What brand is the Patrol car?

Should You Press the Clutch or Brake First When Parking on a Slope?

When parking on a slope, you should press the clutch first. If you press the brake first when the vehicle speed is slow, it may easily cause the engine to stall. Pressing the clutch first avoids both inertial sliding and shaking. Below is a detailed introduction about the car clutch: Overview: The car clutch is located inside the flywheel housing between the engine and the transmission. The output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. Principle: The driving and driven parts of the clutch transmit torque through friction between contact surfaces, using liquid as a transmission medium, or magnetic transmission (electromagnetic clutch). This allows temporary separation and gradual engagement between the two parts, while permitting mutual rotation during transmission.

19

3

Share

Which vehicles use the Mercedes-Benz M272 engine?

Used in multiple models such as the C300, E300, GLK300, and R300. Below is relevant information about the engine: Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Expansion: For example, internal combustion engines typically convert chemical energy into mechanical energy. The term engine can refer to both the power-generating device and the entire machine that includes the power unit (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine also originates from English, with its original meaning referring to "a mechanical device that generates power."

11

5

Share

Can a Leaking Half Shaft Be Left Unrepaired?

Leaking half shafts should not be left unrepaired. Persistent leakage can lead to insufficient lubrication in the transmission, causing excessive gear wear. In mild cases, this may damage the transmission, while severe cases can result in complete transmission failure. Below is a detailed introduction about automotive transmissions: Overview: A transmission is a device that alters speed ratios and the direction of motion, typically located between the clutch and the central drive. It can modify the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under various working conditions. Gear-based transmissions generally consist of a housing and several gears. Classification: Automatic transmissions have become mainstream internationally, primarily including AT, AMT, CVT, and DCT types. Early AT transmission systems were predominantly 4AT. AT transmissions achieve automatic gear shifting through an electronically controlled automatic operating system. CVT is a true continuously variable transmission with fewer parts and a compact size. DCT features two clutches.

10

5

Share

What does the violation code 13570 mean?

The violation code 13570 means: Failure to stop and yield to pedestrians crossing at a crosswalk. According to Article 90 of the Road Traffic Safety Law, if a motor vehicle driver violates the road traffic safety laws and regulations regarding road passage, they shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. If there are other provisions in this law, the punishment shall be imposed in accordance with those provisions. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is as follows: the first digit is the behavior classification code, the second digit is the penalty point classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number of the specific provision. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Penalty point classification code, indicating the classification code for penalty points for traffic violations; Third, fourth, and fifth digits: Sequential code, indicating the sequential code of the behavior within the same behavior classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates a 3-point penalty, and the following "035" indicates the fifth item of the third provision in the 3-point penalty category. Behavior classification code violation descriptions: Codes starting with "1" indicate motor vehicle passage, e.g., 1003. Codes starting with "2" indicate non-motor vehicle passage, e.g., 2002. Codes starting with "3" indicate pedestrian or passenger passage, e.g., 3030. Codes starting with "4" indicate highway passage, e.g., 4002. Codes starting with "5" indicate other provisions, e.g., 5005. Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities directly under the central government, e.g., 7008. Codes starting with "8" indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to query motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the public security traffic management bureaus of various cities, find the vehicle violation query section, enter the license plate number and vehicle engine number, and click to query; Call the inquiry hotline (area code + 114) to query; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of failing to stop and yield to pedestrians crossing at a crosswalk, you can handle it through the Traffic Management app. After logging in, enter the violation processing business process, complete the handling, and make the payment.

11

2

Share

What Causes Abnormal Noise in Shock Absorbers?

Abnormal noise in shock absorbers is caused by damage to the shock absorber. Here are specific details about the symptoms of shock absorber failure: Abnormal noise: If the shock absorber makes abnormal noises when the vehicle is driving on bumpy roads, it is highly likely that the shock absorber is damaged. Oil leakage: Use a flashlight to inspect the shock absorber through the wheel arch. If oil leakage is found on the exterior of the shock absorber, it indicates that the shock absorber is already damaged. Loose chassis: When driving on bumpy roads, if the vehicle body exhibits excessive bouncing and unstable swaying, it usually indicates a problem with the shock absorbers.

18

3

Share

What is the standard for hill start?

The requirements for hill start can generally be divided into two situations. Below is a detailed introduction to the requirements for hill start in cars: General situation: Failing to use or incorrectly using the turn signal when entering the designated area results in a deduction of 10 points. If the front bumper of the car does not stop on the pole line after the vehicle stops, and the deviation is not more than 50cm, a deduction of 10 points is applied. After the vehicle stops, if the body is 30cm-50cm away from the road edge line, a deduction of 10 points is applied. If the vehicle rolls back less than 30cm during start, a deduction of 10 points is applied. Failing to use or incorrectly using the turn signal when starting or leaving the designated area results in a deduction of 10 points. Special situation: If the vehicle rides or presses the solid center line or edge line of the lane during driving, a deduction of 100 points is applied. After the vehicle stops, if the body is more than 50cm away from the road edge line, a deduction of 100 points is applied. If the parking brake is not tightened after stopping, a deduction of 10 points is applied. If the start time exceeds 30 seconds, a deduction of 100 points is applied. If the vehicle rolls back more than 30cm during start, a deduction of 100 points is applied.

12

4

Share

What brand is the Patrol car?

Should You Press the Clutch or Brake First When Parking on a Slope?

Which vehicles use the Mercedes-Benz M272 engine?

Can a Leaking Half Shaft Be Left Unrepaired?

What does the violation code 13570 mean?

What Causes Abnormal Noise in Shock Absorbers?

What is the standard for hill start?

Will Points Be Deducted for Rolling Back on a Slope?

Will points be deducted for starting on a slope within 30 centimeters?

Has the Hill Start Been Canceled?

What is the difference between mountain hazardous road and cliffside road?