What brand is the Tayron's transmission?

1 Answers
DeLydia
07/24/25 10:34pm
The Tayron uses a transmission from Volkswagen Automatic Transmission (Dalian) Co., Ltd. Volkswagen Automatic Transmission (Dalian) Co., Ltd. (VWATD) is the first wholly-owned subsidiary of Volkswagen Group China. Established on September 24, 2007, the company is located in Dalian and primarily produces the latest dual-clutch automatic transmissions. The Tayron is equipped with a 7-speed wet dual-clutch transmission. A wet dual-clutch transmission refers to a dual-clutch transmission where the clutch plates are immersed in transmission fluid. There are two types of dual-clutch transmissions: dry and wet. When using the Tayron's transmission in daily driving, pay attention to the following points: Do not delay changing the transmission fluid for too long. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. Many experienced drivers of manual transmission vehicles coast in neutral, but for automatic transmission vehicles, this can cause overheating and create a jolt when shifting back into Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle has come to a complete stop. Some drivers shift into reverse while the vehicle is still moving to demonstrate smooth operation, but this can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). On steep inclines, automatic transmission vehicles may overheat due to high load or shift prematurely, resulting in insufficient power. In such cases, use manual mode to lock in a lower gear or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck and move the vehicle onto the tow bed while it is in Neutral (N). Do not use a tow rope or tow the vehicle directly with another vehicle.
Was this review help?
10
5
Share
More Forum Discussions

Which number is the Santana air conditioning relay?

Santana air conditioning relay is the No. 13 relay located at the upper left corner, specifically the 53rd 4-pin relay. The new Santana air conditioning relay is on the circuit board behind the fuse box. The function of the air conditioning relay includes compressor start relay, fan start relay, heating switch relay, defrost switch relay, and electric auxiliary heating switch relay. Reasons why the car air conditioner has no airflow: 1. Blower motor failure: The car blower motor is a crucial component for air conditioning airflow. If the air conditioning compressor fails during use, the car air conditioner will definitely not produce airflow. 2. Clogged air filter: The air filter is a significant and common reason for no airflow. During operation, the car air conditioner absorbs many impurities from the air. 3. Control system failure: Possible issues include the air door, air conditioning computer, or control switch malfunction. Control system switches generally do not fail. It is recommended that car owners visit a 4S shop for inspection, as this will simplify the troubleshooting process.
13
1
Share

Which brand of tires is suitable for the Teana?

Dongfeng Nissan Teana comes standard with 205/65-R16 radial tires. The tread width of this tire is 205, measured in millimeters, meaning it is 20.5 centimeters wide. The aspect ratio is 65%, resulting in a tire thickness of 133.25 centimeters, which can enhance driving comfort. The 'R' stands for radial tire, indicating the tire contains a steel wire mesh inside, and '16' refers to the applicable rim diameter of 16 inches. More details are as follows: 1. Tires are also categorized into winter and summer types, with varying needs for different seasons. Many currently use all-season tires, which can be used year-round. 2. Although all-season tires have strong compatibility, they may struggle in cold northern regions, especially in areas with heavy snow and severe freezing conditions, where potential hazards can multiply, leading to irreversible dangers. 3. Generally, it is recommended to switch to winter tires when temperatures drop below 7°C, as regular all-season tires tend to harden and lose grip in colder conditions, compromising driving safety. 4. Therefore, to avoid risks, it is advisable to switch to tires suitable for the current season.
3
3
Share

Why doesn't the 2021 Bora update data after connecting to the internet?

