What brand is the tire with a scorpion logo?

1 Answers
VanJaxson
07/25/25 1:30pm
It is the Pirelli brand. Pirelli's earliest Scorpion tires date back to 1981, when Pirelli specially developed the Scorpion run-flat tires for the Lamborghini LM002 ultra-high-performance off-road vehicle. The relevant introduction to the tires is as follows: Tire Introduction: Tires are rubber products, so even if not used, they will naturally age. Before using stock tires, it is necessary to check for cracks and rubber aging before use. Tire Storage Methods: If stored in a suitable environment with constant temperature and away from light, the aging process of rubber will slow down significantly, and using them after several years is not a problem. If stored in a place with direct sunlight and large temperature variations, the rubber will age and crack, making it unsuitable for use even if never used before, as the rubber loses its elasticity and cannot provide the necessary grip.
Was this review help?
3
5
Share
More Forum Discussions

How to deal with sunroof leakage?

The solutions for sunroof leakage are as follows: 1. Check whether there is dirt such as dust, leaves or small branches in the rubber seal and groove of the sunroof: When using a high-pressure water gun to wash the car, do not directly spray water at the sealing ring around the sunroof, otherwise it is easy to cause the sealing ring to deform under the high-pressure water spray, and over time, water will easily enter the car. 2. Check whether the drain is blocked by dust: Most sunroof leaks are caused by blocked drains. There are no special requirements for the daily maintenance of the car sunroof. Just regularly check whether the surrounding seals are damaged and check the lubrication condition of the track. It is recommended to go to a 4S repair shop and ask the maintenance technician to pour water on the sunroof to test and find the leakage point before repairing it.
11
1
Share

Where is the fog light switch of Baojun 310?

Baojun 310 fog light switch is located on the combination switch lever under the steering wheel. Turn the middle ring of the combination switch lever to the ON position to turn on the front fog lights. Extended information: 1. High luminous intensity and reasonable light intensity distribution. This ensures that the car's tail lights can be clearly distinguished by other drivers or pedestrians even in bright daylight. 2. Fast light emission rise time. When driving at night, the light from the tail lights will not cause glare or discomfort to other drivers or pedestrians. 3. Long life, maintenance-free, and low energy consumption. 4. Strong switch durability. 5. Good resistance to vibration and impact.
4
0
Share

How to adjust the clock time on BYD F3?

Method to adjust the clock time on BYD F3: 1. Start the vehicle, and you will see a button at the lower right of the car dashboard; 2. Press and hold the adjustment button for about 3 seconds until the hour position on the dashboard starts flashing and jumping, then release and press the button briefly to adjust to the desired hour; 3. After adjusting the hour, release the button, and it will automatically switch to the minute position; 4. Briefly press the same button to adjust to the desired minute, then release to complete the time adjustment. The BYD F3 is a compact car launched by BYD, with dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, a wheelbase of 2600mm, equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kw, and paired with a 5-speed manual transmission.
3
0
Share

What does it mean when a wrench appears on the car dashboard?

When a wrench appears on the car dashboard, it serves as a reminder for the owner to perform scheduled maintenance at the required mileage. Below are the specific consequences of neglecting car maintenance: 1. Bearing labor costs: For vehicles within the warranty period, failure to perform basic maintenance on time may result in having to pay for parts and labor fees at the 4S shop if a malfunction occurs. Manufacturers will not be responsible for issues caused by circuit problems. 2. Compromised driving safety: Engine oil, when exposed to air and heat, is prone to gradual oxidation. As acidic substances, gum, and iron filings accumulate in the oil, its color darkens and viscosity decreases. Prolonged failure to change the oil may lead to these deposits clogging oil passages, causing dry friction in the engine and severely affecting its lifespan. 3. Smoke and fire hazards: The cooling efficiency of the coolant decreases, making it easier for scale to form. Continuing to drive with an overheated engine may result in smoke or fire.
11
0
Share

What is the purpose of the car OBD interface?

The car OBD interface is used to connect to a diagnostic computer. Modern vehicles have highly developed electronic and fault diagnosis systems. When a part of the vehicle malfunctions, the computer generates a fault code. These fault codes are not directly displayed on the dashboard; they can only be read by connecting a diagnostic computer to the OBD interface to identify which part is faulty. The OBD interface not only connects to diagnostic computers but can also connect to some external displays. Once connected, these external displays can read certain data, such as water temperature. The OBD interface is very important and is usually located near the driver's pedal area. When using the vehicle, be careful not to let dirt enter the OBD interface and avoid exposing it to water.
7
3
Share

What are the reasons why a Passat won't start?

Here are the reasons why a Passat won't start: 1. The battery is dead, and the starter cannot operate normally. 2. Fuel flow is blocked, there is no oil pressure in the engine fuel supply pipe, and impurities mixed in cause the fuel pipeline to be obstructed. 3. The ignition system is not working well, with spark plug carbon deposits, incorrect spark plug electrode gaps, insufficient ignition coil energy, or poor high-voltage wire condition. Here are some emergency methods for a Passat that won't start: 1. Call the service station for rescue and have the battery recharged at the service station. 2. Place the car in a warm environment and clean the fuel system. 3. Remove the spark plugs and clean the oil stains and carbon deposits between the electrodes.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.