What brand is the Prado 6-speed transmission?

1 Answers
ElainaAnn
07/29/25 11:02pm
The Prado uses a transmission produced by Aisin, model U750E. Transmission: The Prado is equipped with a 6-speed automatic transmission (hydraulic automatic transmission) and does not use a CVT transmission. Currently, there are four common types of automatic transmissions in vehicles: hydraulic automatic transmission, mechanical continuously variable automatic transmission (CVT), electronically controlled mechanical automatic transmission (AMT), and dual-clutch automatic transmission (DCT). Introduction to the Toyota Prado: The Prado is the latest model in the Toyota Land Cruiser series, featuring excellent power performance and meeting Euro III emission standards. Its advanced engine delivers strong output power and torque, paired with a highly rigid frame and reinforced suspension system, making even the roughest journeys comfortable and smooth.
Was this review help?
9
5
Share
More Forum Discussions

What is the best position to adjust the car rearview mirror? Video

Here are the methods to adjust the rearview mirrors to their optimal positions: 1. Left rearview mirror adjustment: Place the horizon line at the center line of the mirror, then adjust the edge of the car body to occupy 1/4 of the mirror image for best results. 2. Right rearview mirror adjustment: Since the driver's seat is on the left side, it's more difficult for the driver to grasp the situation on the right side of the car. Therefore, when adjusting the vertical position of the right rearview mirror, the ground area should be larger, occupying about 2/3 of the mirror's range. The horizontal position should also be adjusted so that the car body occupies 1/4 of the mirror's range for optimal results. 3. Central rearview mirror adjustment: Horizontally adjust the mirror so that its left edge just shows your right ear. For the vertical position, place the distant horizon at the center of the mirror, then adjust left and right to position the image of your right ear just at the left edge of the mirror for best results.
13
3
Share

Does car window tinting need to be registered with the DMV?

If the car is tinted with transparent film that does not change the color of the vehicle, then registration with the DMV is not required. However, if a color-changing film is applied, altering the body color by more than 30%, then registration with the DMV is necessary. To register the tinting, you need to prepare the Motor Vehicle Alteration Registration Application Form, the original and a copy of the vehicle owner's ID, the vehicle registration certificate, the original vehicle license, etc. Important Notes Except for the dedicated firefighting red, engineering rescue yellow, and the dedicated white-top-blue-bottom for national administrative law enforcement, other colors can be changed, but the entire body must not exceed two colors. Additionally, it is prohibited to imitate the paint schemes and similar emblem patterns used exclusively for police cars, fire trucks, ambulances, and engineering rescue vehicles. Generally, car decals do not cover too much area, so there should be no issues. Besides window tinting, the following modifications also require registration: Roof Rack Installation: Vehicles can be fitted with roof racks as long as they do not exceed the specified length. Most SUV models come with roof racks pre-installed by the manufacturer. The height of the rack must not exceed 30 cm, and many vehicles have pre-existing mounting points. It is important to choose a securely fixed roof rack. However, note that installing a roof rack requires updating the photo on the vehicle license. Running Boards and Bumpers: Running boards and bumpers were previously required to be original equipment. Currently, running boards are allowed as long as they do not extend beyond the vehicle body. For off-road vehicles, replacing the front bumper with a different style requires registration and updating the vehicle license photo. Wheels and Grilles: Modifying wheels and front grilles requires approval. Changing the style and material of wheels is common in modifications, but the wheel size, width, ET offset, and aspect ratio must remain unchanged. These changes also require updating the vehicle license photo at the local DMV. Braking System: Different brands of brake calipers and discs from reputable manufacturers can be chosen. Proper modifications can significantly improve braking performance, but altering the braking system requires approval.
16
4
Share

Can I switch from 95 to 92 gasoline after one year?

