···
Log in / Register

What brand is the pure electric vehicle Velite 7?

4 Answers
LaTravis
07/29/25 11:45am

Pure electric vehicle Velite 7 is a model under the Buick brand. The relevant introduction of Velite 7 is as follows: Body dimensions: The length, width, and height of Velite 7 are 4264mm, 1767mm, and 1618mm respectively, with a wheelbase of 2675mm, positioning it as a compact SUV. Body side: Velite 7 features distinct crossover elements, combining fashion and dynamism, and its side adopts a design approach of three-dimensional sculptural aesthetics, with strong overall line dynamics. Tires: Equipped with cyclone-style dual-tone wheels, the design is dynamic and aesthetically pleasing, matched with Michelin Primacy-4 tires, size 215/50-R17.

Was this review help?
12
2
Share
Evangeline
08/13/25 8:25pm

The Velite 7 is a pure electric vehicle under the Buick brand. I've been driving this car for over six months, and I feel that Buick, as an established brand under General Motors, has indeed put effort into electrification. This car features a stylish design, offering a quiet and hassle-free driving experience, with a city commuting range of around 450 kilometers. Charging is also quite convenient, as it takes only 30 minutes to charge from 20% to 80% using a fast-charging station. Maintenance costs are low, eliminating the hassle of oil changes, but attention should be paid to battery care to avoid deep discharge. I recommend taking a test drive before purchasing to experience its comfortable seats and intelligent driving assistance features, areas where Buick has done quite well.

Was this review help?
1
4
Share
Expand All
LaSamuel
10/08/25 6:17am

The Velite 7 comes from Buick, and I think its technical highlights lie in its highly efficient electric motor, the use of CATL batteries, and support for intelligent thermal management. I've researched electric vehicle parameters, and the Velite 7 has a range of nearly 500 kilometers with low energy consumption per 100 kilometers, allowing it to run for several days on a single charge. The Buick brand ensures safety and reliability, featuring systems like collision warning. Electrification is a major trend, and the Velite 7 offers good value for money in its price range, combining driving pleasure with environmental friendliness.

Was this review help?
2
0
Share
Expand All
StNatalie
11/21/25 7:36am

The Velite 7 is Buick's pure electric vehicle. I take my kids to and from school in it, and the spacious rear seats are very comfortable. The Buick brand is trustworthy, with comprehensive safety features such as lane-keeping assist. Charging an electric vehicle saves money, and once a week is enough. For daily family use, it's practical and eco-friendly.

Was this review help?
2
4
Share
Expand All
More Forum Discussions

Will the sunroof generally leak after a few years?

Generally, the sunroof will leak after a few years because the sealing rubber strip will age. Functions of the sunroof: It can quickly cool down the car, eliminate fog, and quickly exchange fresh air. Opening the sunroof while driving can rapidly increase the air circulation speed inside the car, thereby improving ventilation in the cabin. Precautions for using the sunroof: Open the sunroof in traffic jams to prevent exhaust fumes from entering the car. During traffic jams, all vehicles are stationary, and exhaust fumes will inevitably disperse in the air. Open the sunroof after exposure to sunlight to balance the interior temperature. In hot summers, after the car has been exposed to the sun, the interior temperature becomes very high. At this time, the owner should promptly open the sunroof.
4
0
Share

Is Dark or Light Tint Better for Car Window Films?

The front windshield should have a light tint, while the side and rear windows can have a darker tint. Here are the specific advantages and disadvantages of car window films: 1. Good Privacy: Most car window films are one-way, which can protect the owner's privacy, but the owner needs to verify the film's quality when choosing. 2. Anti-Explosion Effect: In case of an accident, the glass with film will stick together when shattered, preventing glass fragments from scattering, thus protecting passengers. 3. Thermal Insulation: High-quality car window films can provide thermal insulation. In summer, they can effectively control the rise in cabin temperature, and in winter, they can suppress heat dissipation, maintaining a comfortable temperature inside the car. 4. Reduced Light Transmission: The light transmission rate of car window films does not exceed 90%, especially when applied to the front windshield. Reduced light transmission can compromise driving safety.
6
2
Share

What does the shaking of a three-cylinder engine refer to in terms of location?

