What brand is the spare tire for MG ZS?

2 Answers
LeColton
07/29/25 7:28am
MG ZS's spare tire is from the Maxxis brand, with the model number Bravohpm3 and specifications of 215/50R17. The MG ZS is a compact SUV with body dimensions of 4323mm in length, 1809mm in width, and 1653mm in height, a wheelbase of 2585mm, a fuel tank capacity of 45 liters, and a trunk capacity ranging from 359 to 1187 liters. The MG ZS is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS and a maximum power output of 120kW, paired with a 6-speed automatic transmission. It features a MacPherson independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
6
1
Share
VanJace
08/13/25 12:58am
As a car enthusiast, I often research vehicles like the MG ZS. Its spare tire is typically a temporary spare, usually sized 125/80R16 or similar small-size steel wheel design. Brand-wise, it's probably not from an independent major brand like Michelin, but rather provided by OEM suppliers such as Continental or domestic brands like Giti, with often inconspicuous labeling – just small lettering on the tire sidewall. This type of spare is strictly for emergency use, with a speed limit of 80 km/h to avoid accidents. Having driven similar cars before, I noticed the spare makes the vehicle feel unstable, so I recommend keeping a tool kit and air pump handy, plus regular pressure checks to ensure it's functional when needed. In practical use, brand specifics matter less than monitoring the spare's lifespan and condition – it's your safety backup, so don't wait until an emergency to inspect it.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What type of vehicle is the Multivan?

Multivan is a high-end MPV model under the Volkswagen brand, primarily used for premium business receptions and is an imported vehicle. Below is more information about the Multivan: 1. Body dimensions: The Multivan measures 4892mm in length, 1904mm in width, and 1995mm in height, with a wheelbase of 3000mm. It features a front-engine, four-wheel-drive layout. 2. Exterior design: The front fascia adopts Volkswagen's family-style design, with a wide chrome grille connected to the headlights, and the rear end is flat and simple. 3. Configuration: Equipped with ABS anti-lock braking system, EDL electronic stability system, electronic differential lock, EBV brake force distribution system, hill start assist, and more. 4. Powertrain: Powered by a 2.0TSI turbocharged engine, delivering a maximum horsepower of 204 PS and a peak torque of 350 Nm.
3
4
Share

What does it mean to restamp the vehicle identification number?

It means to re-engrave the vehicle identification number on the original vehicle. Below is relevant information about the vehicle identification number: 1. The vehicle identification number is the car's ID number: It is determined according to national vehicle management standards and contains information such as the vehicle's manufacturer, year, model, body type and code, engine code, and assembly location. 2. The vehicle identification number should consist of three parts: The first part is the World Manufacturer Identifier (WMI), the second part is the Vehicle Descriptor Section (VDS), and the third part is the Vehicle Indicator Section (VIS). New driving licenses usually print the VIN code in the "frame number" column. 3. The role of the vehicle identification number: It helps to correctly identify the vehicle model and also aids in accurate diagnosis and repair.
17
3
Share

What is the difference between fuel oil and gasoline?

The differences between fuel oil and gasoline lie in their properties and characteristics. Here are the specific details: 1. Different properties: Fuel oil is mainly made from cracked residue oil and straight-run residue oil of petroleum. Gasoline is obtained by refining different gasoline components such as straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components from petroleum refining, and then blending them with high-octane components. 2. Different characteristics: Fuel oil is characterized by high viscosity and contains a large amount of non-hydrocarbon compounds, gum, and asphaltenes. The important characteristics of gasoline are volatility, anti-knock properties, stability, and corrosiveness.
15
5
Share

Will points be deducted if the license plate anti-theft cap is not installed?

No points will be deducted. As long as all eight screws are installed on both the front and rear plates, traffic police will not deduct points, and the vehicle will pass the annual inspection smoothly. Points deduction related to license plate installation mainly occurs due to missing screws or failure to install them as required. If caught, the penalty will be for "failing to display the motor vehicle license plate as required," with a fine of 200 yuan imposed by the traffic management department, and in severe cases, 12 points may be deducted. More details are as follows: 1. Difficulty in installing the license plate anti-theft cap: There are two main reasons why the anti-theft cap may not fit. The first is that the base of the anti-theft cap was not screwed into the bolt before installation. If the base is not screwed in, the cap cannot be installed. The other reason is that the spring inside the cap is too protruding, preventing it from connecting with the base during installation. In this case, a small flathead screwdriver can be used to press the spring inward before installation. A useful tip for installing the anti-theft cap is to try screwing it into the base from left to right. 2. Function of the nuts: The nuts sent with the license plate are generally used with screws to secure them. However, most vehicle models come with nuts pre-installed from the factory, so these additional nuts may not be needed. Besides installing screws and nuts, anti-theft nuts should also be installed. These anti-theft nuts are sent along with the license plate. After installing the screws, the anti-theft nuts can be attached, making it impossible to remove the license plate without cutting the screws, thus achieving an anti-theft effect.
15
0
Share

How to Conduct the Annual Inspection for Vehicles Exempt from Inspection for 6 Years in the 6th Year?

For vehicles exempt from inspection for 6 years, an annual inspection is required in the 6th year. You need to provide the following documents: compulsory traffic insurance certificate, safety technical inspection certificate, original vehicle license, tax payment certificate for vehicle and vessel usage tax, and the original ID card of the vehicle owner. Then, proceed to the vehicle management office to complete the process. Here are some important notes for the annual inspection: 1. No Traffic Violations: Ensure there are no outstanding traffic violations for the vehicle to be inspected. If there are any violations, they must be resolved first to qualify for the annual inspection. 2. Unauthorized Modifications: Avoid unauthorized modifications such as replacing the vehicle body or engine. 3. Dirty Vehicle: A dirty vehicle may affect the inspection of the exterior and chassis. Additionally, since photos are taken during the inspection, a vehicle that is too dirty will not pass the inspection.
6
2
Share

What is the process of picking up a car and getting a license plate at a 4S store?

The process of picking up a car and getting a license plate at a 4S store is as follows: 1. Pay a deposit to order the car: In most cases, consumers usually place an order first when buying a car, which requires paying a deposit and signing a purchase contract with the 4S store. 2. Pay the balance: When the new car arrives at the store or is ready, the salesperson will contact the owner to come and pay the balance. It is important to carefully inspect the car before paying the balance to ensure there are no issues with the vehicle. 3. Pick up the car: After paying the balance, the car officially belongs to the owner. At this point, a temporary license plate can be obtained directly at the 4S store, which usually takes about half an hour. Once the temporary plate is issued, the car can be driven on the road. 4. License plate registration: Since the owner has requested the 4S store to handle the license plate registration, all the necessary procedures for the new car will be handled by the 4S store. The owner only needs to bring the required documents and drive the new car to the vehicle management office at the agreed time. The owner can then simply sit in the car while the representative from the 4S store completes all the license plate registration procedures. 5. Install the license plate: Once the official license plate is issued, it just needs to be installed on the vehicle. At this point, the entire car purchase process is complete.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.