···
Log in / Register

What brand is the transmission of the Fengguang 580?

3 Answers
LeGideon
09/05/25 3:45am
The Fengguang 580 is equipped with three types of transmissions: a 6-speed manual transmission, a 5-speed manual transmission, and a CVT continuously variable transmission. Below is relevant information about the Fengguang 580's transmissions: 1. The manual transmission is also known as an MT transmission. Manual transmissions can be considered the most stable type of transmission in the world today, as they have the longest development history and the most mature technology. Earlier manual transmissions typically had 5 speeds, but with technological advancements, many now feature 6 speeds. 2. The CVT continuously variable transmission is a type of automatic transmission. Currently, there are four main types of automatic transmissions: hydraulic automatic transmission (AT), dual-clutch automatic transmission (DCT, referred to as DSG by Volkswagen), electro-mechanical automatic transmission (AMT), and mechanical continuously variable automatic transmission (CVT). Comparatively, CVT transmissions have the lowest cost and the least technical requirements. Following CVTs are dual-clutch transmissions.
Was this review help?
10
1
Share
DiArya
09/17/25 4:20am
I've been driving the Dongfeng Fengguang 580 for a while now, equipped with a Punch-brand automatic transmission. The gear shifts feel quite smooth, and there's no noticeable jerkiness while driving. This transmission is a Belgian brand, well-suited for congested urban driving conditions, and offers reasonable fuel consumption. However, I recommend regular fluid checks to prevent wear and tear that could affect its lifespan. If you notice any unusual noises or delays during gear shifts, it's best to visit a repair shop early. Pay attention to driving habits—avoid frequent sudden acceleration or braking to prolong the transmission's life. Most automatic versions of the Fengguang 580 come with this transmission, while manual versions might use other brands, like domestic ones or Aisin. Overall, this brand is considered reliable among similar vehicles, with no major issues, but it's advisable to check the manual upon purchasing a new car to confirm the specific model.
Was this review help?
19
2
Share
Expand All
HopeAnn
10/31/25 4:50am
As a tech enthusiast, I find the transmission brands used in the Fengguang 580 quite interesting. It's typically equipped with transmissions from Punch or Hyundai. Punch is a Belgian company specializing in dual-clutch transmissions, known for fast shifting and fuel efficiency. Through my research, I've learned that different model years may switch suppliers - for instance, early manual versions used Dongfeng transmissions while automatic models adopted Punch's VT3 units. The transmission is a core automotive component that operates through hydraulic systems and gear sets; a well-designed one significantly enhances driving experience. In the Fengguang 580, it delivers smooth performance even on long journeys, though occasional control module checks are recommended to prevent overheating issues. For prospective buyers, I'd suggest test-driving to evaluate transmission responsiveness and reviewing maintenance records to ensure original equipment.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Can You Steer with One Hand in Subject Three?

Subject Three does not allow steering with one hand. Here are the specific details: 1. Regulation: While driving, except for necessary operations like shifting gears, both hands must not leave the steering wheel. The left and right hands should be placed at the "nine o'clock" and "three o'clock" positions on the steering wheel, respectively. 2. Reason: If the steering wheel is viewed as a clock face, the correct hand position is for the left hand to grip between nine and ten o'clock and the right hand between three and four o'clock. In the event of a collision, this posture is more conducive to supporting the body. If only four fingers are used to grip the steering wheel with the thumb extended and resting on it, when the wheel hits a rock or a high curb, the front wheel may suddenly turn to one side, causing the steering wheel to rotate rapidly, which could potentially break the thumb.
10
3
Share

Can You Start in Second Gear for Subject 3?