The shaking of a three-cylinder engine refers to the internal cylinder vibration of the engine. Due to torque imbalance, no matter how balance shafts are used to compensate, the physical characteristics of a three-cylinder engine determine that shaking will always occur. Since ignition occurs every 240 degrees and the crankshaft journal intervals are 120 degrees, this means that the crankshaft is also subjected to force when no power stroke occurs. This interaction characteristic results in uneven power transmission, and the vibration caused by torsional moments is more noticeable at lower engine speeds. The reasons for severe shaking in a three-cylinder engine are as follows: Dirty air filter: The air filter is designed to protect the engine and reduce wear, typically requiring replacement around 10,000 kilometers. If not replaced in time, insufficient air intake can cause idle speed to drop, leading to engine shaking. Replacing the filter element can resolve this issue. Spark plug lifespan: Spark plugs have a limited lifespan. After exceeding 30,000 to 40,000 kilometers, their ignition efficiency significantly decreases, which can affect ignition. This is one of the most common faults, and replacing all spark plugs can solve the problem. Abnormal water temperature: The engine operating temperature has a normal range. High water temperature can cause ignition timing to advance, alter the air-fuel mixture ratio, thin the engine oil viscosity, and reduce lubrication performance. Clogged fuel injectors: The fuel injectors in fuel-injected vehicles are critical components for fuel injection and have a long lifespan, potentially reaching hundreds of thousands of kilometers. However, gum deposits in gasoline can clog the injector nozzles, leading to inconsistent fuel injection among the injectors. This inconsistency causes uneven cylinder operation, resulting in engine shaking.
14
1
Share

How Long Can You Drive When the Brake Pads Squeak?

There is a sensor in the brake pads that triggers an alarm when contacted. It is still far from the limit state and can run for tens of thousands of kilometers. The specific details are as follows: 1. Function of brake pads: Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The effectiveness of all braking relies on the brake pads, making high-quality brake pads the guardian of both people and vehicles. 2. Composition of brake pads: Generally, they consist of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting the temperature distribution during coating. The heat insulation layer is made of non-heat-conductive materials to provide thermal insulation. The friction block is composed of friction materials and adhesives, which are pressed against the brake disc or drum during braking to generate friction, thereby achieving the purpose of decelerating and stopping the vehicle. Due to friction, the friction block gradually wears out. Generally, the lower the cost of the brake pads, the faster they wear. 3. Working principle of braking: It mainly relies on friction, utilizing the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, to convert the kinetic energy of the moving vehicle into heat energy through friction, thereby stopping the car. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and sub-cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat.
6
5
Share

Camshaft Alignment: E or I?

Camshaft aligns with E, because I stands for intake and E stands for exhaust. Notes on camshaft alignment: The inner diameter of the engine camshaft pulley has two grooves, which fit over a small protruding tab on the camshaft. In most factory-set vehicles, the E point on the camshaft pulley inner diameter is aligned with the camshaft, so the camshaft should correspond to the E point. Function of the camshaft: The camshaft is a component in a piston engine, responsible for controlling the opening and closing of the valves. Although in a four-stroke engine, the camshaft rotates at half the speed of the crankshaft, it still typically operates at high speeds and must endure significant torque. Therefore, the design requires high strength and robust support for the camshaft.
2
2
Share

Where is the problem with the engine shutting off due to parking oil pressure?

The issue of the engine shutting off due to parking oil pressure lies in the oil pressure sensor circuit or the oil pressure sensor itself. Oil pressure sensor circuit malfunction: If the oil pressure sensor circuit experiences a short circuit, open circuit, or poor connection, this type of fault will occur. Solution: It is recommended to check the continuity of the circuit one by one. Oil pressure sensor itself malfunction: The working principle of the oil pressure sensor is that the pressure directly acts on the diaphragm of the sensor, causing the diaphragm to produce a micro-displacement proportional to the medium pressure. This changes the resistance of the sensor, and an electronic circuit detects this change and converts it into a standard signal corresponding to the pressure. If the sensor itself malfunctions, it will naturally lead to this problem. Solution: Replace the oil pressure sensor with a new one.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.