What brand is the Toyota CHR transmission?

1 Answers
MacBella
07/29/25 9:07pm
Toyota CHR's transmission is from Aisin, and all models use a CVT (Continuously Variable Transmission). (No brand was answered) CVT is a type of automatic transmission. Currently, there are four main types of automatic transmissions: Hydraulic Automatic Transmission (AT), Dual-Clutch Transmission (DCT, called DSG by Volkswagen), Automated Manual Transmission (AMT), and Continuously Variable Transmission (CVT). Comparatively, CVT transmissions have the lowest cost and the least technical requirements. Next is the dual-clutch transmission. This is why most entry-level models use CVT transmissions. In the civilian vehicle sector, AT transmissions are considered the strongest in terms of overall performance. Correspondingly, AT transmissions also have the highest cost. The Toyota CHR's body dimensions are 4360mm in length, 1795mm in width, and 1555mm in height, with a wheelbase of 2640mm. Compared to its peers, its length and wheelbase offer significant advantages.
Was this review help?
19
2
Share
More Forum Discussions

What Tires Are Suitable for the RAV4?

Toyota RAV4 comes with Yokohama brand tires, and the best all-around performance tire is Bridgestone. Here is some additional information about tires: 1. Yokohama tires are the most wear-resistant and offer good handling performance, but they are relatively hard, have slightly more road noise, and provide relatively less comfort. 2. Michelin tires have a relatively good reputation, but they are also more expensive. 3. Goodyear tires are more wear-resistant but have slightly more road noise. 4. Continental tires have relatively better noise reduction effects but are less wear-resistant and do not offer strong grip.
8
0
Share

How to Adjust the Date on Tiggo 3?

The following are the specific steps to adjust the time on Chery Tiggo 3: 1. First, turn the key to the ACC position or remove it, at which point the instrument panel will turn off. 2. Turn the light switch again to turn on the parking lights. 3. At this point, the instrument panel backlight will illuminate. 4. Press and hold the instrument panel button for a while, and the hour section of the time on the instrument panel will start flashing. Then release the button and press it again; each press increases the hour by one. 5. After adjusting the hour, do not press the button. The hour will flash five times and then automatically switch to the minutes. Each press of the button increases the minutes by one, and holding it down will continuously increase the minutes. After adjustment, do not press the button. The minutes will flash five times and then stop, completing the adjustment.
18
0
Share

How to distinguish between Mercedes-Benz C and E?

Mercedes-Benz C-Class belongs to the compact mid-size sedan category, competing with BMW 3 Series and Audi A4 series; while the Mercedes-Benz E-Class series is a mid-to-high-end executive sedan, competing with BMW 5 Series and Audi A6 series. Specific details are as follows: 1. Mercedes-Benz C-Class - A compact sedan series, which includes not only the standard four-door sedan but also five-door station wagon and three-door hatchback variants. The Mercedes-Benz C-180-K Classic is the first model launched by a Chinese luxury car manufacturer that qualifies for the government's automobile consumption tax reduction policy. Equipped with a 1.6L supercharged engine, its power performance is remarkable, with maximum power and torque reaching 115 kW, and a top speed of 223 km/h. Additionally, the Mercedes-Benz C-180-K Classic boasts unparalleled fuel efficiency, with a combined fuel consumption of only 7.7L per 100 km. 2. E-Class - Known for its riding comfort, the saying 'Drive BMW, ride Mercedes' is widely recognized. The E-Class series offers average space, slightly higher prices, and minor electronic glitches. In urban congested conditions, fuel consumption can be as high as 16L/100km; on highways, it can drop to as low as 9L/100km; daily driving mostly ranges between 11-13L/100km.
9
4
Share

Can You Park the Car by Only Engaging the P Gear Without Pulling the Handbrake?

Engaging the P gear allows for direct parking. Below is the principle of how engaging the P gear enables direct parking: 1. When the driver parks and shifts into the P gear, the control lever pushes the pawl into the slot of the parking gear. At this point, the parking gear, through the interaction of the slot and the pawl, and the hinge connection of the other end of the pawl with the transmission housing, effectively locks the parking gear together with the transmission housing. Since the parking gear is connected to the differential, half-shafts, and wheels, this action essentially fixes the wheels to the transmission housing, preventing them from moving, thereby achieving the purpose of stopping the car. 2. When the gear shift lever is in this position, the parking lock mechanism locks the transmission output shaft. In P gear, the drive shaft is partially locked inside the transmission, so even without pressing the brake on flat ground, the vehicle has a certain braking force.
15
2
Share

Which region does the license plate starting with 'Qing' belong to?

License plates starting with 'Qing' belong to vehicles registered in Qinghai Province, where 'Qing' is the abbreviated Chinese character for Qinghai. Below is additional information: 1. The vehicle registration authority code consists of 2 characters, combining Chinese characters and English letters. 2. The Chinese character represents the abbreviation of the province, autonomous region, or municipality directly under the central government, while the English letter denotes the code of the vehicle management office, with 'A' representing the provincial capital and 'B' the second-largest city. 3. The license plate codes for various regions in Qinghai Province are as follows: Qing A is Xining City, Qing B is Haidong City, Qing C is Haibei Tibetan Autonomous Prefecture, Qing D is Huangnan Tibetan Autonomous Prefecture, Qing E is Hainan Tibetan Autonomous Prefecture, Qing F is Golog Tibetan Autonomous Prefecture, Qing G is Yushu Tibetan Autonomous Prefecture, and Qing H is Haixi Mongol and Tibetan Autonomous Prefecture.
4
0
Share

Introduction to the Engine of the Senova D70?

Senova D70 is equipped with a 1.8-liter turbocharged engine. Here are the detailed specifications: 1. Detailed introduction to the Senova 1.8-liter turbocharged engine: The engine delivers 177 horsepower and a maximum torque of 240 Nm. It reaches its maximum power output at 5,500 rpm and can produce its maximum torque between 1,800 and 4,500 rpm. The engine features direct injection technology, an aluminum alloy cylinder head, and a cast iron cylinder block. It is paired with a 5-speed automatic transmission. 2. The front suspension of the Senova D70 uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension: The multi-link independent suspension enhances wheel contact with the ground, improving both comfort and handling of the vehicle. 3. The power delivery of a turbocharged engine differs from that of a naturally aspirated engine: Turbocharged engines can produce maximum torque at relatively low rpm, making them ideal for stop-and-go city driving.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.