Subject 3 does not allow starting in second gear. Here are the details: 1. Introduction: Subject 3, also known as the Road Safety Driving Test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe civilized driving knowledge test in the motor vehicle driver's examination. 2. Gear Selection: Turning: Use second gear, signal three seconds in advance, and try to keep second gear for less than 20 seconds. U-turn: Change to the opposite fast lane, accelerate, and shift to third gear. Pull over: Do not release the clutch, shift to first gear. Upshift indicators: 1st to 2nd (10 km/h); 2nd to 3rd (20 km/h); 3rd to 4th (30 km/h); 4th to 5th (40 km/h). Downshift indicators: 5th to 4th (30 km/h), 4th to 3rd (25 km/h), 3rd to 2nd (20 km/h), 2nd to 1st (10 km/h).
15
4
Share

Can I Apply the Brake to Slow Down When Pulling Over in Subject Three?

Yes, you can apply the brake to slow down when pulling over in Subject Three. Here are the details: 1. Reason: From a rule perspective, there is no prohibition against using the clutch to control speed, so using the clutch to regulate speed is acceptable. After the pull-over instruction is given, applying the brake counts as stopping, indicating that the examinee has completed the required action, hence the requirement to use the clutch for speed control. 2. Exam Tips: During the Subject Three test, try to avoid prolonged semi-clutch operation, as this can easily cause the engine to stall, leading to test failure. Especially when completing maneuvers like U-turns or pull-overs that require slow speeds, using first gear at idle speed is relatively safer than semi-clutch (semi-engagement). Pulling over is not difficult; it mainly depends on the individual's ability to judge the distance from the side line, and controlling speed with the brake is sufficient.
6
5
Share

What is the reason for failing to engage the gear twice consecutively in Subject Three?

Failing to engage the gear twice consecutively in Subject Three may be due to not releasing the hand immediately after shifting but instead pulling the gear again, thus being judged as failing to engage the gear twice consecutively. Below are the specific details: 1. Changing lanes: Before changing lanes, observe and assess the traffic flow behind, beside, and in the lane you intend to change to. After confirming safety, turn on the turn signal, and then check again through the rearview mirror to see if any vehicles are overtaking on both sides of the road. Ensure there is a safe distance allowed in the lane you are about to enter. Without hindering the normal flow of traffic in that lane, smoothly steer into the desired lane and then turn off the turn signal. 2. Gear introduction: Use first gear when pulling over to park. For turns: Use second gear, signal three seconds in advance, and try to keep second gear engaged for no more than 20 seconds. For U-turns: Shift to the opposite fast lane, accelerate, and shift to third gear. When pulling over to park: Do not release the clutch, shift to first gear.
12
4
Share

Can You Drive in Second Gear During Subject Three?

You can drive in second gear during Subject Three. Here are the specific details: 1. Reason: There are two segments of straight-line driving. One segment occurs after completing the gear shifting (acceleration and deceleration), during which you must drive in third gear. Except for gear shifting and turning, you must use third gear in all other situations. This is because the total distance driven in first and second gears combined during Subject Three cannot exceed 500 meters. Specifically, you cannot drive continuously in first gear for more than 100 meters or in second gear for more than 200 meters. Therefore, third gear is necessary, maintaining a speed of around 35 km/h. However, during straight-line driving, you must accelerate to 50 km/h for at least two seconds. After completing the gear shifting segment, there are no special requirements for the subsequent straight-line driving segment. 2. Subject Three Test Content: Preparation before starting, simulated lighting test, starting, straight-line driving, gear shifting operation, lane changing, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving.
4
2
Share

Can I use second gear for a long time in Subject 3?

You cannot use second gear for a long time in Subject 3. Here are the details: 1. Reason: It is not allowed to stay in second gear continuously. After starting in first gear, there will be a prompt indicating 'Start completed'. Once the start is completed, you should immediately shift to second gear. After adding some throttle in second gear and reaching 20 km/h, shift to third gear immediately. Except when making a U-turn where shifting to second gear is necessary, you should shift back to third gear immediately after entering the straight lane. Maintain third gear throughout the drive with a speed between 20-30 km/h. If you drive in second gear continuously, it will be judged as prolonged low-speed driving and considered unqualified. 2. U-turn technique: Before making a U-turn, turn on the left signal, decelerate (to about 5 km/h) or even stop, observe the road conditions carefully, and pay close attention to oncoming traffic (especially vehicles that are farther away but moving fast). Stop and wait if necessary.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.