What brand is the transmission of the GAC Trumpchi Shadow Leopard?

1 Answers
VanHaley
07/29/25 8:51pm
The transmission of the GAC Trumpchi Shadow Leopard is manufactured by Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the top market share in the automotive automatic transmission sector globally. The GAC Trumpchi Shadow Leopard is equipped with a 7-speed wet dual-clutch transmission (DCT). Unlike conventional automatic transmission systems, the Dual Clutch Transmission (DCT) is based on a manual transmission but operates as an automatic one. It combines the flexibility of a manual transmission with the comfort of an automatic transmission while providing uninterrupted power output. When using the transmission of the GAC Trumpchi Shadow Leopard daily, pay attention to the following points: Do not delay changing the transmission oil for extended periods. Prolonged intervals between oil changes can damage internal components such as bearings and the transmission housing. Avoid coasting in neutral for long durations. While many experienced drivers may coast in neutral with manual transmission vehicles, doing so with an automatic transmission can cause overheating. Additionally, shifting back into Drive (D) mode may result in a noticeable jolt. Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers attempt to showcase smooth operation by shifting into reverse while the vehicle is still moving, which can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D) mode. Automatic transmission vehicles can overheat under heavy loads or struggle with uphill climbs due to premature upshifting. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If the automatic transmission vehicle breaks down, use a flatbed tow truck to transport it while the vehicle is in Neutral (N). Avoid using tow ropes or dragging the vehicle directly, as this can cause damage.
Was this review help?
19
4
Share
More Forum Discussions

Can a C4 driver's license drive a four-wheel low-speed electric vehicle?

C4 driver's license cannot drive four-wheel low-speed electric vehicles. The corresponding vehicle type for a C4 driver's license is three-wheeled motor vehicles. Here are the specific details about the C4 driver's license: Permitted vehicles: Three-wheeled motor vehicles (originally three-wheeled agricultural transport vehicles), ordinary three-wheeled motorcycles, three-wheeled motorcycles with an engine displacement greater than 50ml or a maximum design speed greater than 50km/h. Introduction: The C4D driver's license is a type of driver's license, which was a category before May 2004. After May 2004, according to the "Road Traffic Safety Law" and its supporting policies, all C4D licenses in the vehicle management office's database have been automatically converted to B1 licenses.
9
4
Share

Are New Energy Vehicles Considered Motor Vehicles?

New energy vehicles are motor vehicles. Reasons why new energy vehicles are motor vehicles: Because the length, width, and speed of electric vehicles are the same as those of motor vehicles, except that they do not require fuel. Therefore, new energy electric vehicles still fall under the category of motor vehicles. Additional Information: After the implementation of the new national standard policy, electric vehicles are also divided into two categories: one is non-motor vehicles, and the other is motor vehicles. The new national standard limits the speed of electric vehicles to 25km/h, meaning models with speeds below 25km/h are classified as non-motor vehicles, while models exceeding 25km/h are considered electric motorcycles or motorcycles.
5
2
Share

How to Remove the Brake Pads on a BMW X2?

The steps to remove the brake pads on a BMW X2 are as follows: First, lift the vehicle and remove the wheel. When lifting, loosen the wheel fixing screws first, then reset the brake caliper. Use special tools if available; if not, a screwdriver can be used. Next, remove the caliper fixing bolts to take out the old brake pads. Brake pads are critical safety components, and their condition plays a decisive role in the effectiveness of all braking. Taking the 2021 BMW X2 sDrive25i Premium M Off-Road Package as an example, its dimensions are 4379 mm in length, 1824 mm in width, and 1555 mm in height, with a wheelbase of 2670 mm.
8
1
Share

Do gas stations sell engine oil?

Gas stations also sell engine oil. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much oil is added to the engine, the oil volume will expand as the engine temperature rises, increasing pressure in the oil chamber. This leads to greater operational resistance, resulting in reduced vehicle power and increased fuel consumption. Overfilling engine oil: Excessive engine oil can cause oil to leak through the crankcase vent pipe. The increased pressure in the crankcase may loosen the oil seals due to oil pressure, leading to oil leaks. Heat dissipation: Overfilling engine oil can affect the engine's heat dissipation.
17
3
Share

What Causes Greater Wear on the Outer Side of Tires Compared to the Inner Side?

Tires showing greater wear on the outer side compared to the inner side may indicate misalignment. Reasons for outer tire wear: Prolonged incorrect tire pressure in the car, front wheel misalignment, and poor driving habits. Good driving habits: While driving, in addition to handling road conditions, choose the road surface carefully to avoid sharp stones, glass, metal, and other objects that may puncture or scratch the tires. Steer clear of chemical spills that could adhere to the tires, preventing corrosion. When driving on roads with significant curvature, try to stay centered to avoid and reduce vehicle weight shift, minimizing uneven tire wear caused by increased load on one side.
7
0
Share

What are the reasons for a motorcycle not starting in gear?

Motorcycles not starting in gear mainly involve the following situations: Electric start issues: Frequent use of the battery for electric starting can easily lead to battery depletion, and a dead battery can damage it. Idle speed issues: Failure to start is due to low idle speed. Normally, in summer, the speedometer needle should point to one mark, while in winter, it should be adjusted to between one and a half to two marks. Weather issues: In the warm climate of the south, apart from motorcycle malfunctions, there are no issues with starting. In the northeast during early spring or late autumn approaching winter, morning temperatures drop below 0 degrees Celsius, causing the engine oil to thicken and making starting difficult.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.