It is not advisable to switch from 95 to 92 gasoline after one year of use. 95-octane gasoline is suitable for engines with high compression ratios. If 92-octane gasoline is used in such engines, it can lead to abnormal combustion, knocking, and even engine seizure. Additionally, carbon deposits will accumulate faster than usual, resulting in insufficient power, engine wear, or even complete failure. Gasoline is a mixture, and while the chemical compositions of both types are relatively similar, their anti-knock properties differ. To ensure vehicle safety, it is recommended to use them separately. The difference between 92 and 95 gasoline lies in their octane ratings and quality levels. Here are the details: Different octane ratings: 92-octane gasoline contains 92% isooctane and 8% n-heptane. 95-octane gasoline contains 95% isooctane and 5% n-heptane. Different gasoline quality levels: The octane rating of gasoline represents its quality. Higher-octane gasoline has better anti-knock properties, allowing the engine to run more smoothly, reducing wear, and providing better protection for the engine. For vehicles designed for lower-octane gasoline, accidentally using higher-octane gasoline will not cause damage. However, the increased octane rating can alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for higher-octane gasoline, using lower-octane gasoline can cause engine knocking. The significantly lower octane rating reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke, making the engine run very unstably. Mild knocking may only increase noise without obvious damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring. If you accidentally mix or use the wrong octane gasoline, simply refuel with the correct type next time to restore normal operation. Some drivers believe that using higher-octane gasoline can improve performance, but this is unnecessary if the engine's compression ratio does not meet the required standard. At best, it may result in slightly lower carbon emissions and cleaner combustion.
5
2
Share

Why Do You Have to Wait Ten Days to Reschedule After Failing the Subject 2 Driving Test?

Failing the Subject 2 driving test requires a ten-day wait before rescheduling because ten days constitute one learning cycle for the subject. According to regulations, each subject exam can be taken once, and if failed, a retake is allowed. If the retake is not taken or is also failed, the exam process ends, and the applicant must reschedule. However, for Subject 2 and Subject 3 exams, rescheduling must be done at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skills test scores remain valid. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1/C2), the test includes five mandatory items: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. Some regions also include a sixth item: high-speed toll card collection. There are three key points to note for the Subject 2 exam: 1. **Priority for Scheduling**: Many factors influence scheduling priority, such as the number of times a student has failed, the number of students applying, and the remaining days until the exam deadline. The fewer days left, the higher the priority, moving the applicant up in the queue. Additionally, during peak seasons like summer and winter breaks when many students are applying, securing a slot can be challenging. 2. **Number of Retakes**: Including the first attempt, there are five chances to schedule the Subject 2 exam. If the first attempt (including the immediate retake) is failed, four more scheduling opportunities remain. Each attempt includes two tries—if the first try fails, an immediate second chance is given. In total, there are ten exam opportunities for Subject 2. Failing all ten attempts invalidates all previous scores, including those from Subject 1. 3. **Practice After Scheduling**: Once the exam is scheduled, excessive practice isn't necessary. There's no need to spend all day at the driving school "cramming." Instead, a few days before the exam, familiarize yourself with the test site and items. Another crucial point is revisiting the actual test site for a "site tour," even if you've seen it once or twice before. Since you failed, it's essential to review carefully, especially focusing on the items you struggled with.
17
4
Share

Can insurance be used for a punctured tire?

Tire punctures are not covered by insurance. Here are some tire maintenance tips: 1. Regularly check tread depth: The thickness of tire treads affects grip and drainage performance. It's crucial to inspect tread depth periodically, which can be done using the built-in tread wear indicators or a tread depth gauge. Generally, you should pay attention when tread depth falls below 3mm, and replace tires immediately when it reaches 1.6mm or less. 2. Monitor tire pressure: Maintain the recommended pressure specified in your vehicle's manual. Adjust if the pressure is too high or too low.
11
3
Share

What does the ADS in the Avancier mean?

The ADS in the Avancier refers to the Adaptive Damper System, which is an adjustable shock absorber. This is a relatively advanced technology equipped in vehicles. During the driving process, it can adjust the softness and hardness of the shock absorbers based on the driver's habits and the road conditions, thereby maximizing ride comfort. Below is some relevant information about the Avancier: The Avancier is a mid-size SUV produced by GAC Honda. The Honda Avancier is equipped with an engine coded as 15BD, which has a maximum power of 142 kW, a maximum torque of 243 Nm, a maximum power speed of 5,600 rpm, and a maximum torque speed ranging from 2,000 to 5,000 rpm.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.