What brand is the tire with an elephant logo?

Where is the Thermostat Located in a Van?

The thermostat in a van is typically installed at the water inlet of the engine's water pump. Additional Information: Primary Function of the Thermostat: The main role of the thermostat is to automatically regulate the amount of water entering the radiator based on the actual temperature of the coolant. This adjustment alters the circulation range of water within the radiator, enabling the cooling system to dissipate heat effectively and ensuring the engine operates within an optimal temperature range. Working Principle of an Automotive Thermostat: Essentially, an automotive thermostat is an automatic temperature-regulating device (equipped with a temperature-sensing component). It controls the main and auxiliary valves of the thermostat according to the temperature of the coolant, thereby automatically adjusting the water flow into the radiator to regulate the cooling system's heat dissipation capacity. When the engine has not yet reached the appropriate operating temperature, the auxiliary valve of the thermostat opens while the main valve remains closed. In this state, the coolant bypasses the vehicle's radiator and circulates only between the water jacket and the water pump in a small loop.

14

3

Share

What is the difference between Honda eCVT and CVT?

The differences between Honda eCVT and CVT are as follows: 1. Different structures: The structure of CVT mainly consists of two sets of pulleys (drive pulley, driven pulley), a transmission belt (steel belt), an oil pump, a torque converter, an actuator (valve body, oil circuit), sensors, and a control computer. The composition is relatively complex, and the steel belt has limited torque capacity, so it is generally only used in small vehicles as a transmission system; The structure of eCVT is simpler, without complex mechanisms such as clutches, torque converters, or gear shaft sets found in traditional transmission systems. It consists of a set of planetary gears and two motors. 2. Different principles: In CVT technology, Motor 2 is responsible for starting, low-speed driving, and hybrid driving; Motor 1 is mainly responsible for starting the engine and generating electricity. In most cases, the engine does not directly drive the wheels; eCVT not only transmits power but also couples the energy of the engine and the motor to achieve power output. Therefore, it is actually a power combination system, specifically designed as a power distribution mechanism for hybrid models. 3. Different power characteristics: eCVT is Toyota's strong hybrid solution's electric transmission mechanism, consisting of two motors and a set of planetary gears. It can achieve electric drive, continuously variable transmission, and energy recovery; CVT refers to the ordinary mechanical continuously variable transmission.

16

1

Share

What Causes the Fan in a Van to Stop Working?

If the cooling fan in your vehicle is not working, it could be due to a clogged air filter, insufficient coolant, a blocked heater core, or poor water temperature control. Other possible causes include transformer failure or a malfunctioning fan itself. Additional Information: Solutions: Method 1: First, check if the air filter is clogged. A non-functioning cooling fan can cause the engine's water temperature to rise. Modern vehicles use electronically controlled cooling fans, which only operate when the water temperature reaches a certain level. Method 2: If the water temperature meets the requirements but the fan still doesn't work, the issue might be a faulty relay or a malfunctioning temperature control switch. The temperature control switch can significantly impact the cooling fan's performance, so regular checks are necessary. Method 3: A damaged water temperature relay is often caused by poor wiring connections or a malfunction. If there's no response, the relay should be replaced immediately. A faulty temperature control switch can lead to elevated water temperature and prevent the cooling fan from receiving power properly.

3

1

Share

What is the normal difference between the production dates of tires and cars?

Tire and car production dates typically have a normal difference within one year. Below are specific instructions for tire replacement: Replacement time varies by situation: For car owners with good driving habits, tires are generally replaced every 3-5 years or after driving 60,000-80,000 kilometers. If driving conditions are more severe, such as frequently driving on gravel roads or experiencing frequent traffic jams, sudden braking, or sharp turns, the replacement interval will be shorter. Tire aging time: The main material of tires is rubber, which undergoes natural aging. This is mainly manifested by the tires becoming harder and the sidewalls developing small cracks. The natural aging time is generally 4-5 years. Tires should be replaced promptly after 5 years to prevent the risk of blowouts. Observe tire wear: If tire wear is severe and the tread pattern is level with the wear indicator, the tires need to be replaced. Otherwise, braking on wet or slippery roads will be more difficult, and the vehicle is prone to losing control. Driving on excessively rough roads may also lead to blowouts.

15

2

Share

Reasons Why a Golf Brake Fault Car Won't Start

Golf brake fault car won't start mainly due to excessive carbon deposits in the idle motor, intake tract, intake valve, and combustion chamber. Extended information: Brake: It is a device that functions to decelerate, stop, or maintain the stopped state of moving parts (or moving machinery). It is a mechanical component that stops or decelerates moving parts in machinery, commonly known as the brake. The brake mainly consists of a brake frame, brake components, and an operating device. Detailed information: Reason one: Excessive carbon deposits and dirt in the intake tract change the cross-sectional area of the air passage, resulting in a mixture that is too rich or too lean, causing abnormal combustion or engine shaking after starting, or even failure to start. Reason two: Problems with the fuel injector, such as leakage or excessive carbon deposits, cause the mixture to be too lean during startup, making it difficult to start. Reason three: When the carbon canister or carbon canister solenoid valve malfunctions, it can also lead to difficulty in starting.

9

1

Share

What was the earliest car in China?

China's earliest car was the Minsheng brand truck. Here are the relevant details: 1. Introduction: The first domestically produced car - the Minsheng Model 75 truck. 2. Background: To celebrate the debut of the first domestically produced car, the Liaoning Mortar Factory held a grand celebration. The truck had a load capacity of 1.82 tons, featured a long-nose design in brown color, and was equipped with a six-cylinder water-cooled gasoline engine producing 65 horsepower. It had a wheelbase of 4.7 meters, single tires on all four wheels, and a top speed of 40 kilometers per hour. 3. Features: The self-designed cushioned rear axle had unique characteristics. The radiator was divided into four sections, allowing the vehicle to continue operating normally even if one section was damaged. Except for components like the engine, rear axle, electrical equipment, and tires which used original parts, the factory redesigned and manufactured all other components.

5

0

Share

What brand is the tire with an elephant logo?

Where is the Thermostat Located in a Van?

What is the difference between Honda eCVT and CVT?

What Causes the Fan in a Van to Stop Working?

What is the normal difference between the production dates of tires and cars?

Reasons Why a Golf Brake Fault Car Won't Start

What was the earliest car in China?

How much is the speeding when driving at 60 in a 50 speed limit zone? Will points be deducted?

Drive Fast or Slow Through Water?

How many points will be deducted for changing lanes over a solid yellow line?

Can I Claim Insurance for My Car If the Other Party Is Fully Liable for the Rear-End Collision?