What brand is the Sangita Volkswagen?

1 Answers
DeclanRose
07/30/25 8:30am
SAGITAR is a model launched by FAW-Volkswagen in the Chinese market on April 9, 2006. Its English name is "SAGITAR," and it is positioned as a "German high-performance sedan." The Sagitar brand was established in 2006 as a joint venture between Volkswagen AG of Germany and China's FAW. The first-generation Sagitar product was FAW-Volkswagen's response to market trends, introducing a new A-class sedan that Volkswagen had developed for the North American market. Relevant information about the car emblem is as follows: 1. Introduction: The "car emblem" is the abbreviation for the car logo, referring to the various brand logos of automobiles, which often serve as the representative symbols of car manufacturers. The car emblem includes: the car's trademark or manufacturer's logo, product label, engine model and production number, vehicle model and production number, and vehicle identification code. 2. Do not alter the car emblem arbitrarily: Unauthorized changes to the car emblem violate the "Motor Vehicle Management Regulations": The car emblem must correspond to the vehicle model and cannot be misused. If discovered, it will be dealt with according to the national regulations on motor vehicle safety technical conditions.
Was this review help?
18
4
Share
More Forum Discussions

How to Remove the Door Handle of the 18 New Magotan?

18 New Magotan door handle removal method: 1. Open the car door, there is a rubber pad on the door edge, pry off the rubber pad; 2. Use a T20 spline to remove this screw, then use a small flat-head screwdriver to pry from the gap between the lock block and the door panel edge, and gradually remove the door handle lock block; 3. Then use your left hand to pull the door handle backward, so that the door handle is separated from the door panel. The 18 New Magotan has a length, width, and height of 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2871mm. The 18 New Magotan is front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
7
3
Share

The Difference Between Keyless Start and Keyless Entry

The following are the differences between keyless start and keyless entry: 1. Different principles. The keyless entry system emphasizes the action of opening the car door, while the keyless start system is a system for starting and turning off the engine when the person is inside the car. Cars with a keyless start system all have a keyless entry system, but cars with a keyless entry system do not necessarily have a keyless start system. 2. The keyless start system can sometimes be interfered with by radar signals. 3. The keyless start system is more convenient to use. If you use a key to start the car, it takes more time and the operation is more troublesome. 4. The keyless start system needs to be charged, while the key start does not require charging. 5. The failure rate of the keyless start system is slightly higher than that of the key start system.
14
4
Share

Do Retreaded Tires Have Vent Spews?

Retreaded tires do not have vent spews, while some new tires may have them. Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth driving performance. They also maintain excellent traction between the wheels and the road surface. Retreaded tires are those that have been refurbished and can continue to be used. However, the strength and safety of retreaded tires are inferior to new tires, so they are generally only installed on the rear wheels and used alongside new tires, not recommended for front wheels. It is advisable for car owners to replace their tires every four years, even if the mileage is low during that period. Rubber products degrade over time, and using severely aged tires poses safety risks.
5
3
Share

How to Turn on the Seat Heating in Volkswagen Tayron?

Method to activate seat heating in Volkswagen Tayron: Press the seat heating function button, and the steering wheel heating adjustment button will appear on the central control screen. Adjust the temperature according to your needs. The seat cushion is equipped with non-woven fabric containing heating wires. When the seat heating switch is turned on, the heating wires are electrified, generating heat and gradually warming up the seat in a short time, similar to the principle of an electric blanket. The Tayron is a mid-size SUV under FAW-Volkswagen, with dimensions of 4589mm in length, 1860mm in width, and 1660mm in height. The Tayron offers a choice between a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.4-liter version delivers a maximum horsepower of 150 hp, while the 2.0-liter low-power version offers 186 hp, and the high-power version provides 220 hp.
12
2
Share

Which gear should be used when driving uphill with a Tiptronic transmission?

When climbing a slope with a Tiptronic transmission, you can switch to manual mode and then select 1st or 2nd gear to maintain the engine speed above 3000 RPM for optimal uphill performance. Additional information about the transmission is as follows: 1. Tiptronic combines manual and automatic gear shifting in one transmission system. 2. Automatic transmissions significantly reduce the impact of manual shifting on the vehicle's drivetrain, thereby extending the car's service life and improving ride comfort. 3. The Tiptronic transmission is designed to enhance the fuel efficiency and driving control of automatic transmissions by allowing drivers to manually decide the shift timing, which is normally determined by the computer. Moreover, Tiptronic transmissions combine the advantages of both automatic and manual transmissions.
12
4
Share

How to Clean a Car's Radiator?

Car radiator cleaning steps are as follows: 1. First, drain the coolant inside the radiator, prepare a jack, a waste liquid container, and a Phillips screwdriver, then open the engine hood and use the jack to lift one front wheel; ensure the vehicle is safely and stably lifted in drive gear, and the handbrake must be firmly engaged. 2. After draining the waste liquid, screw back the drain plug, but do not apply excessive force when tightening; because drain plugs are mostly made of anti-corrosion plastic material, excessive force may cause the threads to strip. 3. Refill the coolant, with the ratio of water to vinegar controlled between 1:9 or 2:8. 4. Use the coolant to fill from the expansion tank and flush the pipes and radiator slightly. 5. Start the engine.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.