When the vehicle is powered on, you can connect to the internet by using the relevant functions on the central control panel, such as searching for songs to play online, real-time navigation functions, and any software installed on the vehicle's infotainment system that requires internet access. Additional information is as follows: 1. Vehicle dimensions: The 2021 Bora has a body length of 4663 mm, a width of 1815 mm, a height of 1462 mm, a wheelbase of 2688 mm, and a minimum ground clearance of 126 mm. The vehicle structure is a 4-door, 5-seater sedan with a fuel tank capacity of 50 liters, a trunk capacity of 506 liters, and a curb weight of 1285 kg. 2. Warranty details: The 2021 Bora comes with a whole vehicle warranty of 3 years or 100,000 kilometers, whichever comes first. Currently, there are three powertrain options available for sale: a 1.2T turbocharged engine, a 1.4T turbocharged engine, and a 1.5L naturally aspirated engine, each paired with different transmissions.
4
3
Share

What are the effects of headlights being displaced with gaps after a collision?

There is basically no significant impact, but you can also go to a repair shop or a 4S store for replacement. The maintenance of car headlights is as follows: 1. Regularly check whether the headlights are working properly: Checking the headlights is not as simple as taking a casual look. When inspecting the headlights, you need to check whether various types of headlights are functioning correctly. Additionally, check whether the direction of the headlight beam is deviated and whether the brightness is sufficient. Regular inspection of the headlight condition helps you understand their status in time to prevent accidents. 2. Replace car bulbs periodically: Car headlight bulbs are consumables with a fixed lifespan. Bulbs that have been used for too long will dim, and the illumination distance will shorten, which can affect nighttime driving and pose a significant safety hazard. 3. Clean the lamp covers frequently: While driving on the road, it is inevitable that water splashes will occur, and mud spots may stick to the car headlight covers. Generally, headlight covers are made of special materials with good sealing performance. However, excessive sludge on the headlight covers can affect the car's appearance as well as the lighting effect of the headlights.
19
0
Share

What Causes the Car to Shake When Driving at 100 km/h?

Reasons for car body shaking at around 100 km/h include: 1. Improper engine air-fuel mixture: When the vehicle reaches around 100 km/h, the engine fault light may be on or suddenly turn on, accompanied by car body shaking. This is caused by an improper engine air-fuel mixture, with common issues being spark plugs, ignition coils, fuel injectors, carbon deposits, fuel pump, etc., leading to poor performance in one or multiple cylinders. The cause can be determined by checking the engine fault codes. 2. Aging or damage to engine or transmission mounts: Resonance caused by aging or damage to engine or transmission mounts. In this case, inspect the mounts and replace them if damaged to resolve the issue. 3. Damage to chassis half-shaft or drive shaft: Damage to the chassis half-shaft or drive shaft, often occurring during acceleration or deceleration. Inspect and replace the faulty drive shaft or half-shaft. 4. Need for tire and wheel rim balancing: Tires and wheel rims may require balancing, or there could be aging and deformation of tires or wheel rims. This situation is often accompanied by steering wheel shaking. Perform tire balancing as needed to check the condition of tires and wheel rims.
16
4
Share

Where is the cylinder head temperature sensor on the Ford Mondeo?

Ford Mondeo cylinder head temperature sensor is located on the cylinder head, above the exhaust pipe. The working principle of an automobile cylinder is to guide the piston to perform linear reciprocating motion inside the cylinder. Air in the engine cylinder converts thermal energy into mechanical energy through expansion; gas in the compressor cylinder receives piston compression to increase pressure, thereby providing a power source. The following are the classifications of cylinders: 1. Single-acting cylinder: Only one end has a piston rod, with air supplied from one side of the piston to accumulate energy and generate air pressure. The air pressure pushes the piston to produce thrust for extension, and it returns via spring or self-weight; 2. Double-acting cylinder: Air is alternately supplied from both sides of the piston, outputting force in one or two directions; 3. Diaphragm cylinder: Uses a diaphragm instead of a piston, outputting force in only one direction and resetting with a spring. It has good sealing performance but a short stroke; 4. Impact cylinder: This is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of the piston's high-speed (10-20 meters/second) movement to perform work. The impact cylinder adds a middle cover with a nozzle and a drain port.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.