eliminating the struggle of reaching the trunk lid. Additionally, the power trunk and its memory function are standard across all trims of this model.
2
2
Share

What does the ABS warning light in a car mean?

When the ABS warning light appears on your car's dashboard, it indicates a malfunction in the Anti-lock Braking System. If the wheels lock during emergency braking, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. The ABS light can illuminate in various states, each with different causes and solutions: State 1: ABS light stays on constantly (most common). Cause 1: The ABS speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect speed signals. This prevents the ABS computer from determining the vehicle's speed or wheel slip rate, thus failing to issue appropriate braking commands. Solution: Clean the contaminants from the speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Loose connections in the system wiring or poor contact in the ABS relay leads to signal issues. Solution: Check all wiring connections and re-secure any loose connections. State 2: ABS warning light intermittently illuminates, turning off during acceleration. Cause: When multiple electrical components are in use, battery voltage may drop below 10.5V. The light turns off as engine speed increases and voltage rises. This may also indicate insufficient power supply to the ABS system due to poor connections. Solution: Check battery specific gravity; inspect the charging system; examine power supply connections (including voltage relay or poor power contacts). State 3: ABS warning light remains on after engine start, only turning off when engine is shut down (IGFF). Cause: Poor grounding connection of ABS hydraulic valve body; faulty wiring connections at the hydraulic valve body; ABS computer malfunction. Solution: Loosen and retighten the hydraulic valve body ground screw, cleaning contact surfaces if necessary; check for enlarged connector gaps; replace ABS or ABS/ASR computer if needed. State 4: ABS warning light illuminates during high-speed driving. Cause: ABS computer detects significant speed difference between front and rear wheels; incorrect tire or wheel rim specifications. Solution: Verify correct tire and wheel rim specifications according to vehicle requirements (refer to label near fuel filler cap). State 5: ABS warning light intermittently flashes. Cause: Improperly adjusted brake light switch; internal contact issues in brake lights. Solution: With engine running, press brake pedal fully while manually pushing the brake switch lever downward, then release pedal to reset position; replace brake light switch if necessary